• 한국인쇄학회지
• /
• 제25권2호
• /
• pp.59-67
• /
• 2007

The working environment of DTP tends to increase from Macintosh to MS Windows in Korea because of being developed exclusively cross-platformed applications. Base of this change is not related to spread of using PDF. Recently, it's cause of falling into dilemma in Prepress. It's due that operators in Prepress don't have correctly understanding about differences and features between Postscript and PDF. This paper tried to search a way to solve problems via changing circumstance in operating Postscript and PDF.

• 한국산업융합학회 논문집
• /
• 제11권3호
• /
• pp.135-140
• /
• 2008

This paper researched about Development Cutting Tool User Defined Module Based(PMCUDMS) on Simulation that was able to adapt themselves to rapid development of software and hardware to adopt. It is basic research that develops a scheme whereby technic make property. This paper theorized about to realize Cutting Tool User Defined Module Based on Simulation which is developing CNC Software flows from building Windows XP operating system's image that is possible realtime acting and multitasking to correct. And Cutting Tool User Defined Module Based on Simulation component which was consisted of basis OS, NC Code parser, Servo Motor Control, Simulator, Man-Machine Interface.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.370-372
• /
• 2005

In this paper, the microcontroller TCP/IP NIE(Network Interface Equipment) which is exclusive of an operating system is implemented and the applied example to a step motor motion controller is then explained. The microcontroller TCP/IP NIE supplies a DHCP(Dynamic Host Configuration Protocol) as well as basic TCP/IP network protocols. So, the automatic setting up of the Dynamic If(Internet Protocol) is possible. To implement a control of a system with an internet, the microcontroller TCP/IP NIE is applied to a step motor motion controller and a step motor is then controlled with a Microsoft Windows-based Telnet application program.

• 한국가시화정보학회지
• /
• 제6권1호
• /
• pp.27-33
• /
• 2008

Air flow inside an automotive HVAC module has been investigated using a high-resolution PIV technique with varying the temperature operation mode. The PIV system consists of a 2-head Nd:YAG laser (125 mJ), a high-resolution CCD camera (2K$\times$2K), optics and a synchronizer. A real automotive HVAC module was used directly under real operating condition. Some casing parts of the HVAC module were replaced with transparent windows for capturing clear flow images with laser light sheet beam illumination. Time-averaged velocity fields were obtained for two different temperature control modes. Flow characteristics of the air-conditioned air flow inside the automotive HVAC system for the two temperature baffle conditions were evaluated.

• 스마트미디어저널
• /
• 제4권2호
• /
• pp.34-45
• /
• 2015

윈도우는 국내에서 가장 많이 사용되는 운영체제이기 때문에 윈도우용 소프트웨어를 대상으로 불법 복제가 많이 이루어지고 있고 불법 복제로 인해 소프트웨어 저작권이 침해될 수 있다. 이를 보호하기 위해서 저작권 보호 방법 중 하나인 소프트웨어 버스마크를 사용한다. 소프트웨어 버스마크는 소프트웨어로부터 특정 정보들을 추출하여 소프트웨어간 도용 여부를 판별할 수 있는 기술이며 대상 소프트웨어로 부터 특정 정보를 추출하는 방법에 따라 정적 버스마크와 동적 버스마크로 구별된다. 정적 버스마크와 동적 버스마크는 서로 장단점을 가지고 있지만 본 논문에서는 API 기반 동적 버스마크를 이용한 유사도 측정 기법을 제안하고, 동적 버스마크의 추출 과정을 설명한다. 또한 실험을 통해 제안하는 동적 버스마크의 유사도 측정 기법이 신뢰성과 강인성을 만족하는 것을 확인할 수 있었으며 기존 동적 버스마크의 유사도 측정 기법보다 제안하는 동적 버스마크의 성능이 향상 된 것을 확인할 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.865-870
• /
• 2003

A motion controller has been used variously in industry such as semiconductor manufacture equipment, industrial robot, assembly/conveyor line applications and CNC equipment. There are several types of controller in motion control. One of these is a PC-based motion controller such as PCI or ISA, and another is stand-alone motion controller. The PC bus-based motion controller is popular because of improving bus architectures and GUI (Graphic User Interface) that offer convenience of use to user. There are some problems in this. The PC bus-based solution allows for only one of the form factors, so it has a poor flexibility. The overall system package size is bigger than other motion control system. And also, additional axes of control require additional slot, however the number of slots is limited. Furthermore, unwieldy and many wirings come to connect plants or I/O. The stand-alone motion controller has also this limit of axes of control and wiring problems. To resolve these problems, controller must have capability of operating as stand-alone devices that resides outside the computer and it needs network capability to communicate to each motion device. In this paper, a network-based stand-alone motion system is proposed. This system integrates PC and motion controller into one stand-alone motion system, and uses CAN (Controller Area Network) as network protocol. Single board computer that is type of 3.5" FDD form factor is used to reduce the system size and cost. It works with Windows XP Embedded as operating system. This motion system operates by itself or serves as master motion controller that communicates to slave motion controller. The Slave motion controllers can easily connect to master motion system through CAN-network.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.369-372
• /
• 2002

