• Title/Summary/Keyword: Wings

Search Result 527, Processing Time 0.062 seconds

Hot Firing Test of a Quadrature NEA SSD9103S1 Configuration

  • Ja-Chun, Koo;Hee-Sung, Park;Max, Guba
    • International Journal of Aerospace System Engineering
    • /
    • v.9 no.2
    • /
    • pp.1-9
    • /
    • 2022
  • The NEA release mechanism is used to provide restraint and release functions with low shock for critical deployment operations on solar arrays after launch. The GK3 solar array consists of 2 wings and 6 hold down points per panel. The NEA SSD9103S1 is a part of the GK3 solar array hold-down and release mechanism. Each NEA unit is equipped with two Z-diodes which provide power to a NEA unit connected in series after actuation of the fuse wire. This paper presents the hot firing test results of a quadrature NEA SSD9103S1 configuration. One output powers a maximum of 4 NEA SSD9103S1 units simultaneously. The necessary actuation pulse duration has been determined to meet margin requirement for thermal energy of minimum 4. Actuation thermal energy difference is about 6.6% between each half of two fired serial NEAs. Thermal energy margin at worst case is minimum 5.9 in case of an actuation pulse duration of 500 ms. Two series Zener impedance depend on current applied has been characterized by an additional actuation after all fuse wires are open circuit. Total number of actuation commands to the GK3 NEA unit reduce drastically from 24 in case of single NEA configuration down to 8 in case of parallel and quadrature NEA configurations. It can be accommodated by the existing HP2U Pyro design without any impact.

The Development of Textile Pattern Designs for Car Seats Using Patterns Expressed on Nineteenth-century Blue and White Porcelain (19세기 청화백자에 표현된 문양을 활용한 자동차 시트 직물 패턴디자인 개발)

  • Jung, Jin-Soun
    • Fashion & Textile Research Journal
    • /
    • v.24 no.4
    • /
    • pp.372-385
    • /
    • 2022
  • In this study, the patterns expressed on nineteenth-century blue and white porcelain among Joseon white porcelain were selected as the material for the development of the car seat fabric design. It was intended to be applied to car seat design by incorporating Korea's own traditional patterns to fit modern sensibility. First, seven pieces of nineteenth-century blue and white porcelain were selected through the literature, and motifs were produced using adobe illustrator, a computer graphic program. Seven car seat fabric designs were developed according to the construction method and development method of the produced motif. Work 1 was designed to elicit a soft and feminine atmosphere using the peony pattern shown in Table 1-1. Work 2 aimed to express a luxurious atmosphere using the image of the mountain expressed in Table 1-2 as a design material. Works 3 was designed by freely arranging the letters of luck expressed in Table 1-3 to form a free and dynamic image. Work 4 was intended to express a stable and rhythmic atmosphere by horizontally arranging the images of the gently curved wings, tail, and rhythmical tail feathers of the phoenix expressed in Table 1-4. Work 5 was designed in a vertical arrangement using the patterns and silhouettes of the tiger's back expressed in Table 1-5. Work 6 was designed using the wave pattern expressed in Table 1-6 to replicate the rhythmic atmosphere. Work 7 was designed using the images of rocks, waves, and the sun in Table 1-7 to express a calm and antique atmosphere.

Numerical investigation of on-demand fluidic winglet aerodynamic performance and turbulent characterization of a low aspect ratio wing

