• 대한의용생체공학회:의공학회지
• /
• 제34권4호
• /
• pp.189-196
• /
• 2013

Dielectrophoresis(DEP) is useful in manipulation and separation of micro-sized particles including biological samples such as bacteria, blood cells, and cancer cells in a micro-fluidic device. Especially, those separation and manipulation techniques using DEP in combination of micro fabrication technique have been researched more and more. Recently, it is revealed that a window structure of insulating layer in microfluidic DEP chip is key role in trap of micro-particles around the window structure. However, the trap phenomenon-driven by DEP force gradient did not fully understand and is still illusive. In this study, we characterize the trap mechanism and efficiency with different shapes of window in a microfluidic DEP chip. To do this characterization, we fabricated 4 different windows shapes such as rhombus, circle, squares, and hexagon inside a micro-fluidic chip, and performed micro-sized particles manipulation experiments as varying the frequency and voltage of AC signal. Moreover, the numerical simulation with the same parameters that were used in the experiment was also performed in order to compare the simulation results and the experimental results. Those comparison shows that both results are closely matched. This study may be helpful in design and development of microfluidic DEP chip for trapping micro-scaled biological particle.

• 대한물리치료과학회지
• /
• 제7권2호
• /
• pp.579-595
• /
• 2000

The purposes of this study were to compare pelvic tilt before and after manipulation of sacroiliac joint in 31 low back pain patients (11 males, 20 females) with sacroiliac joint dysfunction. The sacroiliac joint of patients was manipulated on the side of anterior pelvic tilt, using the technique described by Stoddard (1962) and Greenmann (1996). I used this technique because it usually eliminated sacroiliac joint dysfunction in one treatment session. SPSS for window computer system was used to analyze the data. Also t-test was performed for comparison of pelvic tilt angle before and after manipulation, and Pearson product-moment correlation analysis was performed for intratester reliability for measurements of pelvic tilt angle before and after manipulation. The result were as follows: 1. Intratester reliability was good for measures of pelvic tilt (r=.98). 2. The pelvic tilt after manipulation was significantly decreased (mean=$3.40^{\circ}$) compared with the pelvic tilt before manipulation (p=.001). All subjects showed asymmetrical right versus left pelvic tilt before manipulation. 40% of subjects showed decreased asymmetrical right versus left pelvic tilt after manipulation, and 60% of subjects showed symmetrical right versus left pelvic tilt after manipulation. I think that pelvic tilt asymmetry with hypomobility due to loss of joint play could be symmetrized by manipulation or mobilization, but pelvic tilt asymmetry with unilateral pelvic muscle shortening could not be symmetrized by manipulation or mobilization without relaxation and stretching of shortened muscles.

• 대한물리치료과학회지
• /
• 제8권1호
• /
• pp.893-906
• /
• 2001

The purposes of this study were to compare pelvic tilt. range of motion(ROM) of hip rotation, and leg length difference before and after manipulation and to investigate correlation between changes of each variables after manipulation of sacroiliac pint in 31 low back pain patients(11 males, 20 females) with sacroiliac pint dysfunction. The sacroiliac pint of patients was manipulated on the side of anterior pelvic tilt, using the technique described by Stoddard(1962) and Greenmann (1996). I used this technique because it usually eliminated sacroiliac Pint dysfunction in one treatment session. SPSS for window computer system was used to analyze the data. Also t-test was performed for comparison of the variables before and after manipulation, and Pearson product-moment correlation analysis and regression analysis were performed for changes of each variables after manipulation. The result were as follows: 1. The pelvic tilt after manipulation was significantly decreased(mean=$2.79^{\circ}$) compared with the pelvic tilt before manipulation(p=.001). 2. The PROM of hip internal rotation ipsilateral to anterior pelvic tilt after manipulation significantly decreased (mean = $1.88^{\circ}$) compared with hip internal rotation before manipulation (p=.008). The PROM of hip internal rotation ipsilateral to posterior pelvic tilt after manipulation significantly increased(mean = $1.29^{\circ}$) compared with hip internal rotation before manipulation (p=.029). 3. The PROM of hip external rotation ipsilateral to anterior pelvic tilt after manipulation significantly increased(mean=$2.42^{\circ}$) compared with the hip external rotation before manipulation(p=$2.42^{\circ}$) compared with the hip external rotation ipsilateral to posterior pelvic tilt after manipulation significantly decreased(mean = $1.84^{\circ}$) compared with the hip external rotation before manipulation (p=.008). 4. Leg length difference after manipulation significantly decreased(mean=2.15 mm) compared with leg length difference before manipulation (p=.008). Regression analysis revealed that a fair correlation was found between change in leg length difference and change in anterior pelvic tilt after manipulation(p=.009). 5. Pearson product-moment correlation coefficient was used to assess differences of the variables after manipulation. A fair correlation was found between change in leg length difference and change in anterior pelvic tilt after manipulation(r=.462, p<.01). A fair correlation was found between change in anterior pelvic tilt and change in hip internal rotation ipsilateral to anterior pelvic tilt(r=.397, p<.05) and between change in anterior pelvic tilt and change in hip external rotation ipsilateral to anterior pelvic tilt(r=.516, p<.01). A fair correlation was found between change in posterior pelvic tilt and changes in hip internal rotation ipsilateral to posterior pelvic tilt (r=.441, p<.05) and between change in posterior pelvic tilt and change in hip external rotation ipsilateral to posterior pelvic tilt(r=.361, p<.05). A fair correlation was found between change in hip internal rotation ipsilateral to anterior pelvic tilt and change in hip external rotation ipsilateral to posterior pelvic tilt(r=.388, p<.05) and between change in hip internal rotation ipsilateral to posterior pelvic tilt and change in hip internal rotation ipsilateral to anterior pelvic tilt(r=.426. p<.05).

