• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.89-92
• /
• 2000

A wire communication module for PLC controller was developed. This system consists of RF module interface part, RS232 serial communication control part, LED display part and control S/W with GUI interface. RF communication frequency is controlled by PLL controlling and communication rate is also controlled as 1200 and 4800 bps. Communication and control status are displayed on LED. As a S/W part, graphic user interface on Window 95 O.S. was developed. To show the validity of the developed system, severial communication and control of PLC system were experemented.

• The KIPS Transactions:PartC
• /
• v.18C no.2
• /
• pp.111-118
• /
• 2011

Recently, with the popularity of smartphones, an interest in multi-networking service through wireless multi-interface of a mobile node is increased. Also, wireless networking technology for using wireless multi-interface has been studied. As the related work, in the IETF Netext WG, the extension of PMIPv6 protocol for multi-interface support is being discussed. Existing PMIPv6 protocol includes the functions for simultaneous access over multi-interfaces of a mobile node and inter-technology handover between multi-interfaces of the mobile node. However, in case of the existing protocol, the problem occurs when inter-technology handover is performed after simultaneous access on the PMIPv6 domain, this problem is the discontinuous of simultaneous connections. Therefore, the PMIPv6 Protocol cannot support flow based multi-homing service. In this paper, as a way to solve the problem, Hybrid Home Network Prefix scheme is proposed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.702-704
• /
• 2010

Wireless LAN(Local Area Network) environment to support QoS in IEEE802.11 Working Group has standardized on the IEEE 802.11e. IEEE 802.11e EDCA channel access of the high priority traffic as by raising the probability of a chance to support QoS. This is a high priority traffic than low priority traffic, channel access is not necessarily the first. Therefore, as all traffic channels, if you have the same routing path, lower priority traffic on the performance of high priority traffic, sustainable impact. As a result, EDCA, such as voice or video to guarantee QoS for multimedia applications, follow the crowd. In this paper, to solve these problems by using Multi-Interface Multi-Path Routing Algorithm is proposed. Interface for each use in IEEE 802.11e EDCA Access Category much differently by each of the Routing Path for high priority traffic and guarantee QoS.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.3
• /
• pp.57-70
• /
• 2008

This paper introduces a new paradigm of physical layer security through channel coding for wireless networks. The well known spread spectrum based physical layer security in wireless network is applicable when code division multiple access (CDMA) is used as wireless air link interface. In our proposal, we incorporate the proposed security protocol within channel coding as channel coding is an essential part of all kind of wireless communications. Channel coding has a built-in security in the sense of encoding and decoding algorithm. Decoding of a particular codeword is possible only when the encoding procedure is exactly known. This point is the key of our proposed security protocol. The common parameter that required for both encoder and decoder is generally a generator matrix. We proposed a random selection of generators according to a security key to ensure the secrecy of the networks against unauthorized access. Therefore, the conventional channel coding technique is used as a security controller of the network along with its error correcting purpose.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.762-771
• /
• 2005

In this paper, an efficient Adaptive quality-of-service (QoS) traffic control scheme with priority scheduling is proposed for the multimedia traffic transmission over wireless access networks. The objective of the proposed adaptive QoS control (AQC) scheme is to realize end-to-end QoS, to be scalable without the excess signaling process, and to adapt dynamically to the network traffic state according to traffic flow characteristics. Here, the reservation scheme can be used over the wireless access network in order to get the per-flow guarantees necessary for implementation of some kinds of multimedia applications. The AQC model is based on both differentiated service model with different lier hop behaviors and priority scheduling one. It consists of several various routers, access points, and bandwidth broker and adopts the IEEE 802.1 le wireless radio technique for wireless access interface. The AQC scheme includes queue management and packet scheduler to transmit class-based packets with different per hop behaviors (PHBs). Simulation results demonstrate effectiveness of the proposed AQC scheme.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.4
• /
• pp.349-355
• /
• 2008

In this paper, a wireless remote monitoring system for leakage current of distribution board is developed. In the developed system, signals of the leakage current of distribution board are transmitted to a monitoring system using wireless communication. The developed system is consisted of a comparative module, control module, a wireless communication module, and hand held terminal. The developed system has any facilities which can check a leakage current with real time, send to the user this fact using a wireless remote interface method. And also developed system can take precaution for an accident by leakage current.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.37-48
• /
• 2014

Wireless mesh networks have emerged as a key technology in environment that needs wireless multi-hop communication without infrastructure and IEEE 802.11s mesh network standard have currently been established. One of big differences between this standard and the legacy IEEE 802.11 is that MCCA MAC is included to support QoS. MCCA supports bandwidth reservations between neighbors, so it can satisfy the QoS of bandwidth guarantee. However, MCCA has dis-advantages as follow; 1) it can not guarantee end-to-end bandwidth, 2) in multi-interface multi-channel wireless environments, the IEEE 802.11s does not provide a bandwidth reservation protocol and a wireless channel assignment etc. In this paper, we have proposed MIMC R-HWMP, which expands R-HWMP that was proposed in our previous work[3], to support multi-interface multi-channel. By simulation, we showed end-to-end bandwidth guarantee and the increase in the available bandwidth in multi-interface multi-channel wireless mesh networks.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.7
• /
• pp.720-729
• /
• 2011

The demand for wireless technology in home automation systems has recently been increasing due to several advantages such as installation cost reduction, easy placement, easy extension, aesthetic benefits, and mobile device connectivity. Among the many wireless technologies, ZigBee is one of the most useful for home automation; a wireless home networking system can be configured using ZigBee alone. Compatibility with conventional home networking systems that are based on wired media, however, is not supported. KNX is a mature protocol for wired media that is recognized as an international standard. This paper proposes a KNX-ZigBee gateway to interface between KNX and ZigBee systems and thereby enable integration of wired and wireless home automation systems.

• Journal of information and communication convergence engineering
• /
• v.7 no.3
• /
• pp.258-262
• /
• 2009

A Practical application of environmental monitoring system based on wireless sensor node network with the core of embedded system STR711FR2 microprocessor is presented in the paper. The adaptable and classifiable wireless sensor node network is used to achieve the data acquisition and multi-hop wireless communication of parameters of the monitoring base station environment including repeaters. The structure of the system is proposed and the hardware architecture of the system is designed, and the system operating procedures is proposed. As a result of field test, designed hardware platform operated with 50kbps bit rate and 5MHz channel spacing at 2040Hz. The wireless monitoring system can be managed and swiftly retreated without support of base station environmental monitoring.

• Journal of the Korean Society for Library and Information Science
• /
• v.34 no.3
• /
• pp.25-36
• /
• 2000

This paper starts by describing the wireless internet service as a new function in the internet age. It then discusses the usefulness of wireless internet for improveing library information service. Recently the use of wireless internet service, as a major internet service in the future, has been rapidly increased because it can be provided various type of information using individual's cellulasphone without the time and space restrictions. Therefore, wireless internet service will be of great use for decentralization and rapidness of library function as well as improvement of user service by providing various interface of information retrieval.