• Journal of electromagnetic engineering and science
• /
• 제11권3호
• /
• pp.166-173
• /
• 2011

In this paper, we implemented and analyzed a wireless power transfer (WPT) system with a CSPR topology. CSPR refers to constant current source, series resonance circuit topology of a transmitting coil, parallel resonance circuit topology of a receiving coil, and pure resistive loading. The transmitting coil is coupled by a magnetic field to the receiving coil without wire. Although the electromotive force (emf) is small (about 4.5V), the voltage on load resistor is 148V, because a parallel resonance scheme was adopted for the receiving coil. The implemented WPT system is designed to be able to transfer up to 1 kW power and can operate a LED TV. Before the implementation, the EMF reduction mechanism based on the use of ferrite and a metal shield box was confirmed by an EM simulation and we found that the EMF can be suppressed dramatically by using this shield. The operating frequency of the implemented WPT system is 30.7kHz and the air gap between two coils is 150mm. The power transferred to the load resistor is 147W and the real power transfer efficiency is 66.4 %.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1656-1663
• /
• 2016

A capacitive wireless power transfer (C-WPT) system uses an electric field to transmit power through a physical isolation barrier which forms a pair of ac link capacitors between the metal plates. However, the physical dimension and low dielectric constant of the interface medium severely limit the effective link capacitance to a level comparable to the main switch output capacitance of the transmitting circuit, which thus narrows the soft-switching range in the light load condition. Moreover, by fundamental limit analysis, it can be proved that such a low link capacitance increases operating frequency and capacitor voltage stress in the full load condition. In order to handle these problems, this paper investigates optimal design of double matching transformer networks for C-WPT. Using mathematical analysis with fundamental harmonic approximation, a design guideline is presented to avoid unnecessarily high frequency operation, to suppress the voltage stress on the link capacitors, and to achieve wide ZVS range even with low link capacitance. Simulation and hardware implementation are performed on a 5-W prototype system equipped with a 256-pF link capacitance and a 200-pF switch output capacitance. Results show that the proposed scheme ensures zero-voltage-switching from full load to 10% load, and the switching frequency and the link capacitor voltage stress are kept below 250 kHz and 452 V, respectively, in the full load condition.

• 한국통신학회논문지
• /
• 제37A권9호
• /
• pp.799-808
• /
• 2012

WAVE(Wireless Access for Vehicular Environment) 시스템에서 스크램블러의 비트 연산은 하드웨어나 소프트웨어 측면에서 병렬 처리가 불가능하여 효율성이 떨어지게 된다. 본 논문에서는 행렬 테이블에서 시작 위치를 찾는 알고리즘을 제안한다. 또한 스크램블러의 비트 연산 알고리즘과 행렬 테이블 구성 알고리즘, 행렬 테이블에서 시작 위치를 찾는 알고리즘을 8비트, 16비트, 32비트 단위로 처리하여 성능을 비교 분석한 결과 초당 처리 횟수는 8비트는 2917.8회, 16비트는 5432.1회, 32비트는 10277.8회 더 수행할 수 있었다. 따라서 행렬 테이블에서 시작 위치를 찾는 알고리즘이 WAVE 시스템에서 스크램블러의 속도를 향상시키고, 지능형 교통 체계(ITS)에서 노변장치와 차량(V2I) 또는 차량 사이의 통신(V2V)으로 다양한 정보 수집의 수신 속도와 정밀도를 향상시킬 수 있다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권11호
• /
• pp.654-659
• /
• 2005

An improved power supply for APD(Avalanche Photo Diode) with a received optical power monitoring circuit allows the received optical power increase temporary without of the degradation of the electrical signal. For the cost reduction and simple fabrication, an improved power supply has been proposed that it was designed for driving a APD as a receiving device of a wireless optical transmission system. It was demonstrated that it was possible to improve a dynamic range by compensating the temperature coefficient of the APD up to 1.0 V/$^{\circ}C$ through the power supply. Also, for an efficient transmission at the receiver end, a simple structure of a single cylindrical micro-lens configuration was used in conjunction with the laser diode to partially compensate a laser beam ellipticity. For this purpose, an astigmatism introduced by the micro-lens is utilized for the additional compensation of the beam ellipticity at the receiver end. In this paper, it is demonstrated that an efficient beam shaping is realized by using the proposed configuration consisting of the single lens attached to the laser diode.

• 전자공학회논문지
• /
• 제50권10호
• /
• pp.98-104
• /
• 2013

본 논문에서는 무선 통신 및 근거리 위치 인식이 가능한 WBAN(wireless body area network) 용 UWB(Ultra-wide band) 수신기 회로를 제안한다. UWB 수신기는 에너지 검출 방식의 OOK(on-off keying) 변조가 가능하도록 설계가 되었다. 고속의 sampling 을 하기 위해서 4bit ADC 는 DLL(delay locked loop) 을 이용하여 sub-sampling 기법을 사용하도록 설계되었다. 제안된 UWB 수신기는 CMOS $0.18{\mu}m$ 공정을 이용하여 설계되었으며, 전원 전압 1.8V에서 61mA의 전류를 소모하면서 -85.7dBm의 수신 감도, 42.1dB의 RF front-end 게인, 3.88 dB의 noise figure, 최대 4m 까지의 거리 감지 성능을 가지고 있다.

