• Journal of Communications and Networks
• /
• v.9 no.3
• /
• pp.265-273
• /
• 2007

This paper expands an analytical performance model of 802.11 to accurately estimate throughput and energy demand of 802.11-based wireless sensor network (WSN) when sensor nodes employ Reed-Solomon (RS) codes, one of block forward error correction (FEC) techniques. This model evaluates these two metrics as a function of the channel bit error rate (BER) and the RS symbol size. Since the basic recovery unit of RS codes is a symbol not a bit, the symbol size affects the WSN performance even if each packet carries the same amount of FEC check bits. The larger size is more effective to recover long-lasting error bursts although it increases the computational complexity of encoding and decoding RS codes. For applying the extended model to WSNs, this paper collects traffic traces from a WSN consisting of two TIP50CM sensor nodes and measures its energy consumption for processing RS codes. Based on traces, it approximates WSN channels with Gilbert models. The computational analyses confirm that the adoption of RS codes in 802.11 significantly improves its throughput and energy efficiency of WSNs with a high BER. They also predict that the choice of an appropriate RS symbol size causes a lot of difference in throughput and power waste over short-term durations while the symbol size rarely affects the long-term average of these metrics.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.7 s.349
• /
• pp.14-23
• /
• 2006

Wireless Sensor Network(WSN) consists of huge number of sensor nodes which are small and inexpensive with very limited resources. The public key cryptography is undesirable to be used in WSN because of the limitations of the resources. A key management and predistribution techniques are required to apply the symmetric key cryptography in such a big network. Many key predistribution techniques and approaches have been proposed, but most of-them didn't consider the real WSN assumptions, In this paper, we propose a security framework that is based on a hierarchical grid for WSN considering the proper assumptions of the communication traffic and required connectivity. We apply simple keying material distribution scheme to measure the value of our framework. Finally, we provide security analysis for possible security threats in WSN.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.805-808
• /
• 2009

Security has become a major concern for many real world applications for wireless sensor networks (WSN). In this domain, many security solutions have been proposed. Usually, all these approaches are based on wellknown cryptographic algorithms. At the same time, performance studies have shown that the applicability of sensor networks strongly depends on effective routing decisions or energy aware wireless communication. In this paper, we analyses vulnerability and security mechanisms in wireless sensor networks.

• Journal of IKEEE
• /
• v.20 no.4
• /
• pp.449-453
• /
• 2016

Failures would occur because of the hostile nature environment in Wireless Sensor Networks (WSNs) which is deployed randomly. Therefore, considering faults in WSNs is essential when we design WSN. This paper classified fault model in the sensor node. Especially, this paper proposed new error correcting code scheme and fault recovery algorithm in the CH(Cluster Head) node. For the range of the small size information (<16), the parity size of the proposed code scheme has the same parity length compared with the Hamming code, and it has a benefit to generate code word very simple way. This is very essential to maintain reliability in WSN with increase power efficiency.

• Journal of IKEEE
• /
• v.21 no.4
• /
• pp.348-352
• /
• 2017

A lot of researches have done for WSN(Wireless Sensor Networks) authentication. Those are divided by whether using certificates or not for the authentication. In this paper, we proposed certificateless protocol. As simplifying the process of authentication, overall the process become faster and the load of the sensor node is decreased. Using the method we proposed, the energy consumption is decreased. That is because instead using keyed hash authentication code(HMAC) simple one way hash function was used. The study confirmed that it could operate on sensor nodes with extremely limited resources and low processing power.

• Journal of Communications and Networks
• /
• v.18 no.2
• /
• pp.201-209
• /
• 2016

In wireless sensor networks (WSNs) duty cycling has been an imperative choice to reduce idle listening but it introduces sleep delay. Thus, the conventional WSN medium access control protocols are bound by the energy-latency tradeoff. To break through the tradeoff, we propose a radio wave sensor called radio frequency (RF) wakeup sensor that is dedicated to sense the presence of a RF signal. The distinctive feature of our design is that the RF wakeup sensor can provide the same sensitivity but with two orders of magnitude less energy than the underlying RF module. With RF wakeup sensor a sensor node no longer requires duty cycling. Instead, it can maintain a sleep state until its RF wakeup sensor detects a communication signal. According to our analysis, the response time of the RF wakeup sensor is much shorter than the minimum transmission time of a typical communication module. Therefore, we apply duty cycling to the RF wakeup sensor to further reduce the energy consumption without performance degradation. We evaluate the circuital characteristics of our RF wakeup sensor design by using Advanced Design System 2009 simulator. The results show that RF wakeup sensor allows a sensor node to completely turn off their communication module by performing the around-the-clock carrier sensing while it consumes only 0.07% energy of an idle communication module.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.4
• /
• pp.177-184
• /
• 2008

The design goal of protocols in wireless sensor networks (WSN) is mainly energy efficiency because of their stringent resource and energy constraints. In this paper, we propose a simple cross-layered protocol for WSNs, so called EATD(Energy-Aware Tree based Delivery scheme). EATD is a tree-based energy aware data delivery algorithm by using a SYNC packet with link and node cost to maximize the network lifetime. Our simulation results show significant improvements compared with existing schemes in terms of energy efficiency and delay.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.3
• /
• pp.180-190
• /
• 2011

Efficient energy consumption is a critical factor for deployment and operation of wireless sensor networks (WSNs). To achieve energy efficiency there have been several hierarchical routing protocols that organize sensors into clusters where one sensor is a cluster-head to forward messages received from its cluster-member sensors to the base station of the WSN. In this paper, we propose a self-organized clustering method for cluster-head selection and cluster based routing for a WSN. To select cluster-heads and organize clustermembers for each cluster, every sensor uses only local information and simple decision mechanisms which are aimed at configuring a self-organized system. By these self-organized interactions among sensors and selforganized selection of cluster-heads, the suggested method can form clusters for a WSN and decide routing paths energy efficiently. We compare our clustering method with a clustering method that is a well known routing protocol for the WSNs. In our computational experiments, we show that the energy consumptions and the lifetimes of our method are better than those of the compared method. The experiments also shows that the suggested method demonstrate properly some self-organized properties such as robustness and adaptability against uncertainty for WSN's.

• The KIPS Transactions:PartC
• /
• v.19C no.3
• /
• pp.209-214
• /
• 2012

Time synchronization is important role in a network, especially in Wireless Sensor Network (WSN) which is required for time-critical applications such as surveillance, tracking, data fusion and scheduling. Time synchronization in WSN should meet the other different requirements than the one in other networks because WSN has critical resource constraints, especially power consumption. This paper presents a new time synchronization scheme for WSN, which is energy efficient by reducing communication overhead. Simulation test shows this new scheme has better energy efficiency and performance of accuracy than existing schemes proposed previously.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.361-364
• /
• 2008

The Application Model in Wireless Sensor Networks(WSNs) consist of wireless sensor network based on sensor hardwares which is combined the micro-controller, chipset for wireless communication and sensors, middleware for dealing with data processing and user application for common service. Applications in WSN have been applied for environmental monitoring, smart factory and have concentrated the services based on remote monitoring applications which is difficult to watch the situation by human. In this paper, we described the construction model for applying for the Ubiquitous disaster prevention system and deal with its conformity. The proposed system includes the selecting the wireless sensor hardware, routing technique for u-Disaster Prevention, composition of middleware and web-interface for application services.