• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(3)
• /
• pp.47-50
• /
• 2002

In this paper, the efficient transmission technique of real time video data over 3G wireless networks is presented. To understand the transmission characteristic of 3G networks on real time video data, we implemented the data transport structure of 3G wireless networks. Also this research is based on current 3G wireless network specification of 3GPP, 3GPP2 standard organization to evaluate the result over real 3G wireless network environment. The retransmission by radio link layer results in the delay factor. To implement video data transmission efficiently, we Propose to use both no-retransmission and forward error correction method.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2006년도 추계학술대회 학술발표 논문집 제16권 제2호
• /
• pp.289-292
• /
• 2006

In this paper, a wireless control network based on IEEE 802.15.4 MAC protocol is proposed. The superframe of IEEE 802.15.4 is applied to the proposed wireless control network. The transmission and bandwidth management method are proposed for efficient transmission in the superframe. By these methods, the proposed wireless control network protocol is able to transmit three types of data (periodic data, sporadic data, and non real-time message), and guarantee real-time transmission within deadline.

• 한국통신학회논문지
• /
• 제38A권4호
• /
• pp.381-391
• /
• 2013

비압축 영상의 무선 전송은 압축된 영상의 전송과 비교해서 높은 영상 품질과 낮은 지연을 보장한다. 비록 현재의 무선 전송 기술로는 수 Gb/s에 이르는 Full HD급의 영상을 전송하기는 어렵지만 ultra-wideband (UWB)와 같은 몇 가지 종류의 무선 기술은 1 Gb/s의 데이터 전송율을 보장하며 이를 이용하여 휴대용 멀티미디어 기기에서 비압축 영상 전송 서비스를 제공할 수 있다. 본 논문에서는 휴대용 멀티미디어 기기에서의 무선 영상 미러링 서비스를 위한 비압축 영상 전송 시스템을 제안한다. 먼저 단일 또는 다수의 1 Gb/s UWB 기술을 이용한 비압축 영상 전송 성능을 시뮬레이션을 통해 비교하였고 하드웨어로 구현된 비압축 영상 전송 블록과 Gb/s급 무선 MAC 가속기 블록에 대해 설명하였다. 마지막으로 다중 UWB 물리계층을 사용한 HD급 비압축 영상 전송 시스템의 구현 및 시연에 대해 설명하였다.

• 인터넷정보학회논문지
• /
• 제10권3호
• /
• pp.85-94
• /
• 2009

본 논문에서는 무선 센서 네트워크에서의 에너지 효율적인 전송방안을 제안하고 이에 대한 이론적 분석을 제시하고자 한다. 본 논문에서 제안하는 전송기법은 채널 상태가 상대적으로 좋을 때만 전송을 시도하는 opportunistic transmission에 기반한 이진 결정 (binary-decision) 기반 전송이다. 이진 결정 기반 전송에서는 Markov decision process (MDP)를 이용하여 성공적인 전송을 위한 최적의 채널 임계값을 도출하였다. 다양한 시뮬레이션을 통해 제안하는 전송기법의 성능을 에너지 효율성과 전송율 측면에서 분석하였다.

• Journal of information and communication convergence engineering
• /
• 제4권2호
• /
• pp.71-74
• /
• 2006

A basic access method about IEEE 802.11 MAC layer protocol using IEEE 802.11 wireless LANs is the DCF thatis based on the CSMA/CA. But, cause of IEEE 802.11 MAC layer uses original backoff algorithm (exponential backoff method), when collision occurred, the size of contention windows increases the double size Also, a time of packet transmission delay increases and efficienty is decreased by original backoff scheme. In this paper, we have analyzed TCP packet transmission time of IEEE 802.11 MAC DCF protocol for wireless LANs a proposed enhanced backoff algorithm. It is considered the transmission time of transmission control protocol (TCP) packet on the orthogonal frequency division multiplexing (OFDM) in additive white gaussian noise (A WGN) and Rician fading channel. From the results, a proposed enhanced backoff algorithm produces a better performance improvement than an original backoff in wireless LAN environment. Also, in OFDM/quadrature phase shift keying channel (QPSK), we can achieve that the transmission time in wireless channel decreases as the TCP packet size increases and based on the data collected, we can infer the correlation between packet size and the transmission time, allowing for an inference of the optimal packet size in the TCP layer.

