• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.6
• /
• pp.817-824
• /
• 2016

A simultaneous bidirectional transceiver over a single wire has been developed in a 65 nm CMOS technology for a command and control bus. The echo signals of the simultaneous bidirectional link are cancelled by controlling the decision level of receiver comparators without power-hungry operational amplifier (op-amp) based circuits. With the clock information embedded in the rising edges of the signals sent from the source side to the sink side, the data is recovered by an open-loop digital circuit with 20 times blind oversampling. The data rate of the simultaneous bidirectional transceiver in each direction is 75 Mbps and therefore the overall signaling bandwidth is 150 Mbps. The measured energy efficiency of the transceiver is 56.7 pJ/b and the bit-error-rate (BER) is less than $10^{-12}$ with $2^7-1$ pseudo-random binary sequence (PRBS) pattern for both signaling directions.

• Transactions of Materials Processing
• /
• v.18 no.3
• /
• pp.229-235
• /
• 2009

This paper covers finite element simulations to evaluate the terminal crimping process of automobile electrical connector. Crimping is a classical technology process to ensure the electrical and the mechanical link between a wire and a terminal. Numerical modeling of the process is helpful to choose and to optimize the dimensions of the crimping part of the connector. In this paper, we discuss a 2D simulation of the crimping process, using explicit finite element methods (ABAQUS/Explicit) and we compare the results with experimental data from the industrial process of crimping (crimping height, crimping width and compressibility). The explicit method is preferred for the modeling of multi-contact problems, in spite of the quasi-static process of crimping. As compared with CAE analysis, a performance improvement makes certain of the truth of the matter.

• Journal of Internet Computing and Services
• /
• v.7 no.5
• /
• pp.25-31
• /
• 2006

According to the development of a mobile node and the increase of number of its users, the demands for connecting to the networks beyond the spaces through the existing wire or wireless communications have abruptly been increasing, which not only allows the ad hoc networks to be developed actively but also makes us consider the routing policy to transfer data safely. In this thesis, the routing protocol to send data stably by improving the route stability in the ad hoc networks is proposed, and its performance is analyzed through the simulations.

• Journal of the korean Society of Automotive Engineers
• /
• v.12 no.6
• /
• pp.60-66
• /
• 1990

In order to measure the piston surface temperature and heat flux, autors have developed the measuring system with an instantaneous temperature probe. Such the instantaneous temperature probes were embodied into the top of piston for measurement and L-link system, designed to fit the test engine, extracts the thermocouple wires from the piston outside of engine employing a mechanical linkage. Then the instantaneous surface temperature was measured to calculate the heat flux flowing into the top surface of piston in a spark ignition engine. As a result, the following phenomena have been obtained through the study. 1) It is found that the time response and durability of temperature probe with a thin film thickness 10um and mechanical linkage with thermocouple wire extraction is sufficient at this experiment. 2) For the quantitative effect of variation in engine speed, the temperature swing and heat flux on the top of piston increase with increasing the engine speed. 3) It is proved that the temperature swing and heat flux decrease with distance from spark plug.

• Journal of Aerospace System Engineering
• /
• v.11 no.5
• /
• pp.36-41
• /
• 2017

As the space debris in the satellite orbit increases, the risk of collision between the currently operating satellites and the space debris is continuously increasing. Therefore, in this study, we designed one-degree-of-freedom capture device using simple deployment mechanism. The capture device consists of four link groups connected with net. To increase the reliability, each link group is connected to one driving part so that the total degree of freedom is 1. In addition, the links were stowed on each side of the satellites so that they would not affect the janitor satellite mission. Finally, to confirm the possibility of deployment in the space environment, we carried out deployment experiments in water similar to the microgravity environment, and confirmed the deployment of capture device and the possibility of capturing target satellite.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.12
• /
• pp.891-898
• /
• 2009

