• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.30-33
• /
• 1998

In this paper, 60 GHz indoor broadband wireless channels are measured with various configurations in a typical coffice environment. Mesurements are taken at nine positions of the room and the base-station antenna is placed either at the center or at an edge of the measurement room, and the remote-station antenna is either sharp beam or broad beam type. The rms delay spread(RDS) and normalized received power (NRP) are estimated from the measurements. Bit error rate simulations are performed using impulse responses for two measurement positions with QPSK/DQPSK OFDM modulation. Using sharp beam antenna results in superior performances than using broad beam antenna in terms of both bit error rates (BER) and NRP penalty. Also, placing the bese-station antenna at the center is superior to placing it at an edge in terms of BER and NRP.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.14-23
• /
• 2023

The cooperative communication systems using MIMO(multiple input multiple-output) relay are known as one of the most promising techniques to improve the performance and coverage of wireless communication systems. In this paper, we propose the cooperative communication systems using the relay with multi-antennas and DSTC(distributed space time coding) for decode-and-forward protocol. As using DSTC for DF(decode-and-forward), we can minimize the risk of error propagation at the wireless system using relay system. Also, the MIMO channel cab be formed by multi-antenna and DSTC at the MS(mobile station)-RS(relay station) and at the RS-BS(base station).Therefore, obtaining truly constructive the MIMO diversity and cooperative diversity gain from the proposed approach, the performance of system can be more improved than one of conventional system (relay with single antenna, no relay). The improvement in bit error rate is investigated through numerical analysis of the cooperative communication system with the proposed approach.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.343-344
• /
• 2007

In this paper, we study the signed-DLMS adaptive algorithm of wireless repeater for solving shadow region due to propagation between base station and mobile station. The the signed-DLMS algorithm reduces interference signals from multipath and solves the oscillation problem of repeater by estimation and cancellation. To efficiently reject interference signal, the signed-DLMS adaptive algorithm is applied. The computational complexities of the signed-DLMS are reduced verse standard LMS algorithm. Wireless ICS repeater based on signed-DLMS reduces the cost and is able to increase channel capacities.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.7
• /
• pp.3494-3510
• /
• 2019

Wireless sensor networks encounter energy saving as a major issue as the sensor nodes having no rechargeable batteries and also the resources are limited. Clustering of sensors play a pivotal role in energy saving of the deployed sensor nodes. However, in the cluster based wireless sensor network, the cluster heads tend to consume more energy for additional functions such as reception of data, aggregation and transmission of the received data to the base station. So, careful selection of cluster head and formation of cluster plays vital role in energy conservation and enhancement of lifetime of the wireless sensor networks. This study proposes a new mutation chemical reaction optimization (MCRO) which is an algorithm based energy efficient clustering protocol termed as MCRO-ECP, for wireless sensor networks. The proposed protocol is extensively developed with effective methods such as potential energy function and molecular structure encoding for cluster head selection and cluster formation. While developing potential functions for energy conservation, the following parameters are taken into account: neighbor node distance, base station distance, ratio of energy, intra-cluster distance, and CH node degree to make the MCRO-ECP protocol to be potential energy conserver. The proposed protocol is studied extensively and tested elaborately on NS2.35 Simulator under various senarios like varying the number of sensor nodes and CHs. A comparative study between the simulation results derived from the proposed MCRO-ECP protocol and the results of the already existing protocol, shows that MCRO-ECP protocol produces significantly better results in energy conservation, increase network life time, packets received by the BS and the convergence rate.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.214-217
• /
• 2001

This paper presents an implementation methodology of common Rf- integrated PCS base station system which, is capable of providing PCS services for 3 PCS carriers concurrently and wireless system performance evaluation data is shown. We have built up a common PCS base station system using a commonization module, which is consisted of a multi-channel combiner, duplexer, LNA, power divider, feeder line, and a common set of antennas. It was shown that the performance of the system within the total 30MHz PCS frequency range is uniformly acceptable and measured signal quality and coverage are equivalent to that of the individual PCS base station. It is expected that PCS carriers are able to save a huge amount of installation and maintenance expenses by installing and sharing this base station system. This paper forms a groundwork for deploying efficient and economical IMT-2000 network.

