• 전기학회논문지P
• /
• 제64권4호
• /
• pp.207-211
• /
• 2015

In this paper, we proposed a broadband planar Yagi-Uda dipole antenna with dual tapered balance and unblance (balun) by CPW-fed to CPS. This antenna consisted of driver, three directors, dual tapered balun and CPS-fed to CPS. The fed structure of CPW-fed to CPS had a benefit points much simpler than other planar Yagi-Uda antennas and provided design more flexibility in arranging the reflector. The proposed antenna is introduced dual tapered balun to improve the impedance matching. It balun is inserted between the CPW-ground and the CPS. The proposed antenna is exhibited the bandwidth of 4.78 GHz (1.94~6.72 GHz) (S11 < -10 dB) and the gain of 4.9~7.2 dBi within that bandwidth. This antenna will applicate wireless communication.

• 전기학회논문지P
• /
• 제64권3호
• /
• pp.116-120
• /
• 2015

In this paper, a step type driver dipole antenna with a tapered balance and unbalance (balun) by a coplanar waveguide (CPW) to coplanar strip (CPS) transition is proposed. The proposed antenna consisted of step type driver, a CPW to CPS transition and tapered balun. The proposed antenna is realized the multi and wide resonate frequency band to introduce the step type driver and tapered balun. The step type driver is acted as a director too. This antenna could be more easily designed than the conventional printed quasi-Yagi dipole antenna. The operating frequency bandwidth was 650 [MHz] (2.65~3.3 GHz), 900 [MHz] (4.7~5.6 GHz) under a return-loss criterion of less than 10 dB. The measurements of the proposed antenna exhibited good results in the wideband operating frequency and radiation pattern. The proposed antenna can support wireless communications applications.

• 전기학회논문지P
• /
• 제58권4호
• /
• pp.432-436
• /
• 2009

This paper is described that advanced study on network design of remote diagnosis system for power facilities of electric railway. In the field, it is very difficult for worker to diagnosis power facilities including catenary because workers should be maintenance on AC power supply. Therefore, to properly design on remote diagnosis system, we have searched the inside and outside of the country-related technology trends. Also we confirmed that required technologies to design interface technology required for the development of sensor devices and the USN network was designed in accordance with required skills. Throughout variety of requirements, we have development iRFS based ZA sensors and iRFM to receive data of sensor. Also CC2420 is applied as single-chip which used 2.4GHz IEEE802.15.4 compliant RF tranciver designed for low-power and low-voltage wireless applications for ZigBee communication.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권5호
• /
• pp.248-253
• /
• 2006

The purpose of this study is to develop a portable gait-event detection system which is necessary for the cycle-to-cycle FES(functional electrical stimulation) control of locomotion. To make the system portable, we made following modifications in the gait signal measurement system. That is, 1) to make the system wireless using Bluetooth communication, 2) to make the system small-sized and battery-powered by using low power consumption ${\mu}$ P(ATmega8535L). The gait-events were analyzed in off-line at the main computer using ANN(Artificial Neural Network). The Proposed system showed no mis-detection of the gait-events of normal subject and hemiplegia subjects. The performance of the system was better than the previous wired-system.

• 전자통신동향분석
• /
• 제19권2호통권86호
• /
• pp.127-137
• /
• 2004

본 논문에서는 2003년 9월, 설문조사를 통해 조사한 국내 무선랜 운영현황의 주요결과를 제시하고 있으며, 무선랜 AP의 비컨 신호의 복조를 통하여 일반 무선랜 이용자에게 운영 채널번호, 수신 신호세기, WEP 설정유무 등의 주변 무선랜 AP 정보를 제공하는 응용 소프트웨어(이하 ‘무선랜 가이더’라 함)를 소개하고 있다. 그리고 서울 도심지역에서 무선랜의 운영현황을 무선랜 가이더를 이용하여 측정하고, 그 결과를 바탕으로 도심지역의 무선랜 운영실태를 조사하였다. 특히, 주변 무선랜 AP의 운영 파악에 유용한 무선랜 가이더는 정보통신부 및 초고속 무선랜 포럼의 홈페이지를 통하여 무료로 배포될 예정으로 있다.