This paper suggests producer/consumer-based Data Binder enabling applications and biomedical devices developed by mutually different vendors to transfer data dynamically. Data Binder is implemented as a bundle of OSGi platform providing component-based programming model and service-oriented operation architecture. Data Binder complements the disadvantage of OSGi WireAdmin service enabling static data delivery between a producer and a consumer of data. Data Binder normalizes an application requirement as an application descriptor and a device capability as a device descriptor so that it enables dynamic data delivery by making data producer/consumer pair in runtime. Therefore, Data Binder can be used as a connection management of a data link between a data producer and a data consumer in sensor-based application development. The object of this paper is to provide the facility of the healthcare service development by separating a data producer such as a biomedical device from a data consumer such as a healthcare application.

• The KIPS Transactions:PartC
• /
• v.18C no.3
• /
• pp.179-186
• /
• 2011

Wireless Mesh Network technology refers to the technology which establishes wireless network whose transmission speed is similar to that of the wire system, and provides more enhanced flexibility in the building of network, compared to the existing wired network. In addition, it has the feature of less mobility and less restriction from the energy effect. However, there follow many considerations such as system overhead in the case of setting or the selection of multi-path. Accordingly, the focus is on the design and optimization of network which can reflect this network feature and the technology to establish path. This paper suggests the methods on the programming of path in Wireless Mesh Network routing by applying the evaluation value of node service, making use of the loss rate of data, the hop count of bandwidth and link and the traffic status of node, considering the performance of link and load in the fitness evaluation function, in order to respond to the programming of multi-path effectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.10
• /
• pp.1353-1358
• /
• 2021

IoT (Internet of Things) emerges from various technologies such as communications, micro processors and embedded system and so on. The IoT has also been used to UAV (Unmanned Aerial Vehicle) system. In manned aircraft, a pilot and co-pilot should control FCS (Flight Control System) with FBW(Fly By Wire) system for flight operation. In contrast, the flight operation in UAV system is remotely and fully managed by GCS (Ground Control System) almost in real time. To make it possible the communication channel should be necessary between the UAV and the GCS. There are many protocols between two systems. Amongst them, MAVLink (Macro Air Vehicle Link) protocol is representatively used due to its open architecture. MAVLink does not define any securities itself, which results in high vulnerability from external attacks. This paper proposes the method to enhance data security in GCS network by applying cryptographic methods to the MAVLink messages in order to support safe UAV operations.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.1
• /
• pp.8-13
• /
• 2022

This paper investigates the method to implement a RF (Radio Frequency) energy harvesting sensor node and to build a sensor network using a CATV network and a leaky coaxial cable. The power supply of a sensor node is designed with the WPTS (Wireless Power Transfer System) receiver operating at 915MHz. A sensor network has limited coverage by the loss of RF signal at a wireless transmission link. The paper proposes to build a sensor network that the BLE signal of a sensor and the signal of a WPTS power transmitter are transmitted through a coaxial cable of a CATV network by utilizing WOC (WiFi over Coax) technology and radiates at a leaky coaxial cable. The length of a leaky coaxial cable and the total loss of a wire link are allowed to the point that the RSSI of a sensor node is more than the minimum value (-78dBm) and lead to extend wireless coverage.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.1
• /
• pp.1-14
• /
• 2010

It is recently issued scalability, mobility and external internet connection on Wire-less sensor network. The low power wireless sensor networks based on IPv6 technology 6LoWPAN technology is being standardized in the IETF. This paper for the 6LoWPAN environment based on the routing protocol LOAD, route cost applied the packet re-transmission rate which follows in Link Qualities price which uses at course expense and packet transmission Minimum route Cost routing protocol where does on the course wherethe smallest packet re-transmission becomes accomplished proposed. The technique which proposes compared and LOAD and AODV that about 13%, about 16% energy consumption is few respectively averagely, Energy of the entire network equally, used and energy effectiveness and improvement of network life time experiment led and confirmed.