• 한국통신학회논문지
• /
• 제31권10B호
• /
• pp.872-882
• /
• 2006

무선 메쉬 네트워크(Wireless Mesh Network) 기술은 유선과 비슷한 전송속도를 갖은 무선 통신 기술을 이용해서 문선 백본망으로 사용하는 기술을 의미하며, 토폴로지는 메쉬 형태를 갖는다. 이러한 형태는 Ad-hoc네트워크와 유사란 점을 가지고 있지만, 운용목적과 내부동작에서 다르기 때문에 경로 설정 방법과 경로를 설정하기 위한 메트릭이 요구된다. 본 논문에서는 데이터를 전달하기 위한 루프가 없는 효율적인 다중 흡 전달을 위한 다중 경로생성 방법과 Hop-by-hop 라우팅기법을 기반으로 경로설정을 하고 물리적인 링크의 성능과 다중 홉 전달을 위한 메트릭(ETR : Expected Transmission Rate)을 제안한다.

• 한국멀티미디어학회논문지
• /
• 제18권4호
• /
• pp.541-545
• /
• 2015

Wireless power transmission which can transmit the electrical power through the air is the promise technology. In this paper, the effects of wireless power transmission using magnetic resonance method have been studied on coil material, resonance frequency, and antenna type. We have found copper tube as a coil material had the better characteristics than that of enameled wire, and the optimal resonance frequency was 13.6MHz in the range of from 1MHz to 20MHz. And the double square spiral type antenna as a load coil was the best. The power transmission distance by magnetic resonance method with 13.6MHz was 150 cm.

• 대한산업공학회지
• /
• 제41권2호
• /
• pp.220-224
• /
• 2015

The DCF (Dcistributed Coordination Function) and PCF (Point Coordination Function) are the basic MAC (Medium Access Control) protocols of IEEE 802.11 wireless LANs. According to the DCF, each node performs the exponential backoff algorithm before the transmission of its data frame. Each node doubles the backoff waiting time before the transmission of its data frame whenever it detects the transmission collision with other nodes. Therefore, as the number of the active nodes having the data frames to transmit increases, the overall MAC performance of the DCF decreases. On the other hand, according to the PCF, each node is granted the transmission opportunity by which the PCF transmission is possible without the collision with other nodes. Therefore, as the number of the active nodes increases, the MAC performance of the PCF increases, In this paper, considering the tradeoff of MAC performance between the DCF and PCF, a hybrid MAC protocol is proposed to enhance the performance of IEEE 802.11 wireless LANs.

• Journal of Ubiquitous Convergence Technology
• /
• 제1권1호
• /
• pp.35-41
• /
• 2007

In mobile ad-hoc wireless networks, one of the most important challenging issues is how to conserve energy, maximizing the lifetime of route(networks) in the view points of both power and mobility of nodes. However, many transmission methods presented in the previous works can not satisfy these two objectives simultaneously. To obtain these two goals, in this paper we propose an architecture to support power saving transmission services with route stability in mobile ad-hoc wireless networks. The proposed architecture consists of two parts, the underlying route stability method to support route(network) lifetime and the power saving transmission methods. The performance evaluation of the proposed architecture is achieved via simulation and analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.65-67
• /
• 2004

Change of state of Channel between two wireless terminals which is caused by noise and multiple environmental conditions for happens frequently from the Wireles Network. So, When it is like that planning a wireless network protocol or performance analysis, it follows to change of state of time-varying channel and packet the analysis against a transmission efficiency is necessary. In this paper, analyzes transmission time of a packet and a packet in a time-varying and packet based Wireless Network. To reflecte the feature of the time-varying channel, we use a Signal Flow Graph model. From the model the mean of transmission time and the mean of queue length of the packet are analyzed in terms of the packet distribution function, the packet transmission service time, and the PER of the time-varying channel.