• Korean Journal of Agricultural Science
• /
• v.49 no.1
• /
• pp.151-162
• /
• 2022

This study was conducted to develop a rail-type boom sprayer, performing safe spraying with improved ergonomic postures during pesticide spraying of agro-photovoltaic power system. The sprayer was designed to reduce labor cost and to be safe from pesticide exposure, and was analyzed through a comparison with a conventional spray method. The rail-type boom sprayer, consisted of a self-propelled spray and hose winder, hose, and boom sprayer parts, was designed to automatically pull and spray in the vertical and horizontal directions. The performance of the sprayer for an agro-photovoltaic power system was appropriate. From the analysis of postures with the Ovako Working posture Analysis System (OWAS), Rapid Entire Body Assessment (REBA), and Rapid Upper Limb Assessment (RULA) methods, the musculoskeletal risk factors to the body using the rail-type boom sprayer were less than those with the conventional power sprayer. In addition, the possibility of pesticide poisoning was reduced compared to the conventional power sprayer. The working capacity with the rail-type boom sprayer was more than five times greater, compared with the conventional power sprayer. After performing pesticide spraying with the rail-type boom sprayer, the labor cost was reduced to 42,750 won·yr^-1, which was 90% (402,750 won·yr^-1) less than the cost with the use of a conventional power sprayer (445,500 won·yr^-1).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.1
• /
• pp.191-213
• /
• 2023

Romans in the fifth and sixth centuries BC referred to the people who brought silk from the Far East via the pre-Han (漢) silk road as "Seres". The Seres' colorful silk was characterized by intricate patterns and high yarn density, markedly different than thin "China silk". This study examined geographic and genealogic records and linguistic evidence and found support for the syllogistic conclusion that the "Seres" were the early Silla people. The Seres' territory in the seventh century BC was much larger than that of the Qin (秦) or Zhou (周), extending from Xinjiang to Balhae. According to literature records, Dong-Yi (東夷) invented Geum (錦) silk in the 11th century BC around Balhae, where silkworm trees were abundant. In the Han dynasty, even thin silk was rare and expensive, but in Gojoseon (古朝鮮), Geum silk was common and less valuable than beads. The Silla delivered surplus Geum silk, fur, and high-quality iron to the West. Linguistic evidence includes historical names for Silla: "Sira," "Saro," and "Sere," as well as records naming King Ruri of Silla "Seri-Ji"; and the replacement of the word "Seres" by the word "Silk" from the Goguryeo word for "yarn winder": "sil-kkury".

• Composites Research
• /
• v.14 no.6
• /
• pp.16-23
• /
• 2001

Analysis of mechanical behavior for a pultruded-wound hollow rod is presented. For this purpose, the pultruded-wound hollow rod is manufactured by the new winder attached to the conventional pultrusion system. And the conventional pultrusion process is newly altered to manufacture pultruded-wound specimens. A computer program, POST II, is modified to perform this study, In the nonlinear finite element formulation, the updated Lagrangian description method based on the second Piolar-Kirchhoff stress tensor and the Green strain tensor are used. For the finite element modeling of the composite hollow rod, the eight-node degenerated shell element is utilized. In order to estimate the failure, the maximum stress criterion is adopted to the averaged stress in the each layer of the finite elements. As numerical examples, the behavior of glass/up composite hollow rod is investigated from the initial loading to the final collapse. Present finite element results considering stiffness degradation and stress unload due to failure shows excellent agreement with experiments in the ultimate load, failure and deformations.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.3
• /
• pp.243-250
• /
• 2014

Fiber-optic cables towed by underwater vehicles have an important role in enhancing the mission capability of a mother ship. In general, fiber optic cables are unwound in water for securing unwinding stability and preventing unwinding-related problems. Therefore, in this study, the numerically simulated result is verified against the experimental result in water, and the cable-unwinding motion is predicted based on the increase in unwinding velocity. The experimental apparatus is composed of a water tank and a winder, and a high-speed camera is used for photographing the cable-unwinding motion. The numerical result defined in the Cartesian coordinate system is solved using a transient-state unwinding equation of motion. The numerical result agrees well with the experimental result, and it can predict cable-unwinding behaviors in according to an increase in the unwinding velocity.

• Membrane and Water Treatment
• /
• v.9 no.1
• /
• pp.43-51
• /
• 2018

Hollow fiber (HF) membranes are gaining wide interest over flat membranes due to their compaction and high area to surface volume ratio. This work addresses the fabrication of HF from polysulfone (PS) and polyethersulfone (PES) using N-methylpyrrolidone (NMP) as solvent in addition to other additives to achieve desired characteristics. The semi-pilot spinning system includes jacketed vessel, four spinneret block, coagulation and washing baths in addition to dryer and winder. Different parameters affecting dry-wet spinning phase inversion process were investigated. Dope compositions of PES, NMP and polyvinyl pyrrolidone (PVP) of varying molecular weights as additive were addressed. Some critical parameters of importance were also investigated. Those include dope flow rate, air gap, coagulation & washing baths and drying temperatures. The measured dope viscosity was in the range from 1.7 to 36.5 Pa.s. Air gap distance was adjusted from 20 to 45 cm and coagulation bath temperature from 20 to $46^{\circ}C$. The HF membranes were characterized by scanning electron microscope (SEM), atomic force microscope (AFM) and mechanical properties. Results indicated prevalence of finger like structure and average surface roughness from about 29 to 78.3 nm. Profile of stress strain characteristics revealed suitability of the fibers for downstream interventions for fabrication of thin film composite membrane. Different empirical correlations were formulated which enable deeper understanding of the interaction of the above mentioned variables. Data of pure water permeability (PWP) confirmed that the fabricated samples fall within the microfiltration (MF)-ultrafiltration (UF) range of membrane separation.

