• Atmosphere
• /
• v.17 no.1
• /
• pp.109-114
• /
• 2007

The mist on the inside of an automobile windshield is not only uncomfortable but also very dangerous because it obstructs the driver's vision. However, the removal process of the mist has never been studied in detail. This study performed experiments analyzing the mechanism causes the mist in a car and investigated the appropriate removal process. The experiments were performed on two rainy days, 10 April 2006 and 26 May 2006, with temperature and relative humidity sensors of testo-175-H2 and DICKSON-TK500. We found a passenger increased water vapor by 0.2 g $min^{-1}$ through respiration and thereby relative humidity (RH) from 55% to 67% in 8 minutes. Even though RH was not saturated, misting occurred because the humid air contacted the colder surface of the window. To remove the mist, it is necessary to increase the temperature or inflow drier air in the car. Therefore, we expected that the heater would be more effective than air conditioner for this matter. However, the outcome was the other way around due to the structure of the heating and cooling system in the car. When the air-conditioner was on, colder and drier air was generated and flowed through the so-called evaporator. Droplets were produced in the evaporator due to cooling procedure. When the heater was on, the warm air evaporated the droplets and increased the water content in the air resulting in an increase of relative humidity. Consequently, the air conditioner is more effective than the heater to remove the mist.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2441-2451
• /
• 2012

This paper presents the design of a control system for improving performance of a washer fluid heating system (WFHS) which is capable of removing frost, ice, snow and/or other debris from windshield. First, for the WFHS, a modeling process is described, and the extraction of characteristic parameters of the model are made by experimental studies. Design variables that affect on performance of the WFHS are also presented. Secondly, a control system is proposed for improving heating performance of the WFHS, and its performance is verified through experiments. The key feature of the proposed control system is to regulate the current of a booster converter input to the WFHS up to the target value that is set to guarantee heating performance. Target current is calculated by using initial temperature value and employing the mathematical model derived in the paper. Computer simulation and experimental results show that the proposed control system can perform heating operations in a way to satisfy per-determined target performance of the WFHS.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.2
• /
• pp.85-101
• /
• 2015

Objective: The purpose of this study was to develop and evaluate smart secondary controls using iPad for the drivers with physical disabilities in the driving simulator. Background: The physically disabled drivers face problems in the operation of secondary control devices that accept a control input from a driver for the purpose of operating the subsystems of a motor vehicle. Many of conventional secondary controls consist of small knobs or switches that physically disabled drivers have difficulties in grasping, pulling or twisting. Therefore, their use while driving might increase distraction and workload because of longer operation time. Method: We examined the operation time of conventional and smart secondary controls, such as hazard warning, turn signal, window, windshield wiper, headlights, automatic transmission and horn. The hardware of smart secondary control system was composed of iPad, wireless router, digital input/output module and relay switch. We used the STISim Drive3 software for driving test, customized Labview and Xcode programs for interface control of smart secondary system. Nine subjects were involved in the study for measuring operation time of secondary controls. Results: When the driver was in the stationary condition, the average operation time of smart secondary devices decreased 32.5% in the normal subjects (p <0.01), 47.4% in the subjects with left hemiplegic disabilities (p <0.01) and 38.8% in the subjects with right hemiplegic disabilities (p <0.01) compared with conventional secondary devices. When the driver was driving for the test in the simulator, the average operation time of smart secondary devices decreased 36.1% in the normal subjects (p <0.01), 41.7% in the subjects with left hemiplegic disabilities (p <0.01) and 34.1% in the subjects with right hemiplegic disabilities (p <0.01) compared with conventional secondary devices. Conclusion: The smart secondary devices using iPad for people with hemiplegic disabilities showed significant reduction of operation time compared with conventional secondary controls. Application: This study can be used to design secondary controls for adaptive vehicles and to improve the quality of life of the people with disabilities.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.444-448
• /
• 2005

