• Wind and Structures
• /
• v.27 no.5
• /
• pp.347-356
• /
• 2018

In this paper, stress distribution for a structurally stable greenhouse is considered in the present paper with subsequent investigation into the detailed stress distribution contour with the variation of self-weight and wind pressure level designation method under wind velocity of less than 30 m/sec. For reliable analysis, wind pressure coefficients of a single greenhouse unit were modeled and compared with experiment with correlation coefficient greater than 0.99. Wind load level was designated twofold: direct mapping of fluid dynamic analysis and conversion of modeled results into wind pressure coefficients ($C_P$). Finally, design criteria of EN1991-1-4 and NEN3859 were applied in terms of their wind pressure coefficients for comparison. $C_P$ of CFD result was low in the most of the modeled area but was high only in the first roof wind facing and the last lee facing areas. Besides, structural analysis results were similar in terms of stress distribution as per EN and direct mapping while NEN revealed higher level of stress for the last roof area. The maximum stress levels are arranged in decreasing order of mapping, EN, and NEN, generating 8% error observed between the EN and mapping results under 30 m/sec of wind velocity. On the other hand, effect of dead weight on the stress distribution was investigated via variation of high stress position with wind velocity, confirming shift of such position from the center to the forward head wind direction. The sensitivity of stress for wind velocity was less than 0.8% and negligible at wind velocity greater than 20 m/sec, thus eliminating self-weight effect.

• 한국해양학회지
• /
• v.23 no.3
• /
• pp.97-109
• /
• 1988

The wind stress and the wind-stress curl over the East Sea of Korea are computed from the ship-observed wind data by the FRDA. In order to emphasize the role of the wind in determining the upper-layer structure, rather persistent and strong winds are selected based on the wind-rose data. The monthly averaged wind stresses are comparable in size with the average value over the Japan Sea. But the monthly averaged magnitude of the wind-stress curl is very large compared to the one over the Japan Sea. This may be due to the spatial variation of the wind speeds influenced by the local orography. The wind-driven upper-layer thickness over the East Sea suggests that the site of deep upper layer indeed exists regardless of season but the position does not appear to be fixed. The convergence of warm surface water driven by the wind could be referred as the warm core.

• Water for future
• /
• v.19 no.3
• /
• pp.239-248
• /
• 1986

Monthly wind stress, wind stress curl and volume transport stream functions are computed in the Eastern Sea(Japan Sea) based upon observed wind and atmospheric pressure data respectively. The presented two results show different distributios on locality and season but as common features the results reveal the northwesterly surface wind stress \ulcorner 새 the monsoon in winter, south to southwesterly wind stress \ulcorner 새 the southerly wind in summer and strond anticyclonic curl in the northern part on the Eastern Sea(Japan Sea) in winter. In the distributions obtained from the sea level atmospheric pressure data, the maximum value of the wind stress and of curls of small scales are shown off the southeast coast of Siberia and northeast coast of Korea. Volume transport distributions obtained from the Sverdrup relationship suggest that the strong northward boundary current can be formed along the northeast coast of Korea in winter and weak southward boundary current in summer.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.5
• /
• pp.747-754
• /
• 2012

A solar power generator is usually installed outdoors and it is exposed to extreme environments such as snow weight and wind loading. The solar tracker structure should be designed to have sufficient stiffness and strength against such loads. In this paper, simulations are performed by varying the parameters such as wind directions, wind speeds and the pose of the solar panel to evaluate the effects of extreme wind on solar tracker. As the effects of wind load, maximum displacement and maximum equivalent stress in the solar tracker are calculated. Finite element stress analysis is carried out by using the pressure distribution that is obtained by prior wind load analysis due to the flