• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2747-2749
• /
• 2000

The KEPRI has been developing the medium/small scale Distribution Automation System(DAS) that adopts wireless transmission media for exchanging information between master and remote terminals. It was concluded that Short Message Service(SMS) of Personal Communication Service(PCS) was the best wireless transmission media for the medium/small scale DAS in the last year. However. we had problem that PCS had long transmission delay. Therefore. SMS phones will be substituted with Radio Link Protocol(RLP) modems having transmission delay less than 5 seconds. This paper describes wireless networks for DAS, practical experience.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권6호
• /
• pp.562-568
• /
• 2013

This paper presents a design of a wireless power transfer system based on magnetic resonant coupling technology with in-band wireless communication. To increase the transmission distance and compensate for the change in the effective capacitance due to the varying distance, the proposed system used a loop antenna with a selectable capacitor array. Because the increased transmission distance enables multiple charging, we added a communication protocol operated at the same frequency band to manage a network and control power circuits. In order to achieve the efficient bandwidth in both power transfer mode and communication mode, the S-parameters of the loop antennas are adjusted by switching a series resistor. Our test results showed that the loop antenna achieved a high Q factor in power transfer mode and enough passband in communication mode.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권4호
• /
• pp.1854-1868
• /
• 2018

A wireless body-sensor network (WBSN) refers to a network-configured environment in which sensors are placed on both the inside and outside of the human body. The sensors are much smaller and the energy is more constrained when compared to traditional wireless sensor network (WSN) environments. The critical nature of the energy-constraint issue in WBSN environments has led to numerous studies on the reduction of energy consumption of WBSN sensors. The transmission-power-control (TPC) technique adjusts the transmission-power level (TPL) of sensors in the WBSN and reduces the energy consumption that occurs during communications. To elaborate, when transmission sensors and reception sensors are placed in various parts of the human body, the transmission sensors regularly send sensor data to the reception sensors. As the reception sensors receive data from the transmission sensors, real-time measurements of the received signal-strength indication (RSSI), which is the value that indicates the channel status, are taken to determine the TPL that suits the current-channel status. This TPL information is then sent back to the transmission sensors. The transmission sensors adjust their current TPL based on the TPL that they receive from the reception sensors. The initial TPC algorithm made linear or binary adjustments using only the information of the current-channel status. However, because various data in the WBSN environment can be utilized to create a more efficient TPC algorithm, many different types of TPC algorithms that combine human movements or fuse TPC with other algorithms have emerged. This paper defines and discusses the design and development process of an efficient TPC algorithm for WBSNs. We will describe the WBSN characteristics, model, and closed-loop mechanism, followed by an examination of recent TPC studies.

• 한국인터넷방송통신학회논문지
• /
• 제11권5호
• /
• pp.35-40
• /
• 2011

본 논문에서는, 무선 전력전송 방식을 이용한 이동로봇의 자동 충전 시스템을 개발한다. 기존 이동로봇의 자동 충전이 기구적 접촉에 의해 이루어졌던 것에 비해, 무선 전력전송을 이용한 충전 방법은 전자기 유도 방식에 의한 비접촉 충전시스템이다. 이 방식은 송수신 코일이 바른 위치에 정렬되어야만 효율적인 충전이 가능하다. 이 문제를 해결하기 위하여, 영상정보를 통해 충전시스템의 원형 송신 코일의 변형률을 인식하여, 효율적인 자동충전이 가능하도록 이동로봇의 자세를 제어한다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권11호
• /
• pp.654-659
• /
• 2005

An improved power supply for APD(Avalanche Photo Diode) with a received optical power monitoring circuit allows the received optical power increase temporary without of the degradation of the electrical signal. For the cost reduction and simple fabrication, an improved power supply has been proposed that it was designed for driving a APD as a receiving device of a wireless optical transmission system. It was demonstrated that it was possible to improve a dynamic range by compensating the temperature coefficient of the APD up to 1.0 V/$^{\circ}C$ through the power supply. Also, for an efficient transmission at the receiver end, a simple structure of a single cylindrical micro-lens configuration was used in conjunction with the laser diode to partially compensate a laser beam ellipticity. For this purpose, an astigmatism introduced by the micro-lens is utilized for the additional compensation of the beam ellipticity at the receiver end. In this paper, it is demonstrated that an efficient beam shaping is realized by using the proposed configuration consisting of the single lens attached to the laser diode.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제3권11호
• /
• pp.393-402
• /
• 2014

