• 한국결정학회지
• /
• 제8권2호
• /
• pp.105-110
• /
• 1997

CdS/CuInSe2 태양전지에서 창측재료로 1μm 두께의 CdS박막을 1x10-3mTorr의 진공하에서 CdS source 온도를 800-1100'C로 하고 기판의 온도를 50-200℃로하여 진공증차겁으로 제조하였다. 증착된 CdS박막의 구조적, 전기적, 광학적 특성조사는 x-ray diffractometer(XRD), scanning electron microscope(SEM), 전기비저항 측정, Hall measurement 그리고 optical transmission spectra로 행하였고, 각막들의 성분분석은 energy dispersive analysis of X-ray (EDAX)를 가하나, 광투과도는 감소하였다. 이때 증착된 CdS 박막들은 모두 hexagonal 구조를 가지고 있었으며, 결정성은 기판유리를 딸 (002)면으로 형성되었다. CdS Source 온도가 1000℃에서 증착된 CdS 박막이 0.9(S/cm)의 가장 높은 전기 전도도를 나타내었다. 또한 기판온도를 100'C로 제조한 CdS 박막이 전기비저항은 40(Ω,cm)이었고 광투과도는 80% 이상의 값을 나타내어 CdS/CuInSe2 태양전지의 창측재료로 적합했다.

• 전기학회논문지
• /
• 제58권7호
• /
• pp.1450-1455
• /
• 2009

Assumed that an IPTV camera system is to be used as an ad-hoc sensor for the surveillance and diagnostics of safety-critical equipments installed in the in-containment building of the nuclear power plant, an major problem is the presence of high dose-rate gamma irradiation fields inside the one. In order to uses an IPTV camera in such intense gamma radiation environment of the in-containment building, the radiation-weakened devices including a CCD imaging sensor, FPGA, ASIC and microprocessors are to be properly shielded from high dose-rate gamma radiation using the high-density material, lead or tungsten. But the passive elements such as mirror, lens and window, which are placed in the optical path of the CCD imaging sensor, are exposed to a high dose-rate gamma ray source directly. So, the gamma-ray irradiation characteristics of the passive elements, is needed to test. A CCD camera lens, made of glass material, have been gamma irradiated at the dose rate of 4.2 kGy/h during an hour up to a total dose of 4 kGy. The radiation induced color-center in the glass lens is observed. The degradation performance of the gamma irradiated lens is explained using an color component analysis.

• 제어로봇시스템학회논문지
• /
• 제18권5호
• /
• pp.445-452
• /
• 2012

With the increasing number of high-rise and large-scale buildings, modern buildings are becoming intelligent, and are incurring high construction costs and requiring careful maintenance. Maintenance works for high-rise buildings significantly depend on human labor, unlike other construction processes that are gradually being automated. The resulting accidents may produce very high social and economic losses. To address this problem, herein, this paper proposes robotic building maintenance system using multi-robot concept, in specific, cleaning a building facade which is directly subjected to minimize human labor; that improves the process efficiency and economic feasibility. The sensor for detecting contamination of building's outer-wall glass is proposed; Kalman filter was used for estimating robots' status with the contamination of the window glass. Task allocation of the sensor based multi-robots for an effective way of task execution is introduced and the feasibility was verified through the simulations.

• 한국태양에너지학회 논문집
• /
• 제32권4호
• /
• pp.51-58
• /
• 2012

This study aims to analyze characteristics of Cell surface temperature and generated power performance for improving PV(Photovoltaic) system condition according to the cell opening ratio of transparent crystal PV system at Spandrel of curtain-wall. For this purpose, alternatives were classified for eight different cases that opening ratio of transparent crystal PV system varied from 0% to 70%, which was used by simulation tool, EnergyPlus. As results, it turned out that increasing opening ratio of transparent crystal PV system led higher PV surface temperature, back-sheet type was thus the most advantageous for decreasing surface temperature, annual generating efficiency, and annual accumulated generating power. Consequently, blocking off air space from outside insolation can advantageously keep to be better condition for generated power performance.

