• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.723-724
• /
• 2006

In this study, superconducting coil arrangements and cryostat concept design were conducted for the development of 13.2kV/630A bifilar winding type high temperature superconducting(HTS) fault current limiter(FCL) with YBCO coated conductor(CC) wire. The coil consists of several layers with unique non-inductive solenoid winding method. Six types of HTS coil arrangements were investigated for the optimal insulation design of HTS FCL. And, conceptual design of cryostat was conducted for the decrement of thermal invasion and the prevention of low voltage insulation breakdown in the LHe which is used as pressurization gas in sub-cooling condition of liquid nitrogen(LN2). As the results, it was found that the modified suspended type cryostat with horizontal coil arrangement is beneficial to the insulation design of 13.2kV level bifilar winding type HTS FCL.

• 한국재료학회지
• /
• 제7권8호
• /
• pp.650-653
• /
• 1997

In large generators in power plants, stator winding insulations is exposed to a combination of thermal, electrical, mechanical, environmental stresses in service. These combined stresses cause insulation aging which leads to final insulation breakdown. In order to identify the breakdown mechanism, the stator winding insulation materials which are composed of mica-epoxy is analyzed by the component of materials with EDS, SEM techniques. We concluded that the potassium ions of mica are replaced by hydrogen ions at boundary area of mica-epoxy and/or mica-mica. It is proposed that through these phenomena, the conductive layers of potassium ions enable high voltage fields of multiple stresses to create voids and microcracks.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1133-1135
• /
• 2004

Superconducting transmission power cable is one of interesting parts in power application using high temperature superconducting wire. One of important parameters in high-temperature superconducting (HTSC) cable design is transport current distribution because it is related with current transmission capacity and ac loss. In this paper, the transport current and magnetic field distributions at conducting layers were investigated through the analysis of the equivalent circuit for HTSC power cable with shield layer. The transport current distribution due to the pitch length and winding direction was improved in case of HTSC power cable with shield layer.

• 설비공학논문집
• /
• 제19권4호
• /
• pp.333-338
• /
• 2007

The object of this study is to find the optimal insulation design conditions of a HTS power cable cryostat. The optimum condition of a cable cryostat is obtained by varying types of MLIs, cable core weights, spacer diameters, winding pitches and MLI layer numbers. As the weight of cable core is increased, conduction heat transfer from surroundings to cable cryostat is increased. But as the spacer pitch is increased from 120 mm to 200 mm, the heat leak of cable cryostat remains almost constant. The optimal number of MLI layers is suggested. Double ply MLI is more effective than triple ply MLI and the insulation effect is best when the number of MLI layers is 36.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.166-169
• /
• 2001

22,000 Ton hydraulic press was developed using wire winding method. The hydraulic press consists of three piece of frame type. The outer layers of yoke-column frame and main cylinder linear were wound with piano wire(1mm${\times}$4mm) under controlled tension and the total length of wound wire was about 450Km. The developed hydraulic press is used for the forming of heat plate with ultra-large size. To obtain large force with relative small apparatus, high pressure of $1,500 Kgf/cm^2$ was supplied to main cylinder through pressure amplification by booster pump. Therefore sealing technique of main cylinder is so crucial that the seals were made of mitre ring type with super-elastic metal. The press total weight is about 150 tons, which is quite light and compact relative to that of conventional hydraulic press.

• 소성∙가공
• /
• 제28권4호
• /
• pp.203-211
• /
• 2019

In this study, the weight of type IV pressure vessel is optimized through the burst pressure condition using the finite element analysis (FEA) based on the genetic algorithm (GA). The optimization design variables include the thickness of composite layers and the winding angles. The optimized design variables are validated using the numerical simulations for the pressure vessel. Consequently, the weight is decreased by about 6.5% as compared to the previously reported results for Type III pressure vessel. Additionally, a method which reduces the entire optimization time is proposed. In the original method, the population size is constant across all generations. However, the proposed method could reduce the workload through the reduction of the population size by half for every 25 generations. Thus, the proposed method is observed to increase the weight by about 0.1%, however, the working time for the optimization could be decreased by about 46.5%.

