• KIEAE Journal
• /
• v.10 no.5
• /
• pp.3-12
• /
• 2010

Sustainable design is getting to be controversial issue in all industries over the world particularly, in architecture as the amount of energy usage in architecture occupies 40%. Therefore, it is essential to make the standard for the sustainable design. In order to construct the sustainable design, firstly it should be considered that sustainable design elements based on natural resources to increase building energy efficiency is established and classified. The method of sustainable design divides into passive design and active design. Passive design method should be examined with active one simultaneously for more efficient usage of energy. Next, the study is followed how the sustainable design elements is adopted in buildings through the comparison of cases study of domestic and oversea. The result of case study shows similar adoption of sustainable design elements between oversea and domestic. However, the difference is shown in the building orientation and shape and the window size and position in Solar energy as well as high performance structure in Heat energy. These elements are the most significant elements in order to reduce energy load. In oversea, sustainable design is generated by architects, a client, and consultants based on the close cooperation in the beginning of early design phase before deciding building shape and envelope while in the domestic field adoption for sustainable design is conducted after deciding building shape and material. In order to design sustainable architecture more study is necessary in early stage for Zero Carbon and reducing building energy load through relation with specialists, a client and architects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.613-619
• /
• 2003

Bluetooth is a communication technology enabling short-range devices to be wirelessly connected. A master and one or more slave devices are connected to form a piconet, and piconets are joined to form a scatternet. The units participating in two or more piconets in a scatternet, is called bridge or gateway nodes. In order to operate the scatternet efficiently, both piconet scheduling for the master and slaves of a piconet, and scatternet scheduling for the bridge nodes are playing important roles. In this paper, we propose a traffic-adaptive dynamic scatternet scheduling algorithm based on rendezvous points and rendezvous windows. The performance of the proposed algorithm is compared and analyzed with that of a static scheduling algorithm via simulations. Simulation results show that our algorithm can distribute wireless resources efficiently to bridge nodes depending on the traffic characteristics.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11C
• /
• pp.940-947
• /
• 2010

Motion Compensated Frame Interpolation(MCFI) has been used to reduce motion jerkiness for dynamic scenes and motion blurriness for LCD-panel display as post processing for high quality display. However, MCFI that directly uses the motion information often suffers from annoying artifacts such as blockiness, ghost effects, and deformed structures. So in this paper, we propose a novel edge-based adaptively weighted vector median filter as post-processing. At first, the proposed method generates an edge direction map through a sobel mask and a weighted maximum frequent filter. And then, outlier MVs are removed by average of angle difference and replaced by a median MV of $3{\times}3$ window. Finally, weighted vector median filter adjusts the weighting values based on edge direction derived from spatial coherence between the edge direction continuity and motion vector. The results show that the performance of PSNR and SSIM are higher up to 0.5 ~ 1 dB and 0.4 ~ 0.8 %, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.10 s.89
• /
• pp.952-960
• /
• 2004

PSK(Phase Shift Keying) is useful because of the power and spectral efficient modulation. In this paper, no additional hardware will be needed to support various transmit mode in the suggested DSP scheme. We design and implement the synchronization algorithm for M-ary PSK(M=2, 4) demodulator based on DSP scheme, instead of complex analog PSK demodulator. TMS320C6203 is used as DSP. We check the all kinds of waveforms via the graph view window after software programming the emulation on the DSP tool. The result of implementation proves that demodulator using the suggested algorithm has equal performance with demodulator using analog circuits.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.485-492
• /
• 2010

In this paper, we propose a focusable table component for mobile application to support table form representation of various contents and manipulation such as focusing on the contents using the WFC which is a software module to support components of the window based GUI package. It is not easy for us to express contents with table attributes on mobile devices. Java provides several table components, but these are not suitable on the mobile environment. So we design and develop the extended table component to provide properly table form representation and manipulation on the mobile devices. Also, we provide a performance comparison between th supposed table component and Java Swing's JTable.

