• Journal of Power Electronics
• /
• v.19 no.3
• /
• pp.827-834
• /
• 2019

Wireless power transfer via coupled magnetic resonances has been a hot research topic in recent years. In addition, the number of related devices has also been increasing. However, reverse signals transfer is often required in addition to wireless power transfer. The structure of the circuit for a wireless power transfer system via coupled magnetic resonances is analyzed. The advantages and disadvantages of both parallel compensation and series compensation are listed. Then the compensation characteristics of the inductor, capacitor and resistor were studied and an appropriate compensation method was selected. The reverse signals can be transferred by controlling the compensation of the resistor. In addition, it can be demodulated by extracting the change of the primary current. A 3.3 MHz resonant frequency with a 100 kHz reverse signals transfer system platform was established in the laboratory. Experimental results demonstrate that wireless power and reverse signals can be transferred synchronously.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.10
• /
• pp.86-93
• /
• 2004

This paper presents the remote measurement of the ECU signals adopted with KWP 2000 protocol using the wireless communication technique of bluetooth. The bluetooth technology will be the most promising network paradigm which can open the new area in the information technology. Especially, bluetooth module is able to link all the electrical products and personal computers to cellular phone or PDA. This research has a try to design a wireless measurement model of ECU signal based on the car telemery system using bluetooth device. In order to measure the ECU signals, we designed the interface circuits which is able to communicate between the ECU system and the terminal circuits according to the ISO, SAE regulation of communication protocol standard. A microprocessor S3c341 OX is used for the system control and communication of ECU signals. The embedded system software is programmed to measure the ECU signals using the ARM compiler and ANCI C based on Micro/OS-II kernel to communicate between two bluetooth modules using bluetooth stack. The remote measurement of ECU signals using the bluetooth was designed and implemented to evaluate the performance of wireless network to the transmit measurement data. The possibility for the remote measurement of the self diagnosis signals of ECU adopted with KWP2000 protocol verified through the developed systems and algorithms in embedded system.

• Smart Structures and Systems
• /
• v.7 no.1
• /
• pp.59-82
• /
• 2011

In this study, an output-only modal identification approach is proposed for decentralized wireless sensor nodes used for linear structural systems. The following approaches are implemented to achieve the objective. Firstly, an output-only modal identification method is selected for decentralized wireless sensor networks. Secondly, the effect of time-unsynchronization is assessed with respect to the accuracy of modal identification analysis. Time-unsynchronized signals are analytically examined to quantify uncertainties and their corresponding errors in modal identification results. Thirdly, a modified approach using complex mode shapes is proposed to reduce the unsynchronization-induced errors in modal identification. In the new way, complex mode shapes are extracted from unsynchronized signals to deal both with modal amplitudes and with phase angles. Finally, the feasibility of the proposed approach is evaluated from numerical and experimental tests by comparing with the performance of existing approach using real mode shapes.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.107-114
• /
• 2023

In this paper, the results of experiments conducted in indoor wired and outdoor wireless environments to reduce the interference impact of 5G mobile communication on fixed satellite services using RF Interference Reduction Module (IRM) are presented. Test results for interference signals with a 100MHz bandwidth in a wired environment demonstrate that RF IRM can reduce interference by more than 20dB in a 100MHz bandwidth. The performance of RF IRM was also tested in the S-band wireless environments. In the S-band wireless environments with interference signals having a 20MHz bandwidth, RF IRM exhibits interference reduction performance of 12-15dB, for signals with a 50MHz bandwidth, it shows 10-12dB interference reduction, and for signals with a 100MHz bandwidth, it demonstrates 5-10dB interference reduction. This paper shows that RF IRM can be used not only within transceivers but also in wireless environments to mitigate interference.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1067-1070
• /
• 2003

In this paper, we present a remote measurement system for the wireless monitoring of ECU Sensor Signals of vehicle. In order to measure the ECU sensor signals, the interface circuit is designed to communicate ECU and designed terminal wirelessly according to the ISO, SAE regulation of communication protocol standard. A micro-controller 80C196KC is used for communicating ECU sensor signals. ECU sensor signals are transmitted to the RF-wireless terminal that was developed using the micro controller 80386EX. LCD, and RF-module. 80386EX software is programmed to monitor the ECU sensor signals using the Borland C++ compiler in which the half duplex method was used for the RS232 communication. The algorithms for measuring the ECU sensor signals are verified to monitor ECU state. At the same time, the information to fix the vehicle's problem can be shown on the developed monitoring software. The possibility for remote measurement of ECU sensor signals using 80386EX is also verified through the developed systems and algorithms.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.131-132
• /
• 2007