• Journal of Communications and Networks
• /
• v.8 no.1
• /
• pp.85-92
• /
• 2006

In this paper, we study a wireless cellular network design problem. It consists of selecting the location of the base station controllers and mobile service switching centres, selecting their types, designing the network into a tree-topology, and selecting the link types, while considering the location and the demand of base transceiver stations. We propose a constraint programming model and develop a heuristic combining local search and constraint programming techniques to find very good solutions in a reasonable amount of time for this category of problem. Numerical results show that our approach, on average, improves the results from the literature.

• Journal of Power System Engineering
• /
• v.11 no.1
• /
• pp.28-32
• /
• 2007

This research proposed that development of wireless condition monitoring system using WLAN network. It offers the prospect of improved performance that removed a current a coaxial cable and reduced overall cost of condition monitoring. Recently, there is an interesting concern for wireless system as an infrastructure technology construct ubiquitous computing environment in the future. High performance computing board makes minimization with integrate of a various functions which support wireless LAN network. Instead of wired coaxial cable using measurement system in industry, wireless LAN network assists industry automation and engineer's convenience. Developed system adapted wireless LAN network on shipboard with engine room and deck house, it also executes wireless measurement test on 8500TEU containership.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1936-1939
• /
• 2002

Much recent attention on wireless technologies s put on topology-less wireless network, in which all nodes an be mobile and can communicate over wireless links, due to its ease of deployment, high flexibility and low expenses. One key in topology-less wireless network is mobile base stations (MBSs), which provides access points or mobile terminals (MTs) to wireless backbone network. MBSs can move to anywhere in accordance with changes in geographical distribution of MTs. They serve as dynamic odes. However, in order to utilize network resources and take full advantage of this topology-less network, MBSs must move to suitable position according to the current tate of network use. Moreover, MBSs have to consider the distance among them to avoid the crash and gap area of MBSs. Therefore, this paper proposes MBS movement algorithm by implementing push-pull method to fulfill the corporation of MBSs and considering the center of covered MTs or centroid to satisfy the MT coverage. From the simulation results, the proposed algorithm increases the performance of system when comparing with the centroid-based algoriom〔7〕, such as coverage area, MT coverage and call drops rate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2770-2776
• /
• 2011

Mutual Interference scenarios between Wireless Broadband (WiBro) and Wireless LAN (WLAN) in DTV bands are assumed. Co-channel interference and adjacent channel interference are respectively evaluated in terms of carrier to interference ratio (C/I) by using Spectrum Engineering Advanced Monte Carlo Analysis Tool (SEAMCAT) based on the Monte-Carlo simulation method. For the simulation, three frequencies such as 185 MHz, 481 MHz and 687 MHz are chosen. Analysis results indicate that interference situation of using frequency of 185 MHz is the worst case, which requires longer protection distance between WiBro MS and WLAN User Equipment (UE), lower transmit power of WiBro Mobile Station (MS) and WiBro Base Station (BS) and WLAN UE and larger guard band. Comparing to cases of using frequency of 185 MHz and 481 MHz, interference situation of using frequency of 687 MHz is slighter. Therefore, using frequency of 687 MHz is easier for coexistence between WiBro and WLAN. Analysis results can be used as reference and guideline when planning the deployment of WiBro and WLAN in DTV bands.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.5
• /
• pp.921-927
• /
• 2006

The current DGPS technique is many problems that is permission of radio station using RF Wireless Modem, that is influence of geographic obstacle using radio wave, that is frequency interference, that is finiteness of frequency resources. In this paper, we are solved many elements, IM(Interface Module) replaces RF Wireless Modem, we suggest transmission technique of correction message using mobile phone, we researched Interface Module development which is linkage of DGPS receiver and mobile phone. IM can transmit correction message passing RS-232 port and modem communication control. IM of base station is initialized RS-232 port and modem to move station for correction message transmission, IM waited response mode. IM of move station is initialized RS-232 port and modem, IM requests hand shaking to base station, completed connection establishment. Users are worked Differential surveying using receiving correction message between mobile phones.