• Journal of Technology Innovation
• /
• v.13 no.2
• /
• pp.97-131
• /
• 2005

This paper has discussed several issues regarding the barriers and opportunities for technological catch-up by the late-comer countries and firms. As one of the barriers to technological catch-up, the paper emphasizes the uncertainty involved with the third stage of learning how to design. The barriers arise because as the forerunner firms refuse to sell or give license to successful catching-up firms who thus have to design the product by themselves. The paper discusses how to overcome this barrier. It also notes that if the crisis of design technology is a push factor for leapfrogging, arrival of new techno-economic paradigm can serve as a pull factor for leapfrogging, serving as a winder of opportunity. The, it emphasized the two risks with leapfrogging, namely the risk of choosing right technology or standards and the risk of creating initial markets, and how to overcome these risks. It discusses how to overcome these risks in leapfrogging, and differentiates diverse forms of knowledge accesses. Then, the paper takes up the issue of whether there can be a single common or several models for catch-up. A common element of catching-up is to enter new markets segments quickly, to manufacture with high levels of engineering excellence, and to be first-to-market by means of the best integrative designs. This observation is supported by the fact that Korea and Taiwan has achieved higher levels of technological capabilities in such sectors as featured by short cycle time of technology. The possibility of two alternative models for catch-up is also discussed in terms of the key difference between Korean and Taiwan, especially in the position toward the source of foreign knowledge and the paths taken toward the final goal of OBM. Taiwan followed the sequential steps of OEM, ODM and OBN, in collaboration or integration with the MNCs. Korean chaebols jumped from OEM directly to OBM even without consolidating design technology.

• Composites Research
• /
• v.23 no.3
• /
• pp.43-49
• /
• 2010

Basaltic fiber was prepared by continuous spinning process from Jeju Pyosun raw basalt materials. First, for confirming the melting characterization of basalt, basalt raw material put into Pt crucible and melted up to $1550^{\circ}C$ then quenched by dropping it into water. After quenching, the optimum fiber spinning conditions were investigated by measurement and analysis of XRD, TMA, high temperature viscosity, high temperature conductivity and high temperature microscope. The optimum spinning temperature and viscosity for preparation of continuous filament fiber were $1264^{\circ}C$ and $10^{2.8}$ poise at $1264^{\circ}C$, respectively. Properties of prepared spinning fiber were confirmed by tensile strength, FE-SEM, heat resisting test and others. The tensile strength of fiber prepared by spinning conditions of the bushing temperature $1240^{\circ}C$ and winder speed 4600rpm was 3660MPa.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.11
• /
• pp.1109-1117
• /
• 2017

In this work, a new control module and communication system associated with DSP are proposed to overcome the limitations of the contemporary prevailing PLC-based industrial equipment controller, and the performance of the proposed system was experimentally verified. In the light of this issue, a communication conversion scheme from RS-485 to Modbus, the dominant communication protocol used by PLC, was developed and shown to yield enhanced compatibility between devices. The proposed system allows for ~50％ cost reduction as well as downsizing of the industrial controllers. Furthermore, the design includes 24 V general digital I/O pins, which facilitate partial expansion of inputs and outputs. With Modbus communication implemented in DSP with the RS-485 interface, multi-to-multi communication may also be achieved.

• Korean Journal of Materials Research
• /
• v.27 no.1
• /
• pp.43-47
• /
• 2017

E (Electric) -glass fibers are the most widely used glass fibers, taking up 90 % of the long glass fiber market. However, very few papers have appeared on the physical characteristics of E-glass fibers and how they depend on the fiberizing temperature of fiber spinning. Glass fiber was fabricated via continuous spinning process using bulk E-glass. In order to fabricate the E-glass specimen, raw materials were put into a Pt crucible and melted at $1550^{\circ}C$ for 2hrs; mixture was then annealed at $621{\pm}10^{\circ}C$ for 2hrs. The transmittance and adaptable temperature for spinning of the bulk marble glass were characterized using a UV-visible spectrometer and a viscometer. Continuous spinning was carried out using direct melting spinning equipment as a function of the fiberizing temperature in the range of $1175{\sim}1250^{\circ}C$, while the winder speed was fixed at 500 rpm. Subsequently we investigated the physical properties of the E-glass fiber. The average diameter of the synthesized glass fiber was measured by optical microscope. The mechanical properties of the fiber were confirmed using a UTM (universal materials testing machine); the maximum tensile strength was measured and found to be $1843{\pm}449MPa$ at $1225^{\circ}C$.

• Journal of KIISE:Computing Practices and Letters
• /
• v.11 no.4
• /
• pp.312-333
• /
• 2005

SIP(Session Initiation Protocol) has been proposed for session control protocol of Internet multimedia communication system like VoIP(Voice over IP). SIP has complicated session control steps to support various kinds of audio and video formats and to assure service quality of real time data communication. Up until now, existing protocol analyzers can not provide such detailed information of SIP based communication system. In this paper, therefore, we propose a new protocol analyzer as a tool that can analyze and diagnose SIP based multimedia communication system throughout the session initiation, data exchange and session change steps. The propose traffic analyzer, which is called STAT(SIP based Traffic Analysis Tool), Is implemented on Winder's environment so that it is generally usable and extensible. Since STAT analyze low level packets captured via Ethernet broadcasting property, it is able to provide session status and real time traffic monitoring information without any affection to the communication system. The STAT which is implemented in this paper. therefore, is expected to be a useful tool for developing and managing of a SIP based multimedia communication system.