This paper presents a developing procedure of the CAN-based real-time simulator for car body control, aiming at replacing the actual W/H (Wiring Harness) and J/B(Junction Box) couple eventually. The CAN protocol, as one kind of field-bus communication, defines the lowest 2 layers of the ISO/OSI standard, namely, the physical layer(PL) and the data link layer(DLL), for which the CSMA/NBA protocol is generally adopted. For CPU, two PIC18Fxx8x's are used because of their built-in integration of CAN controller, large internal FLASH memory (48K or 64K), and their costs. To control J/B's and actuators, 2 controller boards are separately implemented, between which CAN lines communicate through CAN transceivers MCP255. A power motor for washing windshield, 1 door lock motor, and 6 blink lamps are chosen for actuators of the simulator for the first stage. For the software architecture, a polling method is used for the fast global response time despite its slow individual response time. To improve the individual response time and to escape from some eventual trapped-function loops, High/Low ports of the CPU are simply used, which increases the stability of the actuator modules. The experimental test shows generally satisfactory results in normal transmitting / receiving function and message trace function. This simulator based on CAN shows a promising usefulness of lighter, more reliable and intelligent distributed body control approach than the conventional W/H and J/B couple. Another advantage of this approach lies in the distributed control itself, which gives better performance in hard real-time computing than centralized one, and in the ability of integrating different modules through CAN.

• Research in Community and Public Health Nursing
• /
• v.21 no.1
• /
• pp.31-42
• /
• 2010

Purpose: The aims of this study were to identify successful strategies and propose a community-based participatory global health project model for primary health care capacity development. Methods: The study used case study methodology. A The unit of analysis was an international cooperation health project entitled "Community-based Primary Health Care Improvement in San Lorenzo, Ecuador" using community-based participatory research conducted in 2007~2008. Data were collected through windshield surveys, focus group discussion, key informant interviews, and provider surveys. Results: Identified successful strategies for the international cooperation health project were reciprocal partnership between researchers and community, partners' capacity building, south-to-south cooperation, and continuous monitoring and feedback. Community participation was found to be an essential tenet to guarantee the improvement of primary health care in the underserved rural community. Evidence from the activities of community health practitioners in Korea was applicable to the development of training programs for primary health care providers in Ecuador. Conclusion: Strategies for strengthening primary health capacity may be tailored depending on socio-cultural, political, and economical situations of each country. The model, however, would be applicable to the entire process of community-based global health projects in underserved rural communities of other countries.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.1
• /
• pp.26-33
• /
• 2009

The directions of the road are divided into two, the right-hand side and left-hand side of the road, by the convention and specific native method in the world. This paper deals with the characteristics and behaviors of drivers who are accustomed to driving on right-hand side of the road, drive with a handle on the left-hand side, and comparing with left-hand side drivers. The driver's eye movements were measured by eye camera and questionnaires were used for measuring subjective evaluation such as driving mental workload. The experimental results indicated even if the experts who had much experience on right-hand side driving, they had lower driving skill than novice driver, accustomed to driving on left-hand side. In terms of mental workload, MCH rating scale and MNASA-TLX, the right-hand side drivers were in lower stress condition than the left-hand side drivers because of having much driving experience. However, they conducted a few mistakes by confusing the position of turn signal and windshield wiper because of their driving habit or traits and it lead to operation mistakes. These results can be applied effectively to develop the driving support information with changed environments.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.3
• /
• pp.51-58
• /
• 2008

This paper is a study of a prevention of power folding controller's thermal degradation. Power folding technology has been applied for many fields such as side rear vision mirror of vehicles, windshield wiper, antenna, power window. These controllers have been comprised with traditional DC moors, Switching electronic devices, and relays. But this methods have a limitation to overcome such problems of product reliability, endurance, noise margins. Therefore on this paper, to detect the movement of motor, sensing motor brush noise on a load sensing part has been used and controlling a precise RC timing control minimizes the thermal deterioration of motor. And using MOS FETs as a electronic switching device increases life-time and liability of control circuit. After testing such circuit and control method, repetition of operating time, cut-off time, wide operation voltage, power noise margin ware increased over eleven-fold.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.114.2-114.2
• /
• 2017

