• The KIPS Transactions:PartC
• /
• v.15C no.4
• /
• pp.297-302
• /
• 2008

In case of display a lot of information from mobile devices, those systems are being developed that display the information from mobile devices on remote devices such as TV using the mobile devices as remote controllers because it is difficult to display a lot of information on mobile devices due to their limited bandwidth and small screen sizes. A lot of cost is required to design and develop interfaces for these systems corresponding to each of remote display devices. In this paper, a mobile environment based remote display system for displays at real times is proposed for continuous monitoring of status data for unique 'Mote IDs'. Also, remote data are collected and monitored through sensor network devices such as ZigbeX by applying status perception based remote displays at real times through processing ubiquitous computing environment data, and remote display applications at real times are implemented through PDA wireless mobiles. The system proposed in this paper consists of a PDA for remote display and control, mote embedded applications programming for data collections and radio frequency, server modules to analyze and process collected data and virtual prototyping for monitoring and controls by virtual machines. The result of the implementations indicates that this system not only provides a good mobility from a human oriented viewpoint and a good usability of accesses to information but also transmits data efficiently.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.337-341
• /
• 2008

This paper presents a vibrotactile space mouse which use pin-type vibrotactile display modules and a gyroscope chip. This mouse is a new interface device which is not only an input device as an ordinary space mouse but also a tactile output device. It consists of a space mouse which use gyroscope chip and vibrotactile display modules which have been developed in our own laboratory. Lately, by development of vibrotactile display modules which have small size and consume low power, vibrotactile displays are available in small sized embedded systems such as wireless mouses or mobile devices. Also, development of new sensors like miniature size gyroscope by MEMS technology enables manufacturing of a small space mouse which can be used in the air not in a plane. The vibrotactile space mouse proposed in this paper recognizes motion of a hand using the gyroscope chip and transmits the data to PC through Bluetooth. PC application receives the data and moves pointer. Also, 2 by 3 arrays of pin-type vibrotactile actuators are mounted on the front side of the mouse where fingers of a user's hand contact, and those actuators could be used to represent various information such as gray-scale of an image or Braille patterns for visually impared persons.

• Journal of Information Processing Systems
• /
• v.2 no.2
• /
• pp.76-81
• /
• 2006

A PDA is used mainly for downloading data from a stationary server such as a desktop PC in an infrastructure network based on wireless LAN. Thus, the overall performance depends heavily on the performance of such downloading with PDA. Unfortunately, for a PDA the time taken to receive data from a PC is longer than the time taken to send it by 53%. Thus, we measured and analyzed all possible factors that could cause the receiving time of a PDA to be delayed with a test bed system. There are crucial factors: the TCP window size, file access time of a PDA, and the inter-packet delay that affects the receiving time of a PDA. The window size of a PDA during the downstream is reduced dramatically to 686 bytes from 32,581 bytes. In addition, because flash memory is embedded into a PDA, writing data into the flash memory takes twice as long as reading the data from it. To alleviate these, we propose three distinct remedies: First, in order to keep the window size at a sender constant, both the size of a socket send buffer for a desktop PC and the size of a socket receive buffer for a PDA should be increased. Second, to shorten its internal file access time, the size of an application buffer implemented in an application should be doubled. Finally, the inter-packet delay of a PDA and a desktop PC at the application layer should be adjusted asymmetrically to lower the traffic bottleneck between these heterogeneous terminals.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.209-214
• /
• 2014

IMS(IP Multi-Media Subsystem) is in the limelight as the Integrated wire and wireless Systems because of a sudden increase of smart mobile devices and growth of multimedia additional services such as IPTV. The structure of IMS is designed as a session control layer to provide various multimedia summative service using SIP based on IP communication network in order to carry out set-up, change and release by NGN of course, the existing voice services. But now It is broadly substituting in the IPTV, wire phone company and it is substituted in internet platform base on the soft-switch in currently. Especially, in currently, 4G LTE in a mobile communication company is rapidly growing in market. Therefore, in this study, we had designed and developed to the main prosser that can admit to 1000 user over and SIP gateway which can link the IMS Core that can link SIP Device which adopt the standard protocol on the SIP and to provide variable multimedia services.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.137-147
• /
• 2008

Recently, Power and thermal management are becoming major concerns in computer system design. The energy efficiency is an important attribute of the mobile and embedded systems. Today's powerful mobile processors needs more energy and longer battery life. Many research has been focused to reduce energy consumption for the mobile processors.In this paper, performance monitoring system for the Power-management techniques is implemented for Intel's XScale microarchitecture-based Marvell PXA320 processor on Windows CE platform. It also provides software interface for changing DVFS configuration. Performance and power consumption are measured for benchmark programs through performance counter value and voltage/current measurements on LabVIEW platform. By using the developed monitoring system, it is possible for dynamic power management to track processor's workload and to determine the actual power consumption.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2C
• /
• pp.238-245
• /
• 2010

For orthogonal frequency division multiplexing (OFDM) systems sharing the spectrum with narrow band primary devices, a fractional bandwidth (FBW) mode has been proposed recently to reduce the interference to the primary users. The FBW mode divides the total OFDM bandwidth into subbands and activates (or deactivates) a subset of the subbands according to the result of spectrum sensing. In this paper, we analyze the detection error probability of FBW mode information which is delivered by the sequence embedded in the preamble and evaluate the performance in wireless regional area network environments. The results show that the detection probability derived analytically estimates the actual value from simulation adequately and that a low detection error probability less than $10^{-3}$ is obtained at a low signal-to-noise power ratio.