• 한국가스학회지
• /
• 제15권1호
• /
• pp.30-34
• /
• 2011

본 논문은 104L의 저장용량과 70MPa의 사용압력을 갖는 수소연료탱크용 복합소재 압력용기에 관한 강도안전성을 해석한 평가연구이다. 탄소섬유 복합용기의 내측은 6061-T6의 알루미늄 라이너를 사용하고, 외경측은 원주방향을 따라서 탄소섬유 후프층을 형성하고, 또한 $12^{\circ}C$ 적층과 $70^{\circ}C$ 적층을 헤리컬방향으로 경사지게 감아서 제작하였다. 복합소재 연료탱크의 강도안전성에 대한 FEM 해석결과는 US DOT-CFFC와 KS B ISO 11119-2 규정에 따라 평가되었다. FEM 해석결과에 의하면, 104L의 복합용기로 제시된 설계모델을 US DOT-CFFC와 KS B ISO 11119-2 기준으로 평가할 때 모두 안전하다할 수 있다. 그렇지만, 탄소섬유 연료탱크에 대한 계산결과는 한국의 평가기준을 사용하기보다는 미국의 안전기준을 적용하는 것이 더 안전하다는 해석결과를 알 수 있다. 따라서 70MPa의 수소연료 압력용기의 강도안전성을 충분히 확보하기 위해서는 미국의 DOT-CFFC 안전기준에 의거 평가하고 설계하는 것이 바람직하다.

• Journal of Electrical Engineering and information Science
• /
• 제2권3호
• /
• pp.71-76
• /
• 1997

A lot of experiments and analyses have been done to determine the aging mechanism of mica-epoxy composite material used for large generator stator windings in order to estimate remaining life of the generator for last decades. After degrading artificially the mica-epoxy composite material, the surface analysis is performed to analyze breakdown mechanism of insulation in air and hydrogen atmosphere; i) In the case of air atmosphere, it is observed that an aging propagation from conductor to core by partial discharge effect and the formation of cracks between layers is widely carbonized surface. ii) In case of hydrogen atmosphere, the partial discharge effect is reduced by the hydrogen pressure (4kg/$\textrm{cm}^2$). Potassium ions forming a sheet of mica is replaced by hydrogen ions, which can lead to microcracks. It is confirmed that the sizes of crack by SEM analysis are 10∼20[$\mu\textrm{m}$] in length under air, and 1∼5[$\mu\textrm{m}$] in diameter, 10∼50[$\mu\textrm{m}$] in length under hydrogen atmosphere respectively. The breakdown mechanism of sttor winding insulation materials which are composed of mica-epoxy is analyzed by the component of materials with EDS, SEM techniques. We concluded that the postassium ions of mica components are replaced by H\ulcorner, H$_3$O\ulcorner at boundary area of mica-epoxy and/or mica-mica. It is proposed that through these phenomena, the conductive layers of potassium enable creation of voids and cracks due to thermal, mechanical, electrical and environmental stresses.

• 한국초전도ㆍ저온공학회논문지
• /
• 제12권1호
• /
• pp.42-46
• /
• 2010

The HTS power cable is composed of 2 layers for transmission and 1 layer for shield. The superconducting tapes of transmission layers and shield layer are wound in a cylindrical shape with a winding pitch. The radius of cylinder and the number of superconducting tapes are decided considering to the transmission current capacity and the critical current of superconducting tapes. The increasement of transmission current capacity will increase in volume of HTS cable system. In this paper, the composition method of supercondcuting power cable using the multi-cable is presented. The coated conductor tape can be wound on the smaller cylinder because it has the smaller critical bending diameter than the BSCCO tape. A small-scale cable was composed using the coated conductor tapes and a multi-cable is composed using a small-scale cable considering to transmission current capacity. Even increase of transmission current capacity, this method has advantage that the HTS superconducting power cable can be composed easily. The 22.9 kV and 154 kV superconducting power cable was composed using the presented method.

• 한국가스학회지
• /
• 제15권1호
• /
• pp.35-39
• /
• 2011

본 논문에서는 FEV 차량용 복합소재 연료탱크의 탄소섬유 적층두께에 따라 달라지는 강도안전성에 미치는 기여율의 영향을 해석하고자 한다. 기여율에 의한 영향을 FEM 모델링으로 고찰하기 위해, 복합소재 연료탱크의 알루미늄 라이너와 탄소섬유 적층에 작용하는 von Mises 등가응력을 후프방향과 헤리컬방향에 대하여 각각 계산 하였다. FEM 해석결과에 따르면, 알루미늄 라이너에 작용하는 등가응력 기여율은 후프방향으로는 77.5%, $70^{\circ}C$ 경사진 헤리컬방향으로는 18.11%, $12^{\circ}C$ 경사진 헤리컬방향으로는 4.39%로 각각 작용하는 것으로 나타났다. $12^{\circ}C$ 경사진 탄소섬유의 적층 두께비가 후프방향 적층 두께비의 42% 정도로 높게 유지됨에도 불구하고 알루미늄 라이너 소재에서 보여준 기여율 경향은 탄소섬유 적층의 강도안전성에 대해서도 유사한 것으로 나타났다. 결과적으로, 탄소섬유 연료탱크의 강도안전성은 탄소섬유 적층의 두께보다 와인딩 각도에 의해 더 많은 영향을 받는다는 계산결과를 보여주고 있다.