• 한국항행학회논문지
• /
• 제27권6호
• /
• pp.861-864
• /
• 2023

Recently, V2X (vehicle-to-everyting) communication has established itself as an essential technology for cooperative autonomous driving. V2X communication currently includes DSRC (dedicated short range communication) communication technology, which is a WLAN (wireless local area network) based communication technology, and C-V2X (cellular-V2X) communication technology, which is a Cellular-based communication technology. Since these two communication methods are not compatible with each other, various studies and experiments are being conducted to select one of the two communication methods. In the case of C-V2X communication, there are LTE-V2X (long term evolutionV2X) communication technology, which is an initial version, and 5G-V2X communication technology, which is a next-generation version. 5G-V2X communication technology has been completed only until standardization, so LTE-V2X communication technology is mainly used. In this paper, we introduce trends related to various issues in V2X communication, including communication method decisions.

• Smart Structures and Systems
• /
• 제5권6호
• /
• pp.663-679
• /
• 2009

The use of Micro-Electro-Mechanical Systems (MEMS) accelerometers in geotechnical instrumentation is relatively new but on the rise. This paper describes a new MEMS-based system for in situ deformation and vibration monitoring. The system has been developed in an effort to combine recent advances in the miniaturization of sensors and electronics with an established wireless infrastructure for on-line geotechnical monitoring. The concept is based on triaxial MEMS accelerometer measurements of static acceleration (angles relative to gravity) and dynamic accelerations. The dynamic acceleration sensitivity range provides signals proportional to vibration during earthquakes or construction activities. This MEMS-based in-place inclinometer system utilizes the measurements to obtain three-dimensional (3D) ground acceleration and permanent deformation profiles up to a depth of one hundred meters. Each sensor array or group of arrays can be connected to a wireless earth station to enable real-time monitoring as well as remote sensor configuration. This paper provides a technical assessment of MEMS-based in-place inclinometer systems for geotechnical instrumentation applications by reviewing the sensor characteristics and providing small- and full-scale laboratory calibration tests. A description and validation of recorded field data from an instrumented unstable slope in California is also presented.

• 한국정보통신학회논문지
• /
• 제7권5호
• /
• pp.986-992
• /
• 2003

In this paper we challenge the user Authentication using Kerberos V5 authentication protocol in WPKI environment. this paper is the security structure that defined in a WAP forum and security and watches all kinds of password related technology related to the existing authentication system. It looks up weakness point on security with a p개blem on the design that uses wireless public key-based structur and transmission hierarchical security back of a WAP forum, and a server-client holds for user authentication of an application level all and all, and it provides one counterproposal. Therefore, We offer authentication way solution that connected X.509 V3 with using WIM for complement an authentication protocol Kerberos V5 and its disadvantages.

• 한국통신학회논문지
• /
• 제41권11호
• /
• pp.1574-1579
• /
• 2016

본 논문은 무인항공기 비행시간 향상을 위해 RF 무선 전력 획득 기술을 이용한 self-powered 센서 노드 회로에 관해 설계 연구하였다. 제안하는 센서 노드는 두 가지 경우가 만족하였을 때 동작한다. 마스터 노드의 입력 RF ID와 센서 노드의 ID가 같을 경우와 RF 무선 전력 획득 시스템이 히스테리시스 스위치에 의해 동작될 때다. 마스터 노드의 출력은 263 MHz에서 26 dBm을 사용하였다. RF 전력을 DC 전력으로 변환하는 최대 효율은 마스터 노드에서 2미터 떨어진 지점(4-6 dBm)에서 55 %이다. 최대 RF 무선 전력 획득 범위는 마스터 노드와 센서 노드의 거리가 약 13 m 이다. 센서 노드의 MCU 및 수신기와 온도 센서와 같은 부하의 소비 전력은 10 msec 동안 5.0 V에서 평균 15 mA이다.

• 한국인터넷방송통신학회논문지
• /
• 제12권6호
• /
• pp.111-116
• /
• 2012

차량통신은 정보통신기술과 차량 및 도로 기술을 결합한 대표적인 융합기술중 하나이다. 일반적으로 차량통신은 WAVE (Wireless Access in Vehicular Environments)라 일컫어지는 IEEE 802.11p 표준을 채택하고 있다. 본 논문에서는 차량-노변기지국간 통신 및 차량간 통신을 지원하는 IEEE 802.11p 기반 통신시스템의 멀티홉 전송방식에 대해 알아본다. 먼저 IEEE 802.11p 기반 통신시스템의 성능에 대해 간단히 살펴본 후 브로드캐스팅과 유니캐스팅의 멀티홉 전송 방식에 대해 소개한다. 제안된 방식의 성능은 실제 시스템을 구현한 후 실험을 통한 결과를 통해 알아본다.