Transparent film heaters (TFHs) based on Joule heating are currently an active research area. However, TFHs based on an indium tin oxide (ITO) monolayer have a number of problems. For example, heating is concentrated in part of the device. Also, heating efficiency is low because it has high sheet resistance ($R_S$). Resistance of indium zinc oxide (IZO) is similar to ITO and it can be used to flexible applications due to its amorphous structure. To solve these problems, our study introduced hybrid layers of IZO/Ag/IZO deposited by magnetron sputtering, and the electrical, optical, and thermal properties were estimated for various thickness of the metal interlayer. It was found that the sheet resistance of the multilayer was mainly dependent on the thickness of the Ag layers. The $R_S$ of IZO(40)/Ag/IZO(40nm) multilayer was 5.33, 3.29, $2.15{\Omega}/{\Box}$ for Ag thickness of 10, 15, and 20nm, respectively, while the $R_S$ of an IZO monolayer(95nm) was $59.58{\Omega}/{\Box}$. The optical transmittance at 550nm for the IZO(95nm) monolayer is 81.6%, and for the IZO(40)/Ag/IZO(40nm) multilayers with Ag thickness 10, 15 and 20nm, is for 72.8, 78.6, and 63.9%, respectively. The defrost test showed that the film with the lowest RS had the highest heat generation rate (HGR) for the same applied voltage. The results indicated that IZO(40)/Ag(15)/IZO(40nm) multilayer has the best suitable property, which is a promising thin film heater for the application in vehicle windshield.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.4
• /
• pp.179-190
• /
• 2012

During recent few years, Bike is arising as one of the most important item of sports market. As well as in domestic markets, customers are demanding specific brands only for young aged riders. Therefore, this study researched current bike wears and suggest digital textile printing with sports wear trends which also have safety and visual impact effectiveness, so it can be satisfied as green products and we also try to suggest sports sensitivity of existing cycle wear to city fashion. The purpose of this study is to figure out 20's-30's female biker attitude for bike wear and their purchasing habits and also their preference, digital textile design of city biker wear based on present condition research of riding wear markets and to establish high quality products with occupying high percentage of global markets and making high profits. For this study, bike wear distributors Survey First, foreign companies generally meet evenly sampling the 20s and 30s targeted vendors 10 companies were selected. 'city sporty ware' or 'casual line' dual 'extreme line' from all manufacturers, including, however did not distinguish it from all the vendors. This higher proportion of the recent upsurge in public and non-professional riders, despite the fact that you can see that the lack of 'Extreme line' compared to the 'casual' line of the city sporty ware production. overall seasonal sales in the spring appeared windbreak jacket, leggings and sweat emissions and at the same time built into the fabric dry faster T-shirt and shorts in the summer sales were higher. autumn jacket and produced excellent warm in winter fleece fabric T-shirts, pants, windshield jacket higher sales. showed improvements in design, improved in the order of the highest and perfect for everyday wear for both. As mentioned, we figure out 20's-30's female rider's attitude for riding suit and their purchasing habits and also their preference, so we can develop riding suit design based on their needs and suggest new design patterns.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.2628-2634
• /
• 2014

Vehicle washer heater system is more widely adopted to defrost a window or to clear the windshield glass in winter season. The washer heater system should be designed to heat up washer fluid rapidly to the target temperature for only a short time. A numerical analysis has been carried out to analyze the heat transfer characteristics with materials of inside parts in vehicle washer heater system with filler and flow path. ANSYS - FLUENT software is employed for the analysis. The axial symmetry model is three-dimensional and unsteady. It applies to the coupled method which is one of pressure based. Through this result, it was obtained to find the optimal material condition for the filler and flow path in washer system. For material of filler, the air with lower density was heated more rapidly rather than silicon carbide(SiC). For material of flow path, copper with the heat transfer coefficient of approximately four times greater than the nickel gives us higher efficiency. That is the reason why the heating time of methanol was reduced to make uniform temperature in washer heater system.