• 건축역사연구
• /
• 제1권1호
• /
• pp.117-128
• /
• 1992

The purpose of this paper is to clarify the introduction of foreigner's architectural engineering such as building materials techniques engineers, focused on the Late Yi-dynasty. Such all kind of building materials as timber brick tile cement lime glass window furniture and so on was imported from the foreign company in opening period of ports in Cho-son. The timer of these materials was imported from Japan, the brick tile from China, and others directly from Western counteries indirectly from Japan China. As it was active in an inflow of building materials and machines about 1890's, the modern building techniques were introduced and elementarily mastered such as timber sewing, manufacturing baking of brick glass, and masonry, The above modern techniques became the direct background in the formation of Korean modern architecture. Building engineers can be divided into three classes : architect engineer apprentice. But It could be apparently not divided the relation between architect and engineer at that time. They could be classified into job-architects who were engaged by the Korean government and leaded an active life in their settlement, and missonaries, They introduced the construction and style of modern architecture in our country, And so many skilled laborers and laborers participated in the construction of their settlement.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.222-224
• /
• 2006

A non-vacuum process for $Cu(In,Ga)Se_2$ (CIGS) thin film solar cells from nanoparticle precursors was described in this work CIGS nanoparticle precursors was prepared by a low temperature colloidal route by reacting the starting materials $(CuI,\;InI_3,\;GaI_3\;and\;Na_2Se)$ in organic solvents, by which fine CIGS nanoparticles of about 20nm in diameter were obtained. The nanoparticle precursors were mixed with organic binder material for the rheology of the mixture to be adjusted for the doctor blade method. After depositing the mixture of CIGS with binder on Mo/glass substrate, the samples were preheated on the hot plate in air to evaporate remaining solvents ud to burn the organic binder material. Subsequently, the resultant (porous) CIGS/Mo/glass simple was selenized in a two-zone Rapid Thermal Process (RTP) furnace in order to get a solar ceil applicable dense CIGS absorber layer. Complete solar cell structure was obtained by depositing. The other layers including CdS buffer layer, ZnO window layer and Al electrodes by conventional methods. The resultant solar cell showed a conversion efficiency of 0.5%.

• KIEAE Journal
• /
• 제16권3호
• /
• pp.121-128
• /
• 2016

Purpose: The vacuum glazing should constantly retain the gap in vacuum state to maintain high thermal performance. To do so, pillars are used to prevent the glazing from clinging to each other by the atmospheric pressure and therefore surface of the vacuum glazing is consistently affected by residual stress. The vacuum glazing could be applied to curtain wall systems at spandrel area to fulfill a rigorous domestic standard on U-value of the external wall. However, this can lead to high glazing temperature increase by heat concentration at a back panel and finally thermal stress breakage. This study experimentally determined weakness of the vacuum glazing systems on the thermal stress breakage and investigated effect of the residual stress. Method: The experiment first built two scale-down mock-up facilities that replicate the spandrel area in curtain wall, and then installed single low-e glass and vacuum glazing respectively. The two mock-up facilities were exposed to outside to induce the thermal stress breakage. Result: The experiment showed that the temperature occurred the thermal stress breakage was $114.4^{\circ}C$ for the single low-e glass and $118.9^{\circ}C$ for the vacuum glazing respectively. The result also showed the vacuum glazing reached the critical point earlier than the single low-e glass, which means that the vacuum glazing has high potential to occur the thermal shock breakage. In addition, the small temperature difference between two glazing indicates that the residual stress scarcely affects breakage of the vacuum glazing.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.36.1-36.1
• /
• 2010