  • A. Mondal;S. Chatterjee;A. McDonald Tariang;L. Prince Raj;K. Debnath
    • Advances in aircraft and spacecraft science
    • /
    • v.10 no.2
    • /
    • pp.107-125
    • /
    • 2023
  • Drag reduction is significant research in aircraft design due to its effect on the cost of operation and carbon footprint reduction. Aircraft currently use conventional solid winglets to reduce the induced drag, adding extra structural weight. Fluidic on-demand winglets can effectively reduce drag for low-speed flight regimes without adding any extra weight. These utilize the spanwise airflow from the wingtips using hydraulic actuators to create jets that negate tip vortices. This study develops a computational model to investigate fluidic on-demand winglets. The well-validated computational model is applied to investigate the effect of injection velocity and angle on the aerodynamic coefficients of a rectangular wing. Further, the turbulence parameters such as turbulent kinetic energy (TKE) and turbulent dissipation rate are studied in detail at various velocity injections and at an angle of 30°. The results show that the increase in injection velocity shifted the vortex core away from the wing tip and the increase in injection angle shifted the vortex core in the vertical direction. Further, it was found that a 30° injection is efficient among all injection velocities and highly efficient at a velocity ratio of 3. This technology can be adopted in any aircraft, effectively working at various angles of attack. The culmination of this study is that the implementation of fluidic winglets leads to a significant reduction in drag at low speeds for low aspect ratio wings.

Proposal for guided missile actuator device inspection using data acquisition device (데이터 수집 장치를 이용한 유도탄 구동장치 점검 제안)

  • Eui-Jae Jung;Tack-Keun Oh;Jung-Min Lee;Pil-joong Yoo
    • Journal of Advanced Navigation Technology
    • /
    • v.27 no.4
    • /
    • pp.423-428
    • /
    • 2023
  • In the missile actuator system, the time and position of the wings of the drive device are very important factors in the initial maneuver of the missile, and therefore, the missile actuator device must be inspected while ensuring the accuracy and real-time of motion collection data of the actuator. In this study, the difference between the design and implementation method for checking the existing actuator device and the design implementation method of the actuator device through the DAQ(Data Acquisition) device is compared, and the difference in data collection amount and real-time data collection performance is compared and tested, and the data shown through actual tests are compared. is converted into a graph, the actuator waveform is compared and analyzed, and based on the analyzed data, DAQ device inspection configuration that guarantees real-time response speed and stability during inspection of existing actuators and DAQ devices is proposed.

Computed Tomographic Findings in a Foal with Acute Hindlimb Lameness

  • Seyoung Lee;Eun-bee Lee;Kyung-won Park;Taeyoung Kang;Hyohoon Jeong;Jong-pil Seo
    • Journal of Veterinary Clinics
    • /
    • v.40 no.2
    • /
    • pp.135-138
    • /
    • 2023
  • A one-month-old Thoroughbred colt presented with left hindlimb lameness grade 5/5, according to the American Association of Equine Practitioners' lameness scale. The colt started showing signs of lameness two weeks earlier without being involved in an accident. A local veterinarian examined the foal; radiography revealed no significant findings under the hip joint. No improvement was noted after 15 days of non-steroidal anti-inflammatory drugs (NSAIDs) medication. On presentation at our hospital, ultrasonography was performed, which revealed no significant findings in the iliac wings. The foal underwent a computed tomography (CT) scan under general anesthesia. CT revealed bone cysts in the following that could have caused the lameness: the left transverse process of the 5th, 6th lumbar, and the 1st sacrum vertebrae; osteophytes in the auricular surface of the ilium, suggestive of sacroiliac arthritis. The foal recovered smoothly from anesthesia with assistance. The foal was treated with NSAIDs and rested for more than six months. The owner reported that the foal showed no lameness one year later. CT revealed bony changes in the lumbosacral region that were not detected by radiography and ultrasonography, suggesting that CT could be useful for detecting abnormalities in the pelvic region of horses.