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제36권6호
• /
• pp.471-478
• /
• 2009

최근 다양한 3차원 콘텐츠 및 응용 프로그램의 개발되고, 컴퓨터 사용자 계층이 다양화됨으로 인하여 인터페이스에 대한 연구가 활발히 진행되고 있다. 본 연구는 사용자가 손을 이용하여 윈도우를 효율적으로 제어할 수 있도록 하는 것을 목적으로 한다. 기존 인터페이스에 관한 연구들은 고가의 장비를 사용하거나 복잡한 제스처 인식, 또는 부가적인 도구인 마커 등을 사용하는 문제가 있다. 이러한 단점을 개선하기 위하여 새로운 시각적 비접촉 인터페이스를 제안한다. 손을 사용하여 윈도우를 제어하기 위하여 HSV 색상공간을 이용하여 손 영역을 검출한다. 그리고 거리변환 행렬과 손 외곽선의 곡률을 이용하여 손의 중심과 손가락의 위치를 파악한다. 손의 중심과 손가락 위치를 이용하여 본 논문에서 제안하는 7가지의 제어 동작 중 사용자가 의도하는 동작을 파악하여 인터페이스로써 활용한다. 제안하는 인터페이스는 스테레오 카메라를 사용함으로써 사유자가 3차원 공간에서 거리감을 가지고 제어할 수 있도록 하였다. 그리고 간단한 손동작으로 제어하고자 하는 객체를 시각적으로 접촉할 수 있도록 함으로써 직관적인 제어가 가능하도록 하였다. 마지막으로 제안하는 인터페이스를 활용한 응용을 통해서 효율성을 확인한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.536-541
• /
• 2000

A low cost PC based simulator for excavator manipulation has been developed using virtual reality technology. The simulator consists of two joystick input devices, server and client PCs, an excavator kinematics module, and a graphic rendering program Open Inventor. In order to use two joysticks in the PC window environment multi-thread programing with network protocol TCP/IP has been used. To provide realistic view to the operator, CAD program Pro/Engineer and 3D modeller have been employed to create 3D part geometry of tile manipulator and virtual environmental geometries. Those geometries also have been transformed and imported to the Open Inventor. The Simulator developed is to be improved for more realistic excavator operational training.

• 전자공학회논문지B
• /
• 제31B권9호
• /
• pp.10-21
• /
• 1994

Query-by-Example(QBE) is high-level display-oriented databased manipulation language that provides a convenient and unified style for querying, updating, defining, and controling a relational database. QBE is relationally complete. However, lack of aubquery constructs limits th usability of QBE significantly. In particular, certain queries cannot be represented in one window. In this paper, we define a subquery box and extend QBE for subquery construction. The Extended QBE makes it possible to represent the queries that the QBE cannot do in one window, reducing the overhead and complexity of composing those queries. We also define the grammar of the Extended QBE and present the parsing techniques. Finally, we present an algorithm to transform the queries in Exteded QBE to those in SQL. The result of the transformation can be executed using dynamic SQL features of any SQL system. The proposed language has been implemented on OS/2 using the OS/2 EE Database Manager.

