• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.187-188
• /
• 2018

In this study, wind pressure resistance test was carried out among the nine test items of KS F 2622 using five types of water-tight material. After comparing the results with the performance range of the current KS F 2622 wind pressure resistance test, it is recommended to check the adequacy of the addition of the combined series.

• 한국철도학회논문집
• /
• 제15권1호
• /
• pp.17-22
• /
• 2012

스크린 도어는 승강장에 설치하여 차량운행에 의한 승객의 안전을 확보하고, 승강장 내 공기질을 확보를 통한 쾌적함을 유지하며, 냉난방 에너지를 줄임으로써 다양한 효용성을 확보하고 있다. 이러한 스크린 도어의 안정성을 확보하기 위해서는 내풍압 평가를 고려한 설계가 필요하다. 본 연구에서는 승강장 스크린 도어의 내풍압을 예측하기 위하여 소사역사, 반밀폐형 스크린 도어, 전동차를 모델링하고 해석을 수행하였다. 또한 소사역은 지상역으로 외부에 노출되어 있기 때문에 기후조건에 영향을 받게 된다. 따라서 최악의 기후조건인 태풍의 영향을 고려하여 해석을 수행하였다. 해석결과, 최대 내풍압은 287 Pa이고, 외풍압을 고려한 최대압력은 865 Pa로 설계조건은 2756.25 Pa보다 약 3.1배 차이로 안정성이 확보됨을 알 수 있다.

• Wind and Structures
• /
• 제13권2호
• /
• pp.207-220
• /
• 2010

The 'chain reaction' effect of the interaction between wind pressure and windborne debris is likely to be a major cause of damage to residential buildings during severe wind events. The current paper (Part II) concerns the quantification of such pressure-debris interaction in an advanced vulnerability model that integrates the debris risk model developed in Part I and a component-based wind-pressure damage model. This vulnerability model may be applied to predict the cumulative wind damage during the passage of particular hurricanes, to estimate annual hurricane losses, or to conduct system reliability analysis for residential developments, with the effect of windborne debris fully considered.

• Wind and Structures
• /
• 제8권3호
• /
• pp.179-196
• /
• 2005

This paper describes the application of a wireless data acquisition system to monitor wind pressures and velocities with absolute pressure sensors and an anemometer. The system was developed for future deployment, as part of a research effort currently underway to instrument coastal homes in Florida to monitor roof wind pressures during hurricanes. The proposed wireless system will replace the current system that involves a large amount of hardwired connections from the sensors to the data processing unit that requires labor intensive wiring and preparation of the home. The paper describes comparison studies and field tests to assess the performance of the system. The new system offers the advantages of light hardware, ease of installation, capacity for 48 hours of continuous data acquisition, good frequency and amplitude responses, and a relatively simple maintenance. However, the tests also show that the shape of the shell that has been previously used to protect the sensors might interfere with the proper measurement of the pressures.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.1083-1084
• /
• 2009

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.206-211
• /
• 1992

A mathematical model of the blow-down type wind tunnel is developed in order to design the controller which controls the stagnation pressure being used to obtain the setpoint Mach Number. The motion of compressible fluids in the tunnel is modeled using the one-dimensional gasdynamics. The time responses of the wind tunnel states, such as pressures, mass flow rates, and valve open area, are investigated by digital computer simulation. By the simulation study it is shown that the real blow-down wind tunnel can be simulated by the obtained mathematical model.

• Wind and Structures
• /
• 제21권1호
• /
• pp.63-84
• /
• 2015

The shape of a tall building has significant impact on wind force generation and wind-induced dynamic response. To study the effect of recessed cavities, wind excitations on a wind-tunnel model of an H-section tall building were compared with those on a square-section building model. Characteristics of the fluctuating wind pressures on the side faces of the two tall buildings and their role in the generation of crosswind forces on the buildings were investigated with the space-time statistical tool of proper orthogonal decomposition (POD). This paper also compares the use of different pressure data sets for POD analysis in situations where pressures on two different surfaces are responsible for the generation of a wind force. The first POD mode is found to dominate the generation of crosswind excitation on the buildings.

• Wind and Structures
• /
• 제7권5호
• /
• pp.333-344
• /
• 2004

This paper illustrates application of the proper orthogonal decomposition (POD) and the autoregressive (AR) model to simulate large wind pressures due to gusts on a low-rise building. In the POD analysis, the covariance of the ensemble of large wind pressures is employed to calculate the principal modes and coordinates. The POD principal coordinates are modeled using the AR process, and the fitted AR models are employed to generate the principal coordinates. The generated principal coordinates are then used to simulate large wind pressures. The results show that the structure characterizing large wind pressures is well represented by the dominant eigenmodes (up to the first fifteen eigenmodes). Also, wind pressures with large peak values are simulated very well using the dominant eigenmodes along with the principal coordinates generated by the AR models.

• Wind and Structures
• /
• 제20권1호
• /
• pp.37-58
• /
• 2015

As wind flows around a sharp-edged body, the resulting separated flow becomes complicated, with multiple separations and reattachments as well as vortex recirculation. This widespread and unpredictable phenomenon has long been studied academically as well as in engineering applications. In this study, the flow characteristics around rectangular prisms with five different aspect ratios were determined through wind tunnel experiments and a detached eddy simulation, that placed the objects in a simulated deep turbulent boundary layer at $Re=4.6{\times}10^4$. A series of rectangular prisms with the same height (h = 80 mm), different longitudinal lengths (l = 0.5h, h, and 2h), or different transverse widths (w = 0.5h, h, and 2h) were employed to observe the effects of the aspect ratio. Furthermore, five wind directions ($0^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$, and $45^{\circ}$) were selected to observe the effects of the wind direction. The simulated results of the surface pressure were compared to the wind tunnel experiment results and the existing results of previous papers. The vortex and spectrum were also analyzed to determine the detailed flow structure around the body. The paper also highlights the pressure distribution around the rectangular prisms with respect to the different aspect ratios. With an increasing transverse width, the surface suction pressure on the top and side surfaces becomes stronger. In addition, depending on the wind direction, the pressure coefficient experiences a large variation and can even change from a negative to a positive value on the side surface of the cube model.

• 한국공간구조학회논문집
• /
• 제20권1호
• /
• pp.69-77
• /
• 2020

In this paper, the mean and fluctuating pressure coefficients derived from the results of wind tunnel tests on closed and open dome roofs were analyzed. The distribution characteristics of the fluctuating pressure according to the opening ratio and the height change were discussed. The analysis results showed that when the roof is open, the overall wind pressure decreases due to the open space, but more fluctuation occurred than the closed dome roof.