In this paper, we designed and implemented bio-signals transmission and storage system using wireless sensor network based on ZigBee. Wireless sensor network is organized with routing protocol based on tree structure. The data is transmitted to monitoring system based on SIP. ZigBee will be used as various combinations with other wireless network technologies for application purposes.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.6
• /
• pp.55-62
• /
• 2016

In this paper, we present indoor positioning technologies using the wireless signal categorizing them into triangulation based, fingerprinting based, and cell ID based technologies. We describe several representative techniques for each of them emphasizing their strengths and weaknesses. We define important performance issues for indoor positioning technologies and analyze recent technologies according to the performance issues. We believe that this paper provide wise view and necessary information for recent indoor positioning technologies using wireless signals.

• Journal of IKEEE
• /
• v.25 no.2
• /
• pp.252-260
• /
• 2021

In this paper, a method of using Software Defined Radio (SDR) is proposed for improving the accuracy of identifying two kinds of signals as Wireless Fidelity (Wi-Fi) signal and Bluetooth signal at the same frequency band of 2.4 GHz based on the time-domain signal characteristic. An SDR device was set up for collecting transmitting signals from Wi-Fi access points (Wi-Fi) and mobile phones (Bluetooth). Different characteristics between Wi-Fi and Bluetooth signals were extracted from the measured result. The SDR device is programmed with a Wi-Fi and Bluetooth detection algorithm and a collision detection algorithm to detect and verify the Wi-Fi and Bluetooth signals based on collected IQ data. These methods are necessary for some applications like wireless communication optimization, Wi-Fi fingerprint localization, which helps to avoid interference and collision between two kinds of signals.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.5
• /
• pp.159-167
• /
• 2002

In this paper. we present a new method for monitoring of ECU's self diagnostic signals of vehicle without wire. In order to measure the ECU's self diagnostic signals, the interfaced circuit is designed to communicate ECU and designed terminal according to the IOS, SAE regulation of communication protocol standard. Micro-processor 80C196KC is used for communicating ECU's self diagnositc signals and the results are sent to the wireless terminal and PC monitoring system. Wireless terminal is also developed by 80C196KC, LCD, RF module, and keypad. The command from the keypad is sent to ECU through RF module and the result show on the Graphic LCD in real time. Software on PC is developed to monitor the ECU's self diagnostic signals using the Visual C++ complier in which RS232 port is programmed by half duplex method. The algorithms for measuring the ECU's self diagnostic signals are verified to monitor both ECU and portable terminal state. At the same time, the information to fix the vehicle's problem can be shown on the developed software. The possibility for remote measurement of ECU self diagnostic signal is verified through the developed systems and algorithms.

• Journal of Korea Multimedia Society
• /
• v.18 no.5
• /
• pp.652-662
• /
• 2015

It is necessary to develop small, implantable bio-telemetry systems which can measure and transmit patients' bio-signals from internal body to external receiver. When measuring bio-signals, like electrical bio-signals, acoustic bio-signal measurement has also a big clinical usefulness. But, sound signal has larger frequency bandwidth than any other bio-signals. When considering these issues, a wireless telemetry system which has rapid data transmission rate proportional to wide frequency bandwidth is necessary to be developed. The bluetooth module is used to overcome the data rate limitation caused by the large frequency bandwidth. In this paper, a novel multimedia bluetooth biotelemetry system was developed which consists of transmitter module located in the body and receiver device located outside of the body. The transmitter consists of microphone, bluetooth, and wireless charging device. And the receiver consists of bluetooth and codec system. The sound inside the skin is captured by microphone and sent to receiver by bluetooth while charging. The wireless charging system constantly supplies the electric power to the system. To verify the performance of the developed system, an in vitro experiment has been performed. The results show that the proposed biotelemetry system has ability to acquire the sound signals under the skin.