Normative Building Types and Layout of Ruling Class Residences in the Seoul area in the Early Joseon Dynasty (조선 전기 서울 지역 지배층 저택의 규범적 건물 유형과 배치)

  • Lee, Jong-Seo
    • Journal of architectural history
    • /
    • v.32 no.5
    • /
    • pp.69-80
    • /
    • 2023
  • Before the 15th century, the main buildings of the residences of the ruling class in Seoul consisted of Momchae(身梗), Seocheong(西廳), and Naeru(內樓)‧Chimru(寢樓). Based on the equality of the relationship between husband and wife, the couple lived in the main building[Momchae] in the center of the mansion, but based on the individuality of the relationship between husband and wife, each had an area consisting of the same section within the building. Naeru·Chimru was the two floors bedroom building became a common living space for the minister and wife, upstairs in summer, downstairs in winter. In preparation for large gatherings and important receptions, an open-structured West Hall(西廳) was located on the west side of the mansion. Momchae, Seocheong, and Naeru‧Chimru were the common building types and layouts of the residences of the highest ruling class, including high-ranking officials, until the reign of King Sejong. However, from around the time of King Seongjong, Seocheong and Chimru came to be regarded as privileged and luxurious buildings only allowed for the grand prince's residence. The layout of the bedroom, main building (including Wings), Outer Sarang[外舍廊], and Joyangru[朝陽樓] of Prince Bongrim's mansion built in the first half of the 17th century clearly shows the transitional period when the arrangement of chimru, main building, and western office was disrupted and the layout changed to the Inner main building(Anchae for wife) and Outer main building(Sarangchae for husband).

Vocal Analysis of Talking Rooster (말하는 닭의 발성 특성 분석)

  • Kyon, Doo-Heon;Bae, Myung-Jin
    • The Journal of the Acoustical Society of Korea
    • /
    • v.29 no.2
    • /
    • pp.125-132
    • /
    • 2010
  • Since the ancient times, animals that can imitate the voices of human beings have been considered extremely special. There are very few such animals, and the parrot is an example of them. For a long time, there had been no reported case of a rooster being able to mimic the voice of a human being, but talking roosters were recently found in Korea and the Kyrgyz Republic, generating much talk. In this study, the vocal characteristics of such roosters were examined, and their pronunciation-related statistics and actual sound sources were analyzed. The analysis results showed that even though the roostets cannot converse with people, they can imitate the human voice, uttering the words "An-dwae," and "A-ni-ya" in Korean, which mean "No" in English, when someone tries to catch their wings. A similar situation 'occurred in the Kyrgyzstan. The results of the listening survey on these sounds made by the roosters showed that most people recognized the words uttered by the roosters and that nobody thought that the words sounded like "cock-a-doodle-doo." It can be said that such roosters can make the sounds of the human voice because of their innate vocal organ and characteristics, which are significantly different from those of the general roosters. Their vocal organ and characteristics cause the sounds that they make to change in their vocal cords due to their high tension when humans try to catch them.

Effect of Transportation Distance of Broilers on Meat Grades and PSE Incidence (육계 출하 시 수송 거리가 닭고기의 도체 등급 및 PSE육 출현에 미치는 영향)

  • Chae, H.S.;Yoo, Y.M.;Jeong, S.G.;Ham, J.S.;Ahn, C.N.;Kim, D.H.;Jang, A.
    • Korean Journal of Poultry Science
    • /
    • v.36 no.1
    • /
    • pp.9-14
    • /
    • 2009
  • This study was conducted to evaluate the effect of three types of transportation distance (short: less than 40 km; intermediate: 70~80 km; long: 140~150 km) on quality of whole chicken and chicken meat cuts. In whole chicken, $1^+$ grade chicken incidence after transportation of short, intermediate, and long distance transportation was 61.3, 56.3, and 43.8%, respectively. Bruise was not shown in breast and thigh, while wings with bruise after short and long distance transportation were 16.7% and 27.3%, respectively. For chicken meat cuts, $1^+$ grade chicken breast incidence after short distance transportation was 14% higher than that after long distance transportation. Bruised chicken breast after short and long distance transportation were 10 and 12%. Pale, soft, and exudative (PSE) chicken breast incidence after long distance transportation was higher (18.3%) than that after short distance transportation (7.0%). Chicken thigh cuts with $1^+$ grade after short and long distance transportation were shown 91.2% and 88.3%, respectively. Also, chicken wing cuts showed similar result to chicken thigh cuts' and $1^+$ grade incidence of chicken wings after short distance transportation was 11% higher than that of after long distance transportation. These results suggest that shorter transportation distance from farm to slaughter house result in high grade whole chicken and chicken meat cuts.

