• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2004-2010
• /
• 2009

The characteristic of the backbond for distribution service in WMNs(Wireless Mesh Networks) is that WMNs has multiple links connected to mesh points and dynamic routing protocol such as AODV to establish routing paths. When the terminal is communicating with the service through new AP, mobile nodes can resume communication by setting only the link between new AP and mobile node in the case of existing WLANs, but WMNs needs path establishment process in multihop networks. Our goal in this paper is to support the seamless communication service by eliminating path establishment delay in WMNs. We present the method that eliminates the handover latency by predicting the location of handover using GPS information and making the paths to their destination in advance. We implement mesh nodes using embedded board that contains proposed handover method and evaluate performance of handover latency. Our experiment shows that handover delay time is decreased from 2.47 to 0.05 seconds and data loss rate is decreased from 20~35% in the existing method to 0~10% level.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.6
• /
• pp.75-87
• /
• 2009

It is difficult to support QoS service in existing MAC Protocols in Wireless Mesh Network environments. while DCF can not support QoS, EDCA is operated with prioritized channel access method but can not give full performance. This thesis proposes frame management method to support QoS in Multi-Media DCF(MMDCF) MAC Protocol working in wireless mesh network. MMDCF uses ACH phase in TDMA frame to perform selection and elimination. Prioritized phases's count m and Fair Elimination phases's count n determine contention level and make string probability to only one win the contention. Forced TDMA Frame release method can support QoS requirements. MMDCF results good performance and good channel efficiency to support QoS requirements better than EDCA in multimedia stream environments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.1
• /
• pp.77-88
• /
• 2010

Wireless Mesh Networks are consist of mobility mesh clients and mesh routers. WMNs can communicate with heterogeneous networks such as IEEE 802.11, IEEE 802.15, IEEE 802.16 and sensor networks. WMNs which is based on ad hoc network are on research and developing to enhance WLANs, WPANs, or WMANs. WMNs can offer environment to serve human, service to person area, campus, and metro. But WMNs has many problems to solve about enhancing performance and generalization. Among them, Existing protocol layers has many problems enhancing to optimize WMNs. This document issues problems about WMNs in protocol layer and suggest the solutions. Also, suggests the requirements and the methods of QoS supporting issue.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.6
• /
• pp.83-90
• /
• 2009

Since traffic is aggregated to a MPP that acts as an Internet gateway, if traffic load is not balanced among the MPPs in a WMN, the overall performance of a WMN becomes poor even though the total traffic load is far below the capacity of the WMN. Therefore, in this paper, we propose a stochastic load balancing scheme where each MP (Mesh Point) probabilistically selects its serving MPP according to the congestion levels of MPPs. Through extensive simulations using ns-2, we have verified that our scheme can stabilize a WMN fast when congestion occurs and reduce packet loss rate by distributing traffic load of a congested MPP to multiple MPPs in the inverse proportional to their congestion levels. Compared to queue-based load balancing scheme, our method can decrease network stabilization time by 34 seconds, and reduce packet loss rate by 7.6%. Since the proposed scheme can reduce network stabilization time by efficiently using network resource, it is expected to contribute to the reliable operation of a WMN.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1198-1206
• /
• 2011

In this paper, we proposed a home network integrated dimmer switch using Z-wave Mesh Network. The dimmer switch come with wired and wireless network-based intelligent lighting switch that can be installed in a apartments with home network technologies. This switch is ease to install and operate. Furthermore, it provide power saving through efficient control of light using motion detect sensor and light intensity sensor. In order to evaluate the performance of our developed home network integrated dimmer switch, we performed a load performance test and from our result, it showed excellent performance in terms of lighting control and communication speed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.37-48
• /
• 2014