• Current Photovoltaic Research
• /
• v.3 no.1
• /
• pp.21-26
• /
• 2015

High efficiency $Cu(In,Ga)Se_2$ solar cells are generally prepared above $500^{\circ}C$. Lowering the process temperature can allow wider selection of substrate material and process window. In this paper, the three-stage co-evaporation process widely used to grow CIGS thin film at high temperature was modified to reduce the maximum substrate temperature. Below $400^{\circ}C$ the CIGS films show poor crystal growth and lower solar cell performance, in spite of external Na doping by NaF. As a new approach, Cu source instead of Cu with Se in the second stage was applied on the $(In,Ga)_2Se_3$ precursor at $400^{\circ}C$ and achieved a better crystal growth. The distribution of Ga in the films produce by new method were investigated and solar cells were fabricated using these films.

• Journal of Energy Engineering
• /
• v.26 no.1
• /
• pp.34-44
• /
• 2017

This paper deals with the effectiveness of a fiber optic solar lighting system that uses a Fresnel lens mounted on a two-axis solar tracker. A series of comparative analyses were made concerning its performance as compared to fluorescent lighting by using a simulation model based on ECOTECT and RADIANCE as well as referring to actual data. ECOTECT was used to model the test room (space) while RADIANCE was used for its indoor lighting conditions (environment). It was found that the average indoor light levels of fluorescent lighting fully satisfy the KS standard (KS A 3011, general office, class [G]: 300-400-600lux) whereas those of the solar lighting with light diffusers depends on the occlusion factor of roller shades installed on the south window.

• Journal of KIISE:Databases
• /
• v.32 no.1
• /
• pp.43-55
• /
• 2005

Spatiotemporal databases support methods of recording and querying for spatiotemporal data to user by offering both spatial management and historical information on various types of objects in the real world. We can answer to the following query in real world: 'What is the average of volume of pesticide sprayed for cach farm land from April to August on 2001, within some query window' Such aggregation queries have both temporal and spatial constraint. However, previous works for aggregation are attached only to temporal aggregation or spatial aggregation. So they have problems that are difficult to apply for spatiotemporal data directly which have both spatial and temporal constraint. Therefore, in this paper, we propose spatiotemporal aggregate functions for analysis of spatiotemporal data which have spatiotemporal characteristic, such as stCOUNT, stSUM, stAVG, stMAX, stMIN. We also show that our proposal resulted in the convenience and improvement of query in application systems, and facility of analysis on spatiotemporal data which the previous temporal or spatial aggregate functions are not able to analyze, by applying to the estate management system. Then, we show the validity of our algorithm performance through the evaluation of spatiotemporal aggregate functions.

• Journal of KIISE:Software and Applications
• /
• v.31 no.2
• /
• pp.213-223
• /
• 2004

In this paper, we propose a new face detection method for real-time applications. It is based on the template-matching and appearance-based method. At first, we apply Min-max normalization with histogram equalization to the input image according to the variation of intensity. By applying the PCA transform to both the input image and template, PC components are obtained and they are applied to the LDA transform. Then, we estimate the distances between the input image and template, and we select one region which has the smallest distance. SVM is used for final decision whether the candidate face region is a real face or not. Since we detect a face region not the full region but within the $\pm$12 search window, our method shows a good speed and detection rate. Through the experiments with 6 category input videos, our algorithm shows the better performance than the existing methods that use only the PCA transform. and the PCA and LDA transform.

• The KIPS Transactions:PartA
• /
• v.9A no.1
• /
• pp.29-36
• /
• 2002

For the efficient collaboration awareness, the CSCW (Computer-Supported Cooperative Work) systems provide functions such as telepointing, snap-shot, and document/project tracking. Among these, telepointing allows an event occurrence on the shared window of a local computing system to be presented in remote computing systems. Although telepointing has been mentioned in the literature, few research papers deal with the functional requirements and protocols for telepointing. This parer describes the functional requirements and payload format for RTP (Real-Time Transport Protocol)-based telepointing. In order to evaluate the performance of the proposed RTP-barred telepointing, we have implemented a whiteboard and compared it with that of the Microsoft Netmeeting. The evaluation results show that the proposed telepointing performs better in terms of CPU usage and the amount of network traffic.