While the substrate-type solar cells with Cu(In,Ga)Se2 absorbers yield conversion efficiencies of up 20%[1], the highest published efficiency of Cu(In,Ga)Se2 superstrate solar cell is only 12.8% [2]. The commerciallized Cu(In,Ga)Se2 solar cells are made in the substrate configuration having the stacking sequence of substrate (soda lime glass)/back contact (molybdenum)/absorber layer (Cu(In,Ga)Se2)/buffer layer (cadmium sulfide)/window layer (transparent conductive oxide)/anti reflection layer (MgF2) /grid contact. Thus, it is not possible to illuminate the substrate-type cell through the glass substrate. Rather, it is necessary to illuminate from the opposite side which requires an elaborate transparent encapsulation. In contrast to that, the configuration of superstrate solar cell allows the illumination through the glass substrate. This saves the expensive transparent encapsulation. Usually, the high quality Cu(In,Ga)Se2 absorber requires a high deposition temperature over 550C. Therefore, the front contact should be thermally stable in the temperature range to realize a successful superstrate-type solar cell. In this study, it was tried to make a decent superstrate-type solar cell with the thermally stable ZnO:Al layer obtained by adjusting its deposition parameters in magnetron sputtering process. The effect of deposition condition of the layer on the cell performance will be discussed together with hall measurement results and current-voltage characteristics of the cells.

• 한국전자파학회논문지
• /
• 제22권2호
• /
• pp.140-147
• /
• 2011

본 논문에서는 차량 후면 유리에 여러 주파수 대역의 안테나를 집적화할 수 있는 유리접지를 이용한 안테나 급전 방법을 제안하였다. 유리접지가 가능하도록 동축 선로를 유리접지면에 직접 연결할 수 있는 어댑터를 설계하였으며, 차체 접지 방식과 반사 손실을 비교 분석하였다. Azimuth 방향에서 높은 복사 이득을 얻기 위해 유리 접지의 크기와 위치를 최적화 하였으며, 도출된 유리접지면을 이용하여 삼각 패치 형상의 WiBro 안테나를 상용세단의 후면 유리에 인쇄하고 반사 손실과 복사 패턴 성능을 측정하였다. 제안된 유리접지를 이용한 급전 방식은 차체 접지를 이용한 급전 방식과 유사한 반사 손실을 보이며, 2 dB 높은 azimuth 복사 이득이 나타내었다. 측정 결과, 제안된 유리접지면을 이용한 안테나 급전 방식을 이용하면 여러 주파수에서 동작하는 다양한 형태의 온-글래스 안테나를 후면 유리에 효과적으로 적용할 수 있음을 확인하였다.

• 대한치과보철학회지
• /
• 제43권4호
• /
• pp.438-452
• /
• 2005

Statement of problem: The use of Ceromer is increasing in dentistry. But, the research of Ceromer has not been conducted much. Purpose : This study was to evaluate the marginal fidelity and internal adaptation according to marginal position. Materials and Methods: In this study 60 resin crowns were fabricated. The measurements of the marginal fidelity were carried out using stereomicroscope $SZ-40^{(R)}$ (Olympus, Japan) and the measurements of fracture strength were done using Instron $8871^{(R)}$ (Instron Co., U.S.A.) at a cross head speed of 1mm/min. All of the measurements were statistically analyzed by ANOVA test, multiple range test and Weibull analysis. Statistical significance was set in advance at the probability level of less than 0.05. All of the measurements were analyzed with Window $SPSS^{(R)}$ Version 10.0 soft ware for the personal computer. Results : 1. There were no statistical differences of the marginal fidelity between $Targis^{(R)}$ and $Tescera^{(R)}$, but difference between these two and $BelleGlass^{(R)}$ according to materials. 2. There were no statistical differences of the marginal fidelity between no fiber group and fiber group. There were no interactions between each maerial and with/without fiber group in the marginal fidelity 3. There were statistical differences of the fracture strength between $Tescera^{(R)}$ and $BelleGlass^{(R)}$ but no statistical differences of the fracture strength between $Targis^{(R)}$ and $Tescera^{(R)}$, $Targis^{(R)}$ and $BelleGlass^{(R)}$ according to materials. 4 There were statistical differences of the fracture strength between no fiber group and fiber group. There were no interactions between each material and with/without fiber group in the fracture strength. 5. When comparing the fracture surface, no fiber group showed the resin which were fractured at the labial surface and separated from the adhesion surface. In fiber group, the fractures took a place in resin compartments. Conclusion. The marginal fidelity and the fracture strength were clinically acceptable. From these results, $Targis^{(R)}$ and $Tescera^{(R)}$ were superior than $BelleGlass^{(R)}$ in the marginal fidelity But, when applying these resin crowns in clinic, more careful consideration is needed and further study is recommended.