• 전기학회논문지P
• /
• 제57권3호
• /
• pp.255-259
• /
• 2008

In this paper, a current-mode integrator for low-voltage, low-power analog integrated circuits is presented. Using the proposed current-mode integrator, the baseband analog filter is designed for WCDMA wireless communication. To verify the proposed current-mode integrator circuit, Hspice simulation using 1.8V TSMC $0.18{\mu}m$ CMOS parameter is performed and achieved 44.9dB gain, 15.7MHz unity gain frequency. The described 3rd-order current-mode baseband analog filter is composed of the proposed current-mode integrator, and SFG(Signal Flow Graph) method is used to realize the baseband filter. The simulated results show 2.12MHz cutoff frequency which is suitable for WCDMA baseband block.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2006년도 가을 학술발표논문집 Vol.33 No.2 (D)
• /
• pp.254-258
• /
• 2006

IEEE 802.11 이 표준화 되면서 성능 분석에 대한 연구가 많이 활발히 진행되고 있다. 가장 대표적인 802.11 DCF 분석모델로 비앙키 모델이 있는데, 이는 채널에 에러가 없는 상황을 가정하여 분석하고 있다. 비앙키 모델에서는 모든 노드는 전송 시도를 했을 때 시간에 독립적인 확률p 의 전송 실패율을 갖게 된다는 디커플링 가정을 기반으로 분석하였으며, 대부분의 확장논문들 역시 이 가정을 바탕으로 하고 있다. 본 논문에서는 디커플링 가정을 사용하지 않는 방법으로 채널에러가 존재하는 IEEE 802.11 DCF의 성능을 분석하였으며 분석 결과를 NS2 를 이용한 시뮬레이션과의 비교를 통해 분석의 정확성을 검증하였다.

• 전자공학회논문지B
• /
• 제31B권8호
• /
• pp.172-180
• /
• 1994

Implantable biotelemetry systems are indispensable tools not only in animal research but also in clinical medicine as such systems enable the acquisition of otherwise unavailable physiological data. We present the manufacture of CMOS IC and its system for implantable multichannel biotelemeter system. The internal circuits of this system are designed not only to achieve as multiple functions and low power dissipation as possible but also to enable continuous measurement of physiological data. Its main functions are to enable continuous measurement of physiological data and to accomplish on-off power swiching of an implantable battery by receiving appropriate commanc signals from an external circuit. The implantable circuits of this system are designed and fabricated on a single silicon chip using $1.5\mu$m n-well CMOS process technology. The total power dissipation of implantable circuits for a continuous operation was 6.7mW and for a stand-by operation was 15.2$\mu$ W. This system used together with approriate sensors is expected to contribute to clinical medicine telemetry system of measuring and wireless transmitting such significant physiological parameters as pressure pH and temperature.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.387-388
• /
• 2007

IEEE 802.15.4a의 UWB(ultra-wide band) 방식에서 PHY(physical layer) 시스템에 사용되는 FEC(forward error correction)는 RS(Reed-Solomon) 조직적(systematic) 블록 부호와 1/2의 부호율을 가진 조직적 길쌈 부호의 연접 형태로 이루어져 있다.[1] UWB 신호를 이용한 시스템은 연속적이지 않은 임펄스(impulse) 기반의 신호를 사용하기 때문에 정밀도 면에서 뛰어난 장점을 가진다. 본 논문에서는 IEEE P802.15.4a 표준에 명시되어 있는 FEC를 구현하여 AWG(adaptive white gaussian noise) 채널에서의 SNR(signal to noise ratio)에 따른 BER(bit error rate)을 구함으로써 성능을 분석하였다. 실험에서의 정확한 결과를 얻기 위해 15.4a의 UWB에서의 변조 방식에 따라 신호를 변조한 후 잡음을 삽입하여 결과를 도출하였다.

• 전기학회논문지P
• /
• 제56권1호
• /
• pp.28-36
• /
• 2007

Sensor networks are usually composed of tens or thousands of tiny devices with limited resources. Because of their limited resources, many researchers have studied on the energy management in the WSNs(Wireless Sensor Networks), especially taking into account communications efficiency. For effective data transmission and sensor fault detection in sensor network environment, a new remote monitoring system based on PCA(Principle Component Analysis) and AANN(Auto Associative Neural Network) is proposed. PCA and AANN have emerged as a useful tool for data compression and identification of abnormal data. Proposed system can be effectively applied to sensor network working in LEA2C(Low Energy Adaptive Connectionist Clustering) routing algorithms. To verify its applicability, some simulation studies on the data obtained from real WSNs are executed.