In this research, a vision system for detecting tool breakage which is hardly detected by such indirect in-process measurement method as acoustic emission, cutting torque and motor current was developed and embedded into a PC-NC system. The vision system consists of CMOS image sensors, a slit beam laser generator and an image grabber board. Slit beam laser was emitted on the tool surface to separate the tool geometry well from the various obstacles surrounding the tool. An image of tool is captured through two steps of signal processing, that is, median filtering and thresholding and then the tool is estimated normal or broken by use of change of the centroid of the captured image. An air curtain made by the jetting high-pressure air in front of the lens was devised to prevent the vision system from being contaminated by scattered coolant, cutting chips in cutting process. To embed the vision system to a Siemens PC-NC controller 840D NC, an HMI(Human Machine Interface) program was developed under the Windows 95 operating system of MMC103. The developed HMI is placed in a sub window of the main window of 840D and this program can be activated or deactivated either by a soft key on the operating panel or M codes in the NC part program. As the tool breakage is detected, the HMI program emit a command for automatic tool change or send alarm to the NC kernel. Evaluation test in a high speed tapping center showed the developed system was successful in detection of the small-radius tool breakage.

• 한국산업융합학회 논문집
• /
• 제7권2호
• /
• pp.199-205
• /
• 2004

This paper describes the fault diagnosis method to order to construct CIM in complex system with hierarchical structure similar to human body structure. Complex system is divided into unit, item and component. For diagnosing this hierarchical complex system, it is necessary to implement a special neural network. Fault diagnosis system can forecast faults in a system and decide from the signal information of current machine state. Comparing with other diagnosis system for a single fault, the developed system deals with multiple fault diagnosis, comprising hierarchical neural network (HNN). HNN consists of four level neural network, i.e. first is fault symptom classification and second fault diagnosis for item, third is symptom classification and forth fault diagnosis for component. UNIX IPC is used for implementing HNN with multitasking and message transfer between processes in SUN workstation with X-Windows (Motif). We tested HNN at four units, seven items per unit, seven components per item in a complex system. Each one neural network represents a separate process in UNIX operating system, information exchanging and cooperating between each neural network was done by message queue.

• 인터넷정보학회논문지
• /
• 제21권1호
• /
• pp.45-55
• /
• 2020

정보 통신 기술의 발달로 인해 매년 신종/변종 악성코드가 급격히 증가하고 있으며 최근 사물 인터넷과 클라우드 컴퓨팅 기술의 발전으로 다양한 형태의 악성코드가 확산되고 있는 추세이다. 본 논문에서는 운영체제 환경에 관계없이 활용 가능하며 악성행위와 관련된 라이브러리 호출 정보를 나타내는 문자열 정보를 기반으로 한 악성코드 분석 기법을 제안한다. 공격자는 기존 코드를 활용하거나 자동화된 제작 도구를 사용하여 악성코드를 손쉽게 제작할 수 있으며 생성된 악성코드는 기존 악성코드와 유사한 방식으로 동작하게 된다. 악성 코드에서 추출 할 수 있는 대부분의 문자열은 악성 동작과 밀접한 관련이 있는 정보로 구성되어 있기 때문에 텍스트 마이닝 기반 방식을 활용하여 데이터 특징에 가중치를 부여해 악성코드 분석을 위한 효과적인 Feature로 가공한다. 가공된 데이터를 기반으로 악성여부 탐지와 악성 그룹분류에 대한 실험을 수행하기 위해 다양한 Machine Learning 알고리즘을 이용해 모델을 구축한다. 데이터는 Windows 및 Linux 운영체제에 사용되는 파일 모두에 대해 비교 및 검증하였으며 악성탐지에서는 약93.5%의 정확도와 그룹분류에서는 약 90%의 정확도를 도출하였다. 제안된 기법은 악성 그룹을 분류시 각 그룹에 대한 모델을 구축할 필요가 없기 때문에 단일 모델로서 비교적 간단하고 빠르며 운영체제와 독립적이므로 광범위한 응용 분야를 가진다. 또한 문자열 정보는 정적분석을 통해 추출되므로 코드를 직접 실행하는 분석 방법에 비해 신속하게 처리가능하다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 추계학술대회
• /
• pp.304-306
• /
• 1996

Endoscopy has become a crucial diagnostic and theraputic procedure in clinical areas. Over the past three years, we have developed a computerized system to record and store clinical data pertaining to endoscopic surgery of laparascopic cholesystectomy, peviscopic endometriosis, and surgical arthroscopy. In this study, we are developed computer system, which is composed of frame grabber, sound board, VCR control board, LAN card and EDMS(endoscopic data management software). Also, computer system has controled over peripheral instruments as a color video printer, video cassette recorder, and endoscopic input/output signals(image and doctor's speech). Also, we are developed one body system of camels control unit including an endoscopic miniature camera and light source. Our system offer unsurpassed image quality in terms of resolution and color fidelity. Digital endoscopic data management system is based on open architecture and a set of widely available industry standards, namely: windows 3.1 as a operating system, TCP/IP as a network protocol and a time sequence based database that handles both an image and drctor's speech synchronized with endoscopic image.