• Journal of electromagnetic engineering and science
• /
• 제15권2호
• /
• pp.104-110
• /
• 2015

As civil infrastructures continue to deteriorate, the demand for structural health monitoring (SHM) has increased. Despite its outstanding capability for damage identification, many conventional SHM techniques are restricted to huge structures because of their wired system for data and power transmission. Although wireless data transmission using radio-frequency techniques has emerged vis-$\grave{a}$-vis wireless sensors in SHM, the power supply issue is still unsolved. Normal batteries cannot support civil infrastructure for no longer than a few decades. In this study, we develop a magnetic resonance-based wireless power transmission system, and its performance is validated in three different mediums: air, unreinforced concrete, and reinforced concrete. The effect of concrete and steel rebars is analyzed.

• 조명전기설비학회논문지
• /
• 제27권10호
• /
• pp.15-20
• /
• 2013

In this paper, wireless power transfer system using the magnetic resonance was designed and applied to LED lighting for implementation of wireless lighting. This lighting was made by the converted DC driving type and the direct AC driving type. In the former, transferred AC power was rectified into DC and regulated to the specified voltage value, which leads to produce the loss at the rectifying and regulating circuit. In the latter, wireless-transferred AC power was directly applied to LED, which get rid of the loss derived from the additional circuit. For the efficiency-comparison between the former and the latter, the power at each stage was measured when the same optical output radiated from LED lighting part. The result revealed that the direct AC driving type had 18% higher efficiency than the DC driving type and confirmed that LED lighting using magnetic resonance wireless power transfer system can be efficient by direct AC power supply. And the direct AC driving type had the simple circuit structure and the simple LED lighting formation, so this can leads to various application.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.250-255
• /
• 2018

This paper presents a method for minimizing standby power consumption in wireless power transfer (WPT) system via magnetic resonance coupling (MRC) that operates at 6.78 MHz. The proposed circuit controls the required capacitance according to operational condition in order to reduce standby power consumption. Based on an impedance characteristic of the class-E power amplifier, operational principles of the proposed circuit are analyzed. Moreover, to verify the effectiveness of the proposed class-E power amplifier, an 8 W prototype for WPT system is implemented. The measured input power of the proposed class-E power amplifier at standby condition is reduced from 5.81 W to 3.53 W.

• 한국통신학회논문지
• /
• 제35권9B호
• /
• pp.1381-1389
• /
• 2010

동적인 전력 공급을 통해 에너지 효율을 높여줄 것으로 기대되는 스마트 그리드 기술은 최근 전기자동차 기술의 발달과 함께 차량의 배터리를 가정용 축전지로 활용하는 Vehicle-to-Grid(V2G) 기술에 대한 관심으로 이어지고 있다. 한편, 무선으로 전력을 공급해주는 비접촉 충전 방식은 직접 사용자가 전기 플러그를 콘센트에 꽂지 않고도 자기장 유도 기반으로 전력을 공급해줌으로써 사용자의 안전과 편의성을 보장해 줄 수 있다. 더욱이 이러한 무선 충전과 동시에 자기장을 활용한 통신 시스템이 구축되면 스마트 그리드의 동적 전력 공급의 영역을 이동하는 전기자동차까지 확장함으로써 보다 실용적인 V2G 기술을 제공할 수 있다. 본 논문에서는 이를 위한 자기장 통신 시스템을 제안한다. 자기장 통신 시스템은 데이터 통신 기능과 위치 인식 기능을 제공하며 비접촉식 충전인프라를 그대로 활용할 수 있는 장점이 있기 때문에 V2G 활용에 있어서 핵심적인 기술이라고 할 수 있다. 제안하는 시스템의 데이터 통신을 전력 공급 관련 정보를 패킷화하여 송수신하고, 위치 인식을 통해 차량과 충전인프라의 위치에 따른 충전 효율 및 통신 성능을 향상시킨다. 또한 테스트 베드를 개발하여 다양한 환경에서 성능 검증을 수행하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.743-746
• /
• 1998

In this paper, we developed an outdoor augmented reality system which has remote real scences acquisition ability. The real scenes acquisition system consists of image acquisition system, tracking system, wireless data transceiver and power supply. Tracking system that consists of Tans Vector and RT-20 measures a position and attitude of the CCD camera that attached at the remote control helicopter. Wireless data transceiver system is utilized for data transmission of remote system that of attitude, position information, andreal scenes data that acquired by the CCD camera. Maximum propelling power of remote control helicopter is 15Kg, so we used 7.2V li-ion cell as a power supply for system minimize. As the results of experiment, the developing system presented application possibility of remote information acquisition system such as construction simulation & estimation, broadcasting, tour guide.

