• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.503-508
• /
• 2019

In recent years, among the IoT products that are used in various ways in everyday life, motorized products are increasing. This study aims to develop a microcontroller unit that can easily control multiple motors and develop an application that makes use of this microcontroller unit. The basis of the hardware developed by the research was the Arduino board, and to it, the Bluetooth module, Zigbee module, and a motor driver were connected. To control the device, an application was designed. The final microcontroller unit and its application may be applied to electric curtains, electric blinds, robots, and other various IoT products. Further research will lead to hardware development that can control various types of motors other than stepping motors.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.6 s.360
• /
• pp.1-8
• /
• 2007

In wireless sensor network which uses limited battery, power consumption is very important factor for the survivality of the system. By using low-power communication to reduce power consumption, error rate is increased in typical conditions. This paper analyzes power consumption of specific error control coding (ECC) implementations. With identical link quality, ECC provides coding gain which save the power for transmission at the cost of computing power. In sensor node, transmit power is higher than computing power of Micro Controller Unit (MCU). In this paper, Viterbi algerian is applied to the low-transmit-power sensor networks in terms of network power consumption. Practically, Viterbi algorithm presents 20% of reduction of re-transmission in compared with Auto Repeat Request (ARQ) system. Furthermore, it is observed that network power consumption is decreased by almost 18%.

• KSCI Review
• /
• v.14 no.2
• /
• pp.165-174
• /
• 2006

This paper is a matter of remote control apparatus and display remote control system comprising the same. The remote controller is a wireless remote pointing device that is included a function of mouse and a function of remote controller for VOD etc. It is assembled a sending signal part to communicate with display device, a image sensor part to capture a seen of front view and a main body. Also, it includes a control part that analyzes the captured image, calculates a relative moving factor that main body is moved by user, and then controls the mouse cursor on the display device. The remote control apparatus is able to capture a seen of front view, to analyze the captured image, and to move a mouse cursor point on the display device as much as it calculated relative moving factor. Therefor it brings down the cost of production by a product design that is increased user satisfaction. And it, using the patent and the new product design, will make an epoch in development of the remote control system for Ubiquitous broadcasting industry.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.99-106
• /
• 2017

Audible Pedestrian Signal(APS) is an additional equipment to provide information about pedestrian signals in non-visual formats such as audible tones and verbal messages. It can provide information to pedestrians about the location and directions of a crosswalk, and the traffic signal status. In general, a pedestrian who is visually impaired uses a 358.5MHz wireless remote controller to activate the APS and crosses at the crosswalk with the help of the APS. The existing APS can only receive an activation message from the remote controller. Therefore, the APS has an issue, especially at intersections, that all APSs within the communication range of the remote controller are activated simultaneously. It makes to confuse the visual impaired pedestrians. In this paper, we propose a BLE-enabled APS that can enable two-way communication via Bluetooth with a smartphone. The proposed system solves the problem and provides them with additional information, so that visually impaired pedestrians can cross at the crosswalk more conveniently.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.2 s.46
• /
• pp.161-170
• /
• 2007

This paper is a matter of remote control apparatus and display remote control system comprising the same. The remote controller is a wireless remote pointing device that is included a function of mouse and a function of remote controller for VOD etc. It is assembled a sending signal part to communicate with display device, a image sensor part to capture a scene of front view and a main body. Also, it includes a control part that analyzes the captured image, calculates a relative moving factor that main body is moved by user, and then controls the mouse cursor on the display device. The remote control apparatus is able to capture a seen of front view, to analyze the captured image, and to move a mouse cursor point on the display device as much as it calculated relative moving factor. Therefor it brings don the cost of production by a product desist that is increased user satisfaction. And it, using the patent and the new product desist, will make an epoch in development of the remote control system for Ubiquitous broadcasting industry.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.6
• /
• pp.253-257
• /
• 2011

This study was carried out to solve problems such as radio frequency band depletion, confusion risk, and security loss in existing visible wireless communication systems, and to determine the applicability of next-generation networks. A light-emitting diode (LED) light communication system was implemented with a controlling switching light module using the ATmega16 micro-controller. To solve the existing modulation effect and disturbance in visible light communication, an integrated interface was evaluated with a driving light module and analyzes its reception property. A transmitter/receiver using the ATmel's micro-controller, high-intensity white LED-6 modules, and infrared sensor KSM60WLM and visible sensor TSL250RD were designed. An experiment from the initial value of distance to 2.5 m showed 0.46 V of the voltage loss, and if in long distance, external light interference occurred and light intensity was lost by external impact and thus data had to be modified or reset repeatedly. Additionally, when we used 6 modules through the remote controller's lighting dimming, data could be transmitted up to 1.76 m without any errors during the day and up to 2.29 m at night with around 2~3% communication error. If a special optical filter can reduce as much external light as possible in the integrated interface, the LED for lighting communication systems may be applied in next generation networks.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.606-608
• /
• 2021

Humans and various devices are interconnected using the Internet of Things and are used in various ways. In this study, a synchronization control system with remote locations was constructed using ICT, and a signal system for pedestrians was implemented using the system. PLC circuits were used to implement controllers, through which wireless control signal transmission and reception, LED lamp emission control, and power control were performed. It was confirmed that signal synchronization from the main controller to the remote sub-controller was possible by establishing a controller and pedestrian traffic light system, and lamp signal synchronization of the pedestrian traffic light system installed on both sides of the road was implemented. As a result, it was confirmed that 1:1 remote control or 1:N remote group control was possible, and this result can be used in various fields.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1208-1210
• /
• 2002

This paper proposes a new position detection method for train speed control using the PDOA(Phase Difference of Arrival). This method aims to apply to AGT(Automated Guide way Transit) systems, operated with driverless. So it is absolutely required to range, calculate and decide a train position precisely. This system consists of VRS (Vehicle Radio Set) and WRS(Wayside Radio Set). The VRS transmits a wireless signal to the WRS, the controller calculate a straight line with the PDOA. Next step calculate an exact position using track DB. This paper includes the concept, configuration, analysis and results of this method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2155-2158
• /
• 2003

A term of home automation that was in fashion only a few years ago has not been used any more. Nowadays, We have been used a term of home network or digital home than home automation much. While internet infra is diffused at home, data network corp., communication corp., electric appliance corp. and home automation control system corp. which we did not mind each other particularly constructed consortium, and they have designs on home network market. Also, cellular phone's growth tried home networking by using not only wired internet but also broadband wireless communication. Regardless, many solutions are coming out it is few to be applied to real life because the standard is not determined with the protocol each other. Therefore, we developed home network system using USB(Universal Serial Bus) that has the possibility most in home networking standard. The mobile USB home control system is excellent at expansibility and portability. Also we can complete low cost and stable system using an embedded system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2063-2065
• /
• 2003

The control rod drive mechanisms in a reactor head are arranged too narrow for a human worker to approach. Moreover, the working environment is in high radiation area. In order to inspect defections in the surfaces of the reactor head and welding parts, a visual inspection device that can approach such a narrow and high radiation area is required. This paper introduces a tele-operated mobile robot for visual inspection of a reactor head, which has pan/tilt camera, fixed rear camera, ultrasonic collision detection system, and so on. Moreover, the host controller and digital video logging system are developed and integrated control software is also developed. The robot is operated by a wireless control, which gives flexibility for the inspection.