• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.578-582
• /
• 2007

In this paper, vibration modes and frequencies of a ring-type stacked piezoelectric actuator for a wire bonding transducer system are analyzed using FEM simulations. We implement experiments using a commercial product model of the actuator PZT module which consists of 6 layer ring-type PZT and 7 electrodes, combined bolts, nut and tinut. There are two main results: One is that FEM analysis should consider the effect the harmonic voltage input in order to meet the experimental results. The other is that the current wire bonder using exciting frequency of 136 kHz should be modified in order to improve the actuator and bonding performance because the actuator module has the main longitudinal mode of 145 kHz.

• 한국항공운항학회지
• /
• 제23권1호
• /
• pp.67-73
• /
• 2015

The previous limited authority system capable of implementing attitude command response type and translational command response type by operating SAS actuator has the problem of early saturation of SAS actuator since SAS actuator should compensate the mechanical linkage displacement caused by control sick movement. In this paper, a limited authority system where flight control computer receives the command from the control stick which is not connected to the mechanical linkage is described. In this system the compensation by the SAS actuator is not necessary and SAS actuator saturate later. SAS actuator saturation problem can be further relaxed by using the trim actuator. This new limited authority system is applied to BO-105 model, simulation is performed for the doublet input and pirouette maneuver is also simulated and analyzed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.351-351
• /
• 2004

For greeting the era of ubiquitous network, data storage devices have been essentially attached to mobile data devices. As a result, the minimization of the storage device has arisen as major interests in the next generation data storage technology. So, there are many researches for the small form factor ODD. In this paper, we propose a pick up that consists of a linear VCM and 2-wire focusing actuator for a small form factor ODD. For the sake of checking performance of the coarse actuator, PID controller is designed. Experiment with controller and DSP board shows its propriety as a fine tracking actuator. And, 2-wire suspension actuator is designed in order to be contained in a coarse actuator and to satisfy the thickness of a PCMCIA type. Through the experiment of designed actuator, It verifies performance as a focusing actuator.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.788-793
• /
• 2002

Hybrid type slim tilt actuator and 6-wire supported are developed for DVD recording in the optical disc drive of notebook PC, which can compensate the inclination of disc and objective lens. The hybrid actuator uses the actuating method of moving coil in the focus and track direction and that of moving magnet in the tilt direction. Comparing with 6-wire supported actuator and hybrid type actuator, we can choose an actuator for slim super combo pickup. Two actuator are designed through the modal analysis and magnetic field analysis and experimental results shows dynamic characteristics. Finally, it is verified that the actuator can compensate the disc tilt of ${\pm}0.4^{\circ}$.

• Composites Research
• /
• 제22권2호
• /
• pp.37-42
• /
• 2009

이 논문은 형상기억합금 선재를 이용한 굽힘 작동기의 실험적인 설계방법을 다루고 있다. 제안된 굽힘 작동기는 유리섬유 프리프레그를 이용하여 만든 스트립, 스프링 그리고 형상기억합금 선재로 구성된다. 굽힘 작동기에서 스트립은 초기에 형상기억합금 선재에 초기하중을 가하기 위하여 굽힘 형태로 정되며, 스프링은 형상기억합금 선재가 작동 후 빠른 시간내에 초기 형상으로 돌아오기 위한 보조수단으로 사용된다. 먼저 형상기억합금 선재의 특성을 알아보기 위하여 시차주사열량계(DSC)를 이용한 실험, 여러 종류의 초기 하중을 가한 후 작동 성능 실험, 인장 시험, 온도 변화에 따른 기계적 거동을 조사하였다 이를 바탕으로 스트립, 스프링, 인가 전압에 의한 영향을 관찰하고 소모전력을 분석하여 굽힘 작동기를 설계하였다. 특정 조건을 갖는 굽힘 작동기는 낮은 소모전력으로 빠른 응답성능을 나다내었다.