• Journal of Biosystems Engineering
• /
• v.40 no.3
• /
• pp.165-177
• /
• 2015

Purpose: Accurate monitoring of soil strength is a key technology applicable to various precision agricultural practices. Soil strength has been traditionally measured using a cone penetrometer, which is time-consuming and expensive, making it difficult to obtain the spatial data required for precision agriculture. To improve the current, inefficient method of measuring soil strength, our objective was to develop and evaluate an in-situ system that could measure horizontal soil strength in real-time, while moving across a soil bin. Methods: Multiple cone-shape penetrometers were horizontally assembled at the front of a vertical plow blade at intervals of 5 cm. Each penetrometer was directly connected to a load cell, which measured loads of 0-2.54 kN. In order to process the digital signals from every individual transducer concurrently, a microcontroller was embedded into the measurement system. Wireless data communication was used between a data storage device and this real-time horizontal soil strength (RHSS) measurement system travelling at 0.5 m/s through an indoor experimental soil bin. The horizontal soil strength index (HSSI) measured by the developed system was compared with the cone index (CI) measured by a traditional cone penetrometer. Results: The coefficient of determination between the CI and the HSSI at depths of 5 cm and 10 cm ($r^2=0.67$ and 0.88, respectively) were relatively less than those measured below 20 cm ($r^2{\geq}0.93$). Additionally, the measured HSSIs were typically greater than the CIs for a given numbers of compactor operations. For an all-depth regression, the coefficient of determination was 0.94, with a RMSE of 0.23. Conclusions: A HSSI measurement system was evaluated in comparison with the conventional soil strength measurement system, CI. Further study is needed, in the form of field tests, on this real-time measurement and control system, which would be applied to precision agriculture.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.2
• /
• pp.1005-1018
• /
• 2017

This paper proposes an App Visualization (AppV) based on IoT Self-diagnosis Micro Control Unit (ISMCU) for accident prevention. It collects a current status of a vehicle through a sensor, visualizes it on a smart phone and prevents vehicles from accident. The AppV consists of 5 components. First, a Sensor Layer (SL) judges noxious gas from a current vehicle and a driver's driving habit by collecting data from various sensors such as an Accelerator Position Sensor, an O2 sensor, an Oil Pressure Sensor, etc. and computing the concentration of the CO collected by a semiconductor gas sensor. Second, a Wireless Sensor Communication Layer (WSCL) supports Zigbee, Wi-Fi, and Bluetooth protocol so that it may transfer the sensor data collected in the SL to ISMCU and the data in the ISMCU to a Mobile. Third, an ISMCU integrates the transferred sensor information and transfers the integrated result to a Mobile. Fourth, a Mobile App Block Programming Tool (MABPT) is an independent App generation tool that changes to visual data just the vehicle information which drivers want from a smart phone. Fifth, an Embedded Module (EM) records the data collected through a Smart Phone real time in a Cloud Server. Therefore, because the AppV checks a vehicle' fault and bad driving habits that are not known from sensors and performs self-diagnosis through a mobile, it can reduce time and cost spending on accidents caused by a vehicle's fault and noxious gas emitted to the outside.

• The Journal of the Korea Contents Association
• /
• v.7 no.11
• /
• pp.1-8
• /
• 2007

The Sensor Network enables many distributed systems to be unmanned and automated by using of diverse sensors as well as wireless communication technologies. One of major enabling technologies for the sensor network is the USN middleware which plays the role of collecting and analyzing of measurements of sensors and controlling of the environments. The paper deals with the fungus cultivating environment based on Sensor Networks. Especially, we focus on the design of USN middleware for the embedded system, and explain how to design software architecture in terms of architectural patterns. In this design process, the improvement of methodology for pattern-oriented architecture design is proposed and the quality attributes for the architecture design is newly classified and suggested for the reference of software architecture design.

• Smart Structures and Systems
• /
• v.9 no.2
• /
• pp.145-164
• /
• 2012

In this paper, solar-powered, multi-scale, vibration-impedance sensor node on Imote2 platform is presented for hybrid structural health monitoring (SHM) in cable-stayed bridge. In order to achieve the objective, the following approaches are proposed. Firstly, vibration- and impedance-based hybrid SHM methods are briefly described. Secondly, the multi-scale vibration and impedance sensor node on Imote2-platform is presented on the design of hardware components and embedded software for vibration- and impedance-based SHM. In this approach, a solar-powered energy harvesting is implemented for autonomous operation of the smart sensor nodes. Finally, the feasibility and practicality of the smart sensor-based SHM system is evaluated on a full-scale cable-stayed bridge, Hwamyung Bridge in Korea. Successful level of wireless communication and solar-power supply for smart sensor nodes are verified. Also, vibration and impedance responses measured from the target bridge which experiences various weather conditions are examined for the robust long-term monitoring capability of the smart sensor system.