• 한국환경보건학회지
• /
• 제26권3호
• /
• pp.55-60
• /
• 2000

Wire codes, introduced by Wertheimer and Leeper, are interesting largely because several case-control studies have reported associations between them and certain types of cancers, including childhood leukemia. This paper is concerned with the reliability of wire codes as a surrogate for residential electric and magnetic field, divided into four categories based on the electrical wiring within 40m of homes. To examine the correlation between spot measurements and wire codes, EMF was measured by using HI-3604 and classified by wire codes. The correlation between long-transformed RMS of magnetic field and wire codes was 0.81. But the correlation between log-transformed RMS of electric field and wire codes was 0.27. The results led us to determine a four category from of the Wertheimer and Leeper code that 1) may be useful in domestic epidemiological studies and 2) is not suitable for electric field exposure. Thus, the critical point of exposure assessment in residential magnetic field is to classify a wire code precisely.

• 항공우주기술
• /
• 제13권2호
• /
• pp.38-46
• /
• 2014

CRC (Cyclic Redundancy Codes)는 데이터 전송 시 오류 발생 유무를 검출하기 위한 하나의 방법으로, 정지궤도복합위성(GEO-KOMPSAT 2B) 개발에서는 정지궤도환경탑재체와 위성 간의 GRDDP (GOES-R Reliable Data Delivery Protocol)에 사용되고 있다. 본 논문에서는 CRC를 구현할 때 널리 사용하는 테이블 기반 CRC의 원리를 소개하고, 이를 기반으로 환경탑재체 개발에서 사용 중인 CRC8을 소프트웨어로 구현한 결과를 설명한다.

• Earthquakes and Structures
• /
• 제16권3호
• /
• pp.253-263
• /
• 2019

The efficacy of a galvanized steel wire mesh (GSWM) as an alternative material for the rehabilitation of RC beam-column connections damaged due to reversed cyclic loading was investigated. The repair mainly uses epoxy resin infused under pressure into the damaged zone and then confined using three types of locally available GSWM mesh. The mesh types used herein are (a) Weave type square mesh with 2mm grid opening (GWSM-1) (b) Twisted wire mesh with hexagonal opening of 15 mm (GSWM-2) and (c) welded wire mesh with square opening of 25 mm (GSWM-3). A reduced scale RC beam-column connection detailed as per ductile detailing codes of Indian Standard was considered for the experimental investigation. The rehabilitated specimens were also subjected to similar cyclic displacement. Important parameters related to seismic capacity such as strength, stiffness degradation, energy dissipation, and ductility were evaluated. The rehabilitated connections exhibited equal or better performance and hence the adopted rehabilitation strategies could be considered as satisfactory. Confinement of damaged region using GSWM-1 significantly enhanced the seismic capacity of the connections.

• Tribology and Lubricants
• /
• 제23권4호
• /
• pp.149-155
• /
• 2007

The CAD model of a elliptical gear for wire cutting has been developed. The rolling contact of pitch ellipses whose rotation axes coincide with their focus has been analyzed, and the perimeter of the pitch ellipse has been divided into equal-length segments by the number of teeth. A master tooth profile, which is a composite curve of circular arcs that represents involute, has been introduced. The elliptical gear has been designed by imposing the master tooth on the divided points of the pitch ellipse, and a full fillet has been achieved between neighbour teeth. Thus, the whole profile of an elliptical gear is a composite curve of arcs only, and consequently NC codes for wire cutting can be easily generated. Furthermore, a computer simulation program is developed to verify the mesh of the elliptical gear.

• Tribology and Lubricants
• /
• 제24권5호
• /
• pp.221-227
• /
• 2008

This paper presents a step-by-step design of noncircular gears. From the diagram of angular velocity ratio of a noncircular gear pair, the pitch curves of the two mating gears are determined, and the perimeter of the pitch curve has been divided into equal-length segments by the number of teeth. A master tooth profile, which is a composite curve of circular arcs that represents involute, has been introduced. A noncircular gear pair has been designed by imposing the master tooth on the divided points of the pitch curve, and a full fillet has been achieved between neighbour teeth. Thus, the whole profile of the noncircular gear is a composite curve of arcs only, and consequently NC codes for wire EDM can be easily generated.

