• 한국항공우주학회지
• /
• 제42권2호
• /
• pp.134-143
• /
• 2014

추운 기후에서 운영되는 풍력터빈 시스템의 표면에 발생한 결빙으로 인하여 공기역학적 성능이 크게 저하될 수 있다. 이러한 결빙은 양력감소 및 항력증가를 야기하고, 발전효율에 부정적인 영향을 미치게 된다. 이로 인하여 풍력발전기의 성능저하 또는 과부하, 무게중심의 변화에 따른 과도진동, 결빙파편이 지상으로 떨어질 경우의 안전성 문제, 계기의 결빙으로 인한 계기 측정오차, 최악의 경우 풍력 시스템 정지 등의 문제가 발생한다. 본 연구에서는 결빙증식이 풍력 발전기의 공력특성에 미치는 영향을 CFD 기법을 이용해 분석하였다. 또한 결빙증식 결과를 바탕으로 BEM 기법을 적용시켜 삼차원 블레이드에 대한 공력성능을 계산하였다. 결빙의 두께는 상대적인 속도차이에 의해 블레이드 중심에서 끝단으로 갈수록 증가함을 알 수 있었고, 공기의 속도가 결빙증식에 미치는 주요 인자임을 확인하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.184.3-184.3
• /
• 2010

This study suggests a modeling of grid-connected wind turbine generation systems and performs simulation according to increase/decrease of real wind speed. MATLAB & SIMULINK implemented modeling of grid-connected wind turbine generation system. Terminal voltage, grid voltage, and active/reactive power shall be observed following the performance of simulation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.178-179
• /
• 2010

This paper presents a simulation model and analysis of grid-tied wind turbine generator with batteries using the PSCAD/EMTDC software. The modeled system is consist of two inverters and one bidirectional DC/DC converter. These inverter are to capture the maximum active power under varying wind conditions and to keep the DC-Link voltage magnitude at a specific level. And the bidirectional DC/DC converter makes battery charging or discharging depend on power gap between wind turbine output and local load. Aerodynamic models are applied for a wind turbine blade simulator.

• 한국생산제조학회지
• /
• 제23권5호
• /
• pp.443-449
• /
• 2014

This study aims to develop a Flywheel Energy Storage System (FESS) that uses wind power produced when an urban train is in motion, by utilizing a mounted turbine. This system was designed to generate and store electric power from wind power of a travelling urban train. The flywheel was designed to continue rotation using a one-way clutch bearing installed in the turbine shaft pulley, even in cases where the urban train decelerates or stops. This FESS can generate an additional 44% of electric power in comparison to a system not equipped with a flywheel. The generated power and operational features of the FESS were evaluated and verified through a wind tunnel test. The results show that the electric power stored in the FESS could supply auxiliary power for urban train components or service equipment, such as charging mobiles, Wi-Fi modules, and electric lights.

• 한국기술혁신학회:학술대회논문집
• /
• 한국기술혁신학회 2006년도 추계학술대회
• /
• pp.3-15
• /
• 2006

• 풍력에너지저널
• /
• 제15권1호
• /
• pp.60-68
• /
• 2024

In this study, a hardware-in-the-loop simulation (HILS) environment was established using MATLAB/Simulink to simulate and verify the power performance of a wind turbine. The target wind turbine was selected as the NREL 5 MW model, and modeling was performed based on the disclosed specifications. The HILS environment consists of a PC equipped with a MATLAB/Simulink program, a programmable logic controller (PLC) for uploading and linking control algorithms, and data acquisition (DAQ) equipment to manage wind turbine data input and output. The operation of the HILS environment was carried out as a procedure of operation (PC) of the target wind turbine modeled based on MATLAB/Simulink, data acquisition (PLC) of control algorithms, control command calculation (PLC), and control command input (PC). The simulation was performed using the HILS environment under turbulent wind conditions and compared with the simulation results performed under the same conditions in the HILS environment using the commercial program Bladed for performance verification. From the comparison, it was found that the dynamic simulation results of the Bladed HILS and the MATLAB HILS were close in power performances and the errors in the average values of rotor rotation speed and power generation between the two simulations were about 0.44 % and 3.3 %, respectively.

• 한국가시화정보학회지
• /
• 제11권1호
• /
• pp.28-33
• /
• 2013

This paper describes aerodynamic characteristics of an Archimedes spiral wind turbine with various angles of attack. The range of angles was controlled from $-30^{\circ}$ (clockwise) to $+30^{\circ}$ (clockwise). The rotating speed of wind turbine at the same angle of attack in both directions was different. The reason why the-maximum rotational speed was observed at $15^{\circ}$ in clockwise direction can be explained based on angular momentum conservation. Quantitative flow visualization around Archimedes wind turbine blade was carried out between $-15^{\circ}$ (clockwise) and $+15^{\circ}$ (counter clockwise) using high resolution PIV method. The relationship between drag force and rotating speeds was discussed. From these results, optimum design on yawing system of Archimedes spiral wind turbine may provide high efficiency on small wind power system.

• 전기학회논문지
• /
• 제61권2호
• /
• pp.231-236
• /
• 2012

This paper presents the MPPT(Maximum Power Point Tracking)control method of the PMSG wind generation system using the turbine model with a squirrel cage induction motor. The torque of squirrel cage induction turbine model is controlled by mathematization of speed characteristics of real blade. In this paper, maintenance and cost issues into consideration, except for previous method using information of the velocity of the wind speed sensor, the algorithm is presented. The algorithm is controlled by tracking the optimal point, the generator speed and maximum grid power. The vector controls of the generator side converter and the grid side converter are controlled respectively to obtain maximum torque and regulate unity power factor. With Psim simulations and experiments, the efficiency of squirrel cage induction turbine model and the validity of control algorithm are verified.

• 전기전자학회논문지
• /
• 제19권2호
• /
• pp.225-231
• /
• 2015

토크제어를 이용한 최대 출력 제어에서 얼마나 많은 풍력에너지를 전기에너지로 변환하는지 결정하는 파라미터 K는 블레이드 형상 변화. 공기 밀도 등으로 인하여 변동하게 된다. 이러한 파라미터 K가 최적의 값이 아니면 이는 출력의 손실까지 이어진다. 이렇게 변동하는 K로 인하여 최적의 K를 찾는 것이 풍력발전시스템의 손실을 줄이는 중요한 문제이다. 본 논문은 양방향 컨버터 제어와 토크제어를 사용한 풍력발전시스템을 고려하여 초기의 K를 이용하여 빠른 제어를 수행하고 칼만 필터를 이용한 기계적 출력을 추정하여 최대 출력 제어 알고리즘의 입력으로 다시 사용하여 결과적으로 최적의 최대 출력 제어 제어를 수행하는 적응 최대 출력 제어 알고리즘을 제안한다.

• 드라이브 ㆍ 컨트롤
• /
• 제10권1호
• /
• pp.21-28
• /
• 2013

Wind energy has been more and more important and contributive in the energy utilization of the world. This paper proposed a novel method for Wind Energy Conversion System (WECS), in which a secondary control hydrostatic transmission (SC-HST) with two hydraulic accumulators, were employed for wind energy conversion system. This approach can absorb the excessive power of turbine, keep the generator from over-speed and maintain the speed of generator in low speed of turbine. A PID controller was designed for speed control to track a predefined speed. The simulation results indicated that the speed of the generator was ensured with the relative error less than 2%; and the efficiency of the proposed system was 70.4%.