Wireless mesh networks have emerged as a key technology in environment that needs wireless multi-hop communication without infrastructure and IEEE 802.11s mesh network standard have currently been established. One of big differences between this standard and the legacy IEEE 802.11 is that MCCA MAC is included to support QoS. MCCA supports bandwidth reservations between neighbors, so it can satisfy the QoS of bandwidth guarantee. However, MCCA has dis-advantages as follow; 1) it can not guarantee end-to-end bandwidth, 2) in multi-interface multi-channel wireless environments, the IEEE 802.11s does not provide a bandwidth reservation protocol and a wireless channel assignment etc. In this paper, we have proposed MIMC R-HWMP, which expands R-HWMP that was proposed in our previous work[3], to support multi-interface multi-channel. By simulation, we showed end-to-end bandwidth guarantee and the increase in the available bandwidth in multi-interface multi-channel wireless mesh networks.

• Smart Structures and Systems
• /
• v.10 no.3
• /
• pp.271-298
• /
• 2012

Researchers have made significant progress in recent years towards realizing effective structural health monitoring (SHM) utilizing wireless smart sensor networks (WSSNs). These efforts have focused on improving the performance and robustness of such networks to achieve high quality data acquisition and distributed, in-network processing. One of the primary challenges still facing the use of smart sensors for long-term monitoring deployments is their limited power resources. Periodically accessing the sensor nodes to change batteries is not feasible or economical in many deployment cases. While energy harvesting techniques show promise for prolonging unattended network life, low power design and operation are still critically important. This research presents the WiSeMote: a new, fully integrated ultra-low power wireless smart sensor node and a flexible base station, both designed for long-term SHM deployments. The power consumption of the sensor nodes and base station has been minimized through careful hardware selection and the implementation of power-aware network software, without sacrificing flexibility and functionality.

• ETRI Journal
• /
• v.40 no.5
• /
• pp.582-591
• /
• 2018

In this paper, we present a performance analysis of large-scale multi-input multi-output (MIMO) systems for wireless backhaul networks. We focus on fully connected N nodes in a wireless meshed and multi-hop network topology. We also consider a large number of antennas at both the receiver and transmitter. We investigate the transmission schemes to support fully connected N nodes for half-duplex and full-duplex transmission, analyze the achievable ergodic sum rate among N nodes, and propose a closed-form expression of the achievable ergodic sum rate for each scheme. Furthermore, we present numerical evaluation results and compare the resuts with closed-form expressions.

• Journal of Convergence Society for SMB
• /
• v.4 no.4
• /
• pp.1-6
• /
• 2014

A wireless sensor network is being actively researched around the world that are connected to the mesh are a plurality of sensor nodes in a wireless manner that span different regions of the techniques. However, wireless communications use the limitation of resources, so it is very weak due to the properties of the network itself secure in comparison to the normal network. Wireless sensor network is divided into tapped-based attacks, forgery based attacks, denial of service attacks based largely by securities laws must defend against various attacks such as insertion of the wrong information being sent eavesdropping or modification of information, which is usually sensor network applications need to do. The countermeasure of sensor network attack is described in this research, and it will contribute to establish a secure sensor network communication.

• Journal of Korea Multimedia Society
• /
• v.16 no.8
• /
• pp.943-953
• /
• 2013

By the enormous increase in mobile nodes and diverse service requests on wireless networks, wireless mesh network(WMN) takes an interest as the solution for such requests. However, lots of issues which should be solved to deploy WMN are still remained. In the network layer, the performance improvement of routing protocols is the major issue of nowadays researches. WMN can be easily deployed by use of protocols for mobile ad-hoc networks(MANET) because it is much similar with MANET in multi-hop wireless routing and which node plays as host and router concurrently. Unfortunately, most routing protocols for MANET have drawbacks such as large traffic overhead and long delay time for route discovery due to the network extension. They are major factors of performance degradation of WMN and most researches are focused on them. In this paper, domain-based AODV which is amended AODV to be applied in hybrid WMN is proposed. The proposed scheme divides a hybrid WMN as several domains and performs route discovery by header layer domain. Therefore it can reduce the distance for route discovery as much as average hop count between domain header and member nodes. From the simulation, domain-based AODV was showed slowly increasing delay time due to the network extension.