최근 스마트폰을 포함한 사물 인터넷(IoT) 기술 기반의 스마트 기기의 급속한 확산에 따라 IEEE 802.11 무선 랜에서 전력 소비 또한 급격히 증가하고 있다. 특히 모바일 기기 사용자가 급격하게 증가하면서 가정이나 사무실 같은 실내 환경에서 사설 무선 AP(Access Point) 설치가 급증하고 있는 추세이다. 본 논문은 현재 무선 AP의 비효율적인 운영을 개선한 무선 AP의 전력 소비 절감 알고리즘을 제안한다. 제안한 알고리즘 동작은 STA(Station)의 무선 AP 접속 여부에 따라 구분되며, STA가 있을 경우는 STA로 전송할 데이터가 있을 때와 없을 때로 나뉜다. STA가 없는 경우, 수면 모드로 동작하여 불필요한 전력 소비를 최소화한다. 또한 추가적으로 STA가 접속을 하고 있는 경우에도 데이터를 수신하지 않을 경우에는 인증 및 결합이 유지된 상태로 수면 모드를 운영한다. STA로부터 데이터 요청이 있을 경우 STA의 거리와 전송률을 파악하여 STA의 전송률을 만족하는 최소의 송출 전력으로 패킷을 전송한다. 이때, STA와 최초로 스캔 과정을 하는 데 필요한 관리 프레임은 최대 송출 전력으로 전송한다. 본 논문에서 제시한 시나리오를 바탕으로 제안한 전력 소비 절감 알고리즘이 적용된 무선 AP에서의 전력 소비량은 기존 방안이 적용된 무선 AP와 비교하면 약 18%, 전력 소비 절감이 적용되지 않은 일반적인 무선 AP와 비교하면 약 35% 감소했다.

• 한국IT서비스학회지
• /
• 제19권3호
• /
• pp.89-100
• /
• 2020

The wireless power transmission market is growing at an average annual rate of 51.5% from $ 16.4 billion in 2015 to $ 131.1 billion in 2020. However, there are limitations to commercialization due to the development of standards and technologies. Thus, this study identified trends in standards and regulations by market and by country. The research collected and filtered a total of 69,488 worldwide wireless power transfer patents by June 2019 and extracted a total of 28,555 patents. Based on this, technology development status was analyzed and predicted. In this study, long-distance and short-range technology development with high technology development difficulty and low technology development ratio could lead to growth of the entire wireless charging market. It is analyzed that investment and policy preparation are necessary to secure source technology for long-distance / near technology development than China, Japan and Europe.

• 한국항행학회논문지
• /
• 제14권5호
• /
• pp.655-660
• /
• 2010

본 논문에서는 무선전력전송을 위한 정류회로의 RF-to-DC 변환효율 개선에 대해 연구하였다. 정류회로는 지역통과 필터, 다이오드 회로, 직류 통과필터로 구성되어 있는데, 이것들 모두가 변환 효율에 영향을 미친다. 시뮬레이션을 통해 이러한 부분들이 어떻게 변환효율에 영향을 주는지 조사를 하였고, 이러한 내용을 바탕으로 10dBm의 저전력에서 약 50%의 변환효율을 갖는 912MHz의 정류회로를 제작하여 특성을 측정하였다.

• 반도체디스플레이기술학회지
• /
• 제14권4호
• /
• pp.84-87
• /
• 2015

We have designed and fabricated two different RF-DC Converters called doubler for 5.8GHz Microwave Wireless Power Transmission. The doubler as RF-DC Converter makes the rectified voltage be doubled. We measured and compared voltages of the doublers with those of the previous full-wave rectifying RF-DC Converter. The doublers show rectified double voltages. However, the full-wave rectifying converter has a high efficiency due to the suppression of reflecting harmonics. The other fabricated doublers causes so many harmonics that they can't convert the low-power RF to the full DC. In this paper, we show that the different doublers doesn't double the rectifying voltages compared with those of the full-wave rectifying converter and give a reason about that.

• Journal of information and communication convergence engineering
• /
• 제13권1호
• /
• pp.7-14
• /
• 2015

In a multi-hop wireless network, connectivity is determined by the link that is established by the receiving signal strength computed by subtracting the path loss from the transmission power. Two path loss models are commonly used in research, namely two-ray ground and shadow fading, which determine the receiving signal strength and affect the link quality. Link quality is one of the key factors that affect network performance. In general, network performance improves with better link quality in a wireless network. In this study, we measure the network connectivity and performance in a shadow fading path loss model, and our observation shows that both are severely degraded in this path loss model. To improve network performance, we propose power control schemes utilizing link quality to identify the set of nodes required to adjust the transmission power in order to improve the network throughput in both homogeneous and heterogeneous multi-hop wireless networks. Numerical studies to evaluate the proposed schemes are presented and compared.