• 한국컴퓨터정보학회논문지
• /
• 제23권12호
• /
• pp.179-184
• /
• 2018

In this paper, we have proposed the development of DC-DC converter for LRT power supply. First of all, we have studied converter technology, main functions and characteristics were determined. In also, the converter design was carried out to meet the system design conditions. Based on this design, converter simulation is performed to enable stable charging and discharging of the vehicle system. We have performed the Light-load test according to charge mode, discharge mode. As a result, the manufactured converter performance was verified through the load test, and it's stability was confirmed.

• 한국컴퓨터정보학회논문지
• /
• 제21권6호
• /
• pp.1-7
• /
• 2016

An uninterruptible power supply (UPS) allows small companies and domestic users to cope with power outages; but existing designs lack flexibility of control and require expensive battery maintenance, with a cost proportional to the outage compensation time. We combine a compact synchronous generator with a battery, with 10% of the capacity that would otherwise be required, to obtain a UPS with reduced maintenance costs for the same performance. Any UPS must respond immediately to a power loss, and our uninterruptible generator supply (UGS) is therefore built around real-time scheduling of its internal operations; this also makes it suitable for integration into the industrial gateway. The UGS is based on a real-time operating system, with an integrated wireless module providing connectivity to a web server, for monitoring and management, which can be performed remotely on a mobile device.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.569-575
• /
• 2014

A highly efficient class E power amplifier is demonstrated for application to wireless power transfer system. The amplifier is designed with an L-type matching at the output for harmonic rejection and output matching. The power loss and the effect of each component in the amplifier with the matching circuit are analyzed with the current ratio transmitted to the output load. Inductors with a quality factor of more than 120 are used in a dc feed and the matching circuit to improve transmission efficiency. The single-ended amplifier with 20 V supply voltage shows 7.7 W output power and 90.8% power added efficiency at 6.78 MHz. The wireless power transfer (WPT) system with the amplifier shows 5.4 W transmitted power and 82.3% overall efficiency. The analysis and measurements show that high-Q inductors are required for the amplifier design to realize highly efficient WPT system.

• 한국항행학회논문지
• /
• 제9권2호
• /
• pp.121-130
• /
• 2005

본 논문에서는 항공관제용 VHF대역 무선 송신기 설계 제작에 관하여 연구하였다. 연구된 무선 송신기의 기본적인 성능은 기존 상용화된 관제용 무선 송신기의 사양을 만족하도록 설계 제작하였으며, 전력 증폭부의 교체만으로 출력 전력 25 W와 50 W가 모두 가능하고 AM 변조로 음성을 전송하는 것을 기본으로 한다. 본 논문에서 연구된 항공관제용 무선 송신기는 크게 4개의 모듈 즉, 전원부, 제어부, 저출력 송신부, 전력 증폭부로 구성되어 있으며, 전력 증폭부를 장착하지 않으면 1 W급 송신기로 동작하게 설계되었다. 연구된 항공관제용 무선 송신기는 CNS/ATM의 기본 요소로 사용되기에 충분한 시스템이라고 판단된다.

• Journal of Information Technology Applications and Management
• /
• 제12권4호
• /
• pp.13-24
• /
• 2005

The sensor network is a key component of the ubiquitous computing system which is expected to be widely utilized in logistics control, environment/disaster control, medical/health-care services, digital home and other applications. Nodes in the sensor network are small-sized and exposed to adverse environments. They are demanded to perform their missions with very limited power supply only. Also the sensor network is composed of much more nodes than the wireless ad hoc networks are. In case that some nodes consume up their power capacity, the network topology should change, and rerouting/retransmission is necessitated. Communication protocols studied for conventional wireless networks or ad hoc networks are not suited for the sensor network resultantly. Schemes should be devised to control the efficient usage of node power in the sensor network. This paper proposes a medium access protocol to enhance the efficiency of energy consumption in the sensor network node. Its performance is analyzed by simulation.