• Journal of information and communication convergence engineering
• /
• v.8 no.1
• /
• pp.122-128
• /
• 2010

Efficient energy management is a very important issue in wireless sensor network since wireless sensor nodes are usually battery-powered. Recently, S-MAC protocol based on low duty-cycle has been proposed to reduce energy consumption. Even though research effort has been made to evaluate performance of S-MAC by conducting various simulations, however, some important simulation parameters are not well evaluated yet. In this paper, we identify the performance of S-MAC under different amount of streams and different patterns such as data rate and traffic. Through analyzing the simulation results, we discover weakness of S-MAC as well as analyze impact of amount of streams and packet pattern.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.4
• /
• pp.89-96
• /
• 2016

In this paper, we study mobile data collector (MDC) based data-gathering schemes in wireless sensor networks. In Such networks, MDCs are used to collect data from the environment and transfer them to the sink. The majority of existing data-gathering schemes suffer from high data-gathering latency because they use only a single MDC. Although some schemes use multiple MDCs, they focus on maximizing network lifetime rather than minimizing packet delay. In order to address the limitations of existing schemes, this paper focuses on minimizing packet delay for given number of MDCs and minimizing the number of MDCs for a given delay bound of packets. To achieve the minimum packet delay and minimum number of MDCs, two optimization problems are formulated, and traveling distance and traveling time of MDCs are estimated. The interior-point algorithm is used to obtain the optimal solution for each optimization problem. Numerical results and analysis are presented to validate the proposed method.

• Journal of Communications and Networks
• /
• v.13 no.2
• /
• pp.160-166
• /
• 2011

In u-healthcare services based on wireless body sensor networks, reliable connection is very important as many types of information, including vital signals, are transmitted through the networks. The transmit power requirements are very stringent in the case of in-body networks for implant communication. Furthermore, the wireless link in an in-body environment has a high degree of path loss (e.g., the path loss exponent is around 6.2 for deep tissue). Because of such inherently bad settings of the communication nodes, a multi-hop network topology is preferred in order to meet the transmit power requirements and to increase the battery lifetime of sensor nodes. This will ensure that the live body of a patient receiving the healthcare service has a reduced level of specific absorption ratio (SAR) when exposed to long-lasting radiation. We propose an efficientmethod for delivering delay-intolerant data packets over multiple hops. We consider forward error correction (FEC) in an erasure correction mode and develop a mathematical formulation for packet-level scheduling of delay-intolerant FEC packets over multiple hops. The proposed method can be used as a simple guideline for applications to setting up a topology for a medical body sensor network of each individual patient, which is connected to a remote server for u-healthcare service applications.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.9
• /
• pp.3094-3109
• /
• 2014

This paper proposes a load balanced reliable routing protocol called LBR (Load Balanced Reliable routing) in wireless networks. The LBR protocol transmits messages through a reliable path considering the balancing of the traffic load. Recently, the authors have proposed a multipath-based reliable routing protocol called MRFR, which is an appealing protocol for fault tolerant reliable data transmission. However, However, MRFR has no concern with the problem of load balancing, which results in increasing congestion and consuming high energy at some network nodes. As a result, the problem affects negatively the performance of the network. Taking account of load balancing as a route selection criteria can avoid routing through the congested nodes and allows to find better routes. In this paper, we extend MRFR by considering load balancing in the route discovery process of reliable communication. The simulation results showed that the proposed protocol outperforms AODV in terms of end-to-end delay, packet delivery radio, and average jitter. Compared to MRFR, the LBR protocol has the same packet delivery ratio, and obtains a better efficiency of load balancing.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.1
• /
• pp.227-247
• /
• 2018

