• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.187-189
• /
• 2020

본 논문은 AGV(Automated Guided Vehicle)용 규격에 적합한 자기 유도 방식의 무선 전력 전송 패드 설계 디자인을 제안한다. 제한된 공간에서의 최적설계를 위해 코일의 직경, 턴수, 페라이트의 배치에 따른 관련 파라미터의 상관관계를 분석하며 유한요소해석 시뮬레이션을 통해 대해 비교 및 선정한다. 제안한 설계 결과는 3kW급 하드웨어를 제작하여 검증하며, 발열 및 효율을 확인한다.

• International Journal of Computer Science & Network Security
• /
• v.21 no.11
• /
• pp.338-344
• /
• 2021

The recently continuous enhancement and development in the biomedical side for the betterment of human life. The Wireless Body Area Networks is a significant tool for the current researcher to design and transfer data with greater data rates among the sensors and sensor nodes for biomedical applications. The core area for research in WBANs is power efficiency, battery-driven devices for health and medical, the Charging limitation is a major and serious problem for the WBANs.this research work is proposed to find out the optimal solution for battery-friendly technology. In this research we have addressed the solution to increasing the battery lifetime with variable data transmission rates from medical equipment as Wireless Endoscopy Capsules, this device will analyze a patient's inner body gastrointestinal tract by capturing images and visualization at the workstation. The second major issue is that the Wireless Endoscopy Capsule based systems are currently not used for clinical applications due to their low data rate as well as low resolution and limited battery lifetime, in case of these devices are more enhanced in these cases it will be the best solution for the medical applications. The main objective of this research is to power optimization by reducing the power consumption of the battery in the Wireless Endoscopy Capsule to make it battery-friendly. To overcome the problem we have proposed the algorithm for "Battery Friendly Algorithm" and we have compared the different frame rates of buffer sizes for Transmissions. The proposed Battery Friendly Algorithm is to send the images on average frame rate instead of transmitting the images on maximum or minimum frame rates. The proposed algorithm extends the battery lifetime in comparison with the previous baseline proposed algorithm as well as increased the battery lifetime of the capsule.

• Journal of Communications and Networks
• /
• v.7 no.2
• /
• pp.222-230
• /
• 2005

This article presents a field evaluation of an IP-based architecture for heterogeneous environments that has been developed under the aegis of the Moby Dick project, covering UMTS-like (universal mobile telecommunications system) TD-CDMA (time division-code division multiple access) wireless access technology, wireless and wired LANs. The architecture treats all transmission capabilities as basic physical and data-link layers, and replaces all higher-level tasks by IP-based strategies. The Moby Dick architecture incorporates mobile IPv6, fast handovers, AAA-control (authentication, authorisation, accounting), charging and quality of service (QoS) in an integrated framework. The architecture further allows for optimised control on the radio link layer resources. It has been implemented and tested by expert users, and evaluated by real users on field trials with multiple services available.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.12
• /
• pp.179-184
• /
• 2018

In this paper, we have proposed the development of DC-DC converter for LRT power supply. First of all, we have studied converter technology, main functions and characteristics were determined. In also, the converter design was carried out to meet the system design conditions. Based on this design, converter simulation is performed to enable stable charging and discharging of the vehicle system. We have performed the Light-load test according to charge mode, discharge mode. As a result, the manufactured converter performance was verified through the load test, and it's stability was confirmed.

• Journal of Power Electronics
• /
• v.19 no.2
• /
• pp.602-611
• /
• 2019

The major drawbacks of magnetic resonant coupled wireless power transfer (WPT) to the embedded sensors on spindles are transmission instability and low efficiency of the transmission. This paper proposes a novel double-loop coil design for wirelessly charging embedded sensors. Theoretical and finite-element analyses show that the proposed coil has good transmission performance. In addition, the power transmission capability of the double-loop coil can be improved by reducing the radius difference and width difference of the transmitter and receiver. It has been demonstrated by analysis and practical experiments that a magnetic resonant coupled WPT system using the double-loop coil can provide a stable and efficient power transmission to embedded sensors.