• 천문학논총
• /
• 제11권1호
• /
• pp.147-161
• /
• 1996

The development of universal CCD camera control software for all BOAO CCD camera systems is proposed. The new software, running under Sun SPARCstation and motif based X window system with SunOS 4.1.3 operating system, replaces existing control software based on NeXTstation color and NeXTstep 2.1 operating system which is no more produced now. Several new features of the new software is introduced, some of which are 1) the image contrast is enhanced by color manipulation and display, 2) image zooming and trimming, 3) any size of image can be displayed in the scrolled window, and 4) the offset between telescope pointing position and CCD center is easily calculated by alt-azi map. Along with the above new features, the new software has advantages including ease of maintenance and upgrading and elimination of risk caused by hardware damage. Since September 1, the software beta version is being used by observers and there is not seen severe problem regarding the software itself, but several requests to equip more features to the software will be mirrored to future release.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2008년도 학술대회 1부
• /
• pp.366-371
• /
• 2008

본 논문에서는 터치스크린이 장착된 윈도우 시스템에서 촉각 피드백을 사용해 윈도우 인터페이스와 상호작용하는 방법 및 체계를 제안한다. 사용자가 터치 스크린을 통해 윈도우 인터페이스와 상호작용할 때 발생하는 주요 이벤트는 윈도우 인터페이스 메시지 필터(Windows Interface Message Filter: WIMF)에 의해 감지되고, 촉각 정보 제공기(Haptic Information Provider: HIP)를 통해 적절한 촉각 정보로 변환되어 본 연구에서 제안한 스타일러스형 햅틱 인터페이스를 통해 사용자에게 촉각 자극을 전달한다. 본 연구에서는 윈도우 환경의 주요한 조작 방법인 버튼 클릭, 메뉴 선택 및 팝업, 창/아이콘 선택 및 끌어놓기(drag & drop), 스크롤에 대하여 촉각 피드백을 구현하였다. 피험자 실험결과 촉각 피드백은 상호작용하는 인터페이스 객체가 선택되었는지에 대한 사용자의 직관을 증대시켰으며, 인터페이스 객체의 위치 및 크기 조절 시 인터페이스의 정교한 조작을 도와 사용성을 증대시켰다.

• 한국보육지원학회지
• /
• 제15권6호
• /
• pp.139-167
• /
• 2019

Objective: This study aims to investigate the effects of a learning cycle model-based early childhood education program using physical motion on young children's scientific inquiry ability, scientific attitude, object manipulation ability and spatial ability. Methods: The subjects of this study were 60 five-year-old children who were attending K-G City Childcare Center. The SPSS Window 21.0 program and content analysis method were used, and post-validation Tukey was conducted to examine the differences between the one-way ANOVA and the group. Results: Activities using body movement were practiced systematically based on the circle learning. Children could revise their pre-concept and concept of error by interacting with other children, teachers and the environment. Furthermore, children were attaining new knowledge while they were doing body movement activities, assessing and applying them to actual activities. Conclusion/Implications: This study is investigated a cyclic learning-based early childhood science education program using physical motion, which has significance in systematic and practical early childhood centered education for young children.

• 전자공학회논문지T
• /
• 제36T권3호
• /
• pp.79-84
• /
• 1999

기존의 포트란-77로 작성된 EMTP(전자기 과도현상 해석 프로그램)는 폐쇄적인 구조로 되어 있을 뿐 아니라, 낮은 수준의 데이터 관리에서부터 실제적인 수치적 풀이에 이르기까지 그 기능을 만족하기 위하여 많은 양의 코드수를 사용하기 때문에, 수치적인 풀이의 프로그램화는 희석되어지고, 시각화는 거의 불가능하다. 그래서, 프로그램 모듈의 관리나 개발에 있어서 많은 어려움이 있다. 본 논문에서는 매트랩과 비주얼 C++을 사용하여 EMTP의 재개발을 위해 적합한 새로운 디자인 아이디어를 제안하고, 윈도우 환경에서 구동하는 새로운 EMTP 패키지의 개발을 제시한다. 이 패키지는 전기회로에서 과도현상의 해석을 위한 매트랩 계산 엔진과 그래픽 사용자 인터페이스 기능을 가진다.