For intermittently connected wireless sensor networks deployed in hash environments, sensor nodes may fail due to internal or external reasons at any time. In the process of data collection and recovery, we need to speed up as much as possible so that all the sensory data can be restored by accessing as few survivors as possible. In this paper a novel redundant data storage algorithm based on minimum spanning tree and quasi-randomized matrix-QRNCDS is proposed. QRNCDS disseminates k source data packets to n sensor nodes in the network (n>k) according to the minimum spanning tree traversal mechanism. Every node stores only one encoded data packet in its storage which is the XOR result of the received source data packets in accordance with the quasi-randomized matrix theory. The algorithm adopts the minimum spanning tree traversal rule to reduce the complexity of the traversal message of the source packets. In order to solve the problem that some source packets cannot be restored if the random matrix is not full column rank, the semi-randomized network coding method is used in QRNCDS. Each source node only needs to store its own source data packet, and the storage nodes choose to receive or not. In the decoding phase, Gaussian Elimination and Belief Propagation are combined to improve the probability and efficiency of data decoding. As a result, part of the source data can be recovered in the case of semi-random matrix without full column rank. The simulation results show that QRNCDS has lower energy consumption, higher data collection efficiency, higher decoding efficiency, smaller data storage redundancy and larger network fault tolerance.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.3
• /
• pp.138-144
• /
• 2007

Wireless Sensor Network(WSN) consists of a lot of light-weight sensor nodes with the capability of wireless communication. Studies have been done to improve stability and fault-tolerancy of WSN because the sensor nodes are basically vulnerable to the harsh environment. Specially, the time synchronization among sensor nodes becomes a challenging issue in WSN. All the local times should always keep the same with each other in the sensor field to perform data aggregation and energy-aware communication in WSN. In this paper, a new time synchronization technique is proposed to operate efficiently irrespective of the number of sensor nodes and the number of hops needed to cover all sensor nodes for synchronization. Simulation results show that the proposed technique has the lowest amount of packet traffic among the several time synchronization techniques.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.1
• /
• pp.127-132
• /
• 2013

In this paper, we design the physical layer of Guardian modem for wireless public networks. The physical layer is composed of a dual-band RF (Radio Frequency) transceiver and a baseband-processor with quasi-orthogonal codes. The 2.4/5GHz dual-band RF transceiver can overcome the communication difficulty of dense 2.4GHz band for wireless public environment. Also the quasi-orthogonal code can reduce the required ASIC (Application Specific Integrated Circuit) design area. Finally, we analyze the performance of the developed system in viewpoint of data rate, BER (Bit Error Rate), PER (Packet Error Rate). Moreover we verify the performance of the dual-band RF communication.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12B
• /
• pp.719-727
• /
• 2007

The Wireless Mesh Network technology is able to provide an infrastructure for isolated islands, in which it is difficult to install cables or wide area such as battlefield of armed forces. Therefore, Wireless Mesh Network is frequently used to satisfy needs for internet connection and active studies and research on them are in progress However, as a result of increase in number of hops under hop-by-hop communication environment has caused a significant decrease in throughput and an increase in delay. Considering the heavy traffic of real-time data, such as voice or moving pictures to adaptive WMN, in a military environment, it is restricted for remote units to have their Mesh Node to get real-time services. Such phenomenon might cause an issue in fairness. In order to resolve this issue, the Location-based Packet Scheduling Scheme, which can provide an fair QoS to each mesh node that is connected to each echelon's AP and operates based on WRR method that gives a priority to emergency message and control packet. The performance of this scheme is validated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.7
• /
• pp.372-379
• /
• 2014

When a hand-held device with limited battery transmits and receives data using short-range wireless communication systems, such as WLAN(Wireless Local Area Network) or high speed WPAN(Wireless Personal Area Network), instead of mobile communication systems, the device is able to reduce the power consumption due to the reduced transmission distance. However, if there are many WLAN or high speed WPAN systems around the device, non-negligible power may be consumed by receiving and decoding the packets which have nothing to do with the device. In this paper, we propose a scheme reducing the power consumption by including physical-layer ID in WLAN or WPAN packets and avoiding unnecessary packet receptions. Also, we describe a method to determine the optimum number of physical-layer IDs.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.197-203
• /
• 2011

Ad-hoc networks do not rely on a preexisting infrastructure such as Access Points(AP) in wireless network infrastructure. Instead each node participates in routing by forwarding data for other nodes. It makes required broadcasting to transmit packets to the whole network. In that part, each node tries to transmit data without any information about the other nodes. Therefore it causes duplication of transmission and waste of power. This paper presents adaptive probabilistic broadcasting schemes based on packet reception counts to alleviate the broadcast storm problem for wireless ad hoc networks. In this algorithm, each node calculates efficiency broadcast probability. Simulation results for the proposed flood algorithm are also presented.