• 소음진동
• /
• 제9권5호
• /
• pp.984-990
• /
• 1999

This paper presents the geometrical methodology to decouple the vibration modes of an elastically supported single rigid body in three-dimensional space. It is shown that the vibration modes can be decoupled by placing the center of elasticity at suitable locations and thereby yielding the plane(s) of symmetry for the given stiffness matrix. The developed methodology has been applied to the actuator supported by the 4-wire suspensions in optical discs, which has one plane of symmetry. For this numerical example, the axes of vibrations have been computed and illustrated with the natural frequencies. The forced response at the objective lens is represented and its geometrical interpretation has been explained as the mutual moment between the axis of vibration and the applied wrench times the line coordinates of the axis of vibration.

• International Journal of Automotive Technology
• /
• 제7권3호
• /
• pp.321-327
• /
• 2006

The previous paper described the logic tuning, the vehicle manufacture and the evaluation in the HILS system for the purpose of the development of a Steer-By-Wire(SBW) system. This paper describes the content of applying to a new HILS system, the vehicle manufacture and the result of the evaluation performed in Independent-type SBW(I-SBW) system. Here, the SBW indicates the method of steering both tires by using one motor as the steering gear actuator, similar to the conventional steering system. On the other hand, the I-SBW means the method of steering both front tires independently by using dual motors as the steering gear actuator. As a result, the layout and the kinematical mechanism of the I-SBW system are quite different from those of the typical steering mechanism. Nevertheless, there is no change in the steering column motor system. In the report, we first describe the structure and control logic of the I-SBW system, and then the control effect on this system as applied for both the HILS system and a vehicle. Furthermore, our HILS system involves the actuator mechanism which realizes the reaction force of the road surface with a minimized frictional force in operation. Therefore, it is possible for us to tune the control logic via the HILS system and confirm the effect of the tuned control logic by applying it to a vehicle with the I-SBW system.

• 한국자동차공학회논문집
• /
• 제15권4호
• /
• pp.41-46
• /
• 2007

This article deals with the design and prototyping of Shift-By-Wire system for an automatic transmission equipped vehicle. In order to manipulate the shifting action electronically, Shift-By-Wire system consists of an electronic shift lever, an electric shift actuator and position sensors. The shift lever is designed to transform the driver's shifting command into an electric signal; it includes the position sensor using non-contact type hall sensor and an additional shifting switch acting as Tip-tronic. For the design of an electric shifting actuator, we investigated the stroke angles and shifting efforts of the manual control lever in each shifting section. And the position sensor of the shifting actuator is designed by using a potentiometer with an optical encoder. Finally the prototype of Shift-By-Wire system was built in a conventional 2.4L class SUV vehicle, and we performed road tests in order to verify its performance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1071-1074
• /
• 1995

This paper proposes two directional bending actator using three link, two shape memory alloys(SMA) of coil-type springs and two guide wires. By the heating of two SMA springs sequentially, the bending and stretching of the actuator is possible. Bending angle, force and repeated bending motion of actuator were measured and characterized. The performance of the actuator has been characterized for the possible application for catheter.

• 한국전자통신학회논문지
• /
• 제18권3호
• /
• pp.509-520
• /
• 2023

항공기에서 소형 제트기까지 항공기에 적용되는 플라이 바이 와이어 시스템의 구성 및 특성등에 대하여 기술 하였다. 특히 비행조종컴퓨터 다중화 방안과 데이터 통신 버스, 조종면 작동기, 플라이 바이 와이어 시스템을 통하여 적용되는 제어 법칙 등에 대한 기술 개발 동향에 대해 고찰하였다. 전투기에 처음 적용되었던 플라이 바이 와이어 시스템은 여러 가지 장점으로 인해 까다로운 인증과정을 거쳐 민간 항공기에까지 적용되었고, 최근에는 소형제트기까지 적용 범위가 확장되고 있으며 미래에는 대부분 플라이 바이 와이어 항공기가 주를 이룰 것으로 전망된다.