• Journal of the Korean Society for Railway
• /
• v.20 no.1
• /
• pp.31-42
• /
• 2017

Many studies have been performed to reduce electric consumption in railway systems. Due to its low conduction loss and high regenerative braking efficiency characteristics, the ESS powered railway system is chosen as a promising candidate for future railway systems. This paper introduces the ESS powered railway system and analyzes current power charge calculation methods that have been set up by KEPCO (Korea Electric Power Corporation). Based on the analysis, this paper proposes two different power charge reduction methods for the railway system. One is to smooth the peaks of traction energy consumption by supplying additional energy to the grid. The other is to save electric charge by reducing electric energy consumed by the railway during the energy peak time, 2 p.m.~5 p.m., which has highest 'Won/kWh' rates. To verify the effectiveness of the proposed method, the power charge of Seoul Metro Line 2 is recalculated using the method.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.1
• /
• pp.31-36
• /
• 2011

Ubiquitous network and wireless sensor networks is being applied in various fields. Located at target areas, node of wireless sensor network uses batteries as a power source. Batteries have a limited energy in sensor network applications. Also, before use, the battery must be charged and It is difficult to replace the battery. Therefore, energy harvesting technology is being researched and being developed for long life of sensor node. Especially, sola energy is being extensively researched. because that can have great amounts of energy than other environmental energy in a short time. In this study, we tested battery charging and recharging, operation of sensor node using Solar Cell. Also, monitoring data gathering and voltage Analysis showed energy harvesting time of Sola Cell battery for sensor node and operation of sensor node.

• Journal of electromagnetic engineering and science
• /
• v.16 no.4
• /
• pp.199-205
• /
• 2016

We present a novel schematic using a 3-dB coupler to transmit radiofrequency (RF) power to two receivers selectively. Whereas previous multiple receiver supporting schemes used hardware-switched methods, our scheme uses a soft power-allocating method, which has the advantage of variable power allocation in real time to each receiver. Using our scheme, we can split the charging area and focus the RF power on the targeted areas. We present our soft power-allocating method in three main points. First, we propose a new power distribution hardware structure using a FPGA (field-programmable gate array) and a 3-dB coupler. It can reconfigure the transmitting power to two receivers selectively using accurate FPGA-controlled signals with the aid of software. Second, we propose a power control method in our platform. We can variably control the total power of transmitter using the DC bias of the drain input of the amplifier. Third, we provide the possibility of expansion in multiple systems by extending these two wireless power transfer systems. We believe that this method is a new approach to controlling power amplifier output softly to support multiple receivers.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2317-2318
• /
• 2008

This report is about wireless energy transform system. It means something to charge without a line of contact. Existing charging has been many defect, including badness of the line, limitation of the space and the time and so on But this is one of the way that can complement it. So our goal is making the wireless charger that is effective and easy to use.

• Journal of Internet Computing and Services
• /
• v.18 no.6
• /
• pp.15-23
• /
• 2017

Wireless power transmission (WPT) for wireless charging is currently attracting much attention as a promising approach to miniaturize batteries and increase the maximum total range of an electric vehicle. The main advantage of the laser power beam (LPB) approach is its high power transmission efficiency (PTE) over long distance. In this paper, we present the design of a laser power beam based WPT system, which has a best WPT channel selection technique at the receiver end when multiple power transmitters and single power receiver are operated simultaneously. The transmitters send their transmission channel information via optically modulated laser pulses. The receiver uses the received signal strength indicator and digitized data to choose an optimum power transmission path. We modeled a vertical multi-junction photovoltaic cell array, and conducted an experiment and simulation to test the feasibility of this system. From the experimental result, the standard deviation between the mathematical model and the measured values of normalized energy distribution is 0.0052. The error between the mathematical model and measured values are acceptable, thus the validity of the model is verified.