A Study on Fashion Design Applied by Butterfly Image -Focused on the Application Method of the Nubi by Watersoluble Paper- (나비의 이미지를 응용한 의상 디자인 연구 -수용성부직포에 의한 누비 응용기법을 중심으로-)

  • Heo, Jin-Young;Kim, Hye-Yeon
    • Archives of design research
    • /
    • v.19 no.6 s.68
    • /
    • pp.9-14
    • /
    • 2006
  • There are many paintings describing butterfly in a folk story or old story but the word of Nabby is showed up because korea culture is subject to a Chinese character culture area. the word of Nabby is originated from flying features of nabby. It was expressed to an Hoju(胡蝶:swallowtail) or Hwangjub(黃蝶:yellow butterfly) in old book, Nabby or Naboi in Dusiunhae(杜詩諺解) issued in 1481, Naboi in Hunmonjahoe(訓夢字會) issued in 1527 and Nami in Simongunhaemungmyung(時夢諺解物名) issued in Sookjong dynasty(1675$\sim$1720). After that it was called Nabeui or Nabby and Nabby became the standard language but it is still called Nabbo or Nabbe in some provinces. The butterfly have been called as jewelry spread out through the world and people have been attracted by its meaning (love, pleasure, luck, long life and eternity) and its beautiful figure so that they have collected poems and paintings about it to appreciate its beauty or have made craft works and personal ornaments of it. This research is to analyze the shape and color of the using the application method of the nubi, which is used as expression method in this research, is suitable to express the beauty of butterfly's shape and the nerve of its wings and the basic material, which is light and have good drape, was used to easily express the rhythmical movement of butterfly's flapping. And thus, this research is to present that the above expression method is suitable to express the beautiful expression of butterfly's image and have unlimited potential energy for developing designs. Results showed that the soft outline of butterfly's wings can coincide with the linear shape of human body. It was also found that the characteristics of nubi method could be diversified as material expression method and the Haute Couture luxurious work could be developed by applying the mixed nubi method to costumes.

  • PDF

Microbial Hygienic Status of Poultry Meats and Eggs Collected at the Public Markets in Seoul and Kyung-gi Regions in 1996 (1996년도 서울${\cdot}$경기지역에서의 시판계육과 계란에 대한 미생물학적 위생실태)

  • Woo Yong-Ku
    • Korean Journal of Microbiology
    • /
    • v.41 no.1
    • /
    • pp.38-46
    • /
    • 2005
  • To determine the actual hygienic status of domestic chicken meats sold in public markets (conventional markets and department stores), microbial contamination levels (Total cells, Coliforms and Staphylococcal cells) and zoonotic pathogens (Salmonella species, Campylobacter species, Listeria species, and Staphylococcus aureus) isolation tests were conducted. Chicken meats and eggs tested were collected from the conventional markets (Si-Jang) and department-stores located in Seoul and Kyung-gi regions in 1996. In total cells and coliforms contamination tests, chicken meats sold in department stores were much lesser contamination status than those of Si-Jang, but staphylococcal cells level was much more higher than that of conventional markets. Salmonella isolation frequency was investigated as $68.8\%$, but Campylobacter jejuni and Listeria monocytogenes isolation frequency were appeared both $64.0\%\;and\;63.3\%$. In case of eggs sold in public markets, one of S. gallinarum strain $(0.7\%)$ was isolated only on the egg-shell part among the four-hundred and fourty-six. In comparison with foreign imported chicken meats, there were no big differences in microbial contamination status. On the other hand, both Salmonella and L. monocytogenes were isolated only in the chicken wings from Korea and China, but not from U.S.A. This data suggest that more hygienic control system in order to produce the safe and hygienic chicken meats and eggs is need in our country as soon as possible.