• Smart Structures and Systems
• /
• 제17권4호
• /
• pp.577-591
• /
• 2016

In this study, the transfer length of 2400 MPa, seven-wire high-strength steel strands with a 15.2 mm diameter in pretensioned prestressed concrete (PSC) beams utilizing high strength concrete over 58 MPa at prestress release was evaluated experimentally. 32 specimens, which have the variables of concrete compressive strength, concrete cover depth, and the number of PS strands, were fabricated and corresponding transfer lengths were measured. The strands were released gradually by slowly reducing the pressure in the hydraulic stressing rams. The measured results of transfer length showed that the transfer length decreased as the concrete compressive strength and concrete cover depth increased. The number of strands had a very small effect, and the effect varied with both the concrete cover depth and concrete strength. The results were compared to current design codes and transfer lengths predicted by other researchers. The comparison results showed that the current transfer length prediction models in design codes may be conservatively used for 2400 MPa high-strength strands in high-strength concrete beams exceeding 58 MPa at prestress release.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.715-718
• /
• 2016

우주 비행체의 온보드(on-board) 데이터 처리를 위해 고안된 스페이스와이어(SpaceWire)에는 네트워크의 시각 동기화를 위한 타임코드(time-code)가 정의되어있다. 타임코드가 네트워크를 통하여 전송되는 과정에서 전송 지연 및 지터(jitter)가 발생하며 이것은 시각 동기화 오차의 주요 원인이 된다. 본 논문은 스페이스와이어 표준에 정의되어 있는 타임코드를 확장하여 스페이스와이어 네트워크의 시각 동기화 오차를 줄이는 방안을 제안한다. 제안된 방안은 타임코드의 전송 지터에 따른 오차를 제거하고 타임코드가 링크를 거칠 때마다 발생하는 전송 지연을 제거할 수 있다. 그리고 그 효과는 OMNeT++을 이용하여 개발된 스페이스와이어 네트워크 시뮬레이션 환경을 이용하여 검증한다.

• 한국정보통신학회논문지
• /
• 제21권4호
• /
• pp.724-730
• /
• 2017

항공우주분야 시스템의 네트워크 구현을 위해 고안된 스페이스와이어에는 네트워크의 시각 동기화를 위한 타임코드가 정의되어있다. 스페이스와이어 네트워크에서 타임코드가 링크를 통과할 때마다 14[bit-period]의 전송 지연과 최대값이 10[bit-period]인 전송 지터가 발생하며 이것은 시각 동기화 오차의 주요 원인이다. 본 논문은 스페이스와이어 표준에 정의되어 있는 타임코드를 확장하여 시각 동기화 성능을 개선하는 방법을 제안한다. 타임 마스터와 시각 동기화를 수행하는 노드들은 확장된 타임코드들을 이용하여 시각 정보가 전송되는 과정에서 발생한 전송 지연과 지터를 파악하고 이를 이용하여 시각 동기화 보정을 수행할 수 있다. 제안된 방법의 효과는 OMNeT++ 기반의 스페이스와이어 네트워크 시뮬레이션 환경을 이용하여 분석되었으며 그 결과 수 [bit-period] 이내의 오차로 시각 동기화가 가능하다는 것이 확인되었다. 제안된 방법은 소규모 스페이스와이어 네트워크 시스템에 적합하며 이전 연구 결과들에 비해 구현에 따른 비용 대비 매우 효과적인 성능 향상을 얻을 수 있다.

• 대한조선학회논문집
• /
• 제29권3호
• /
• pp.15-20
• /
• 1992

이 논문에서는 화가의(Painter's) 알고리듬을 사용하여 3차원 자유형상곡면(Three dimensional free form surface)을 가시화하는 방법을 개발하였고, 특히 선체형상은 Open 균일 B-Spline 곡면으로 정의하였다. 컴퓨터그래픽스를 응용하여 와이어프레임, 숨은면제거, 묘영등의 가시화를 위한 프로그램을 완성하였다. 또한 선체곡면의 순정을 검토하기 위해 Gaussian 곡률값을 15등급으로 구분하여 등급별 색(color)처리 하였다.

• Nuclear Engineering and Technology
• /
• 제48권2호
• /
• pp.376-385
• /
• 2016

A hexagonally arrayed 37-pin wire-wrapped rod bundle has been chosen to provide the experimental data of the pressure loss and flow rate in subchannels for validating subchannel analysis codes for the sodium-cooled fast reactor core thermal/hydraulic design. The iso-kinetic sampling method has been adopted to measure the flow rate at subchannels, and newly designed sampling probes which preserve the flow area of subchannels have been devised. Experimental tests have been performed at 20-115% of the nominal flow rate and $60^{\circ}C$ (equivalent to Re ~ 37,100) at the inlet of the test rig. The pressure loss data in three measured subchannels were almost identical regardless of the subchannel locations. The flow rate at each type of subchannel was identified and the flow split factors were evaluated from the measured data. The predicted correlations and the computational fluid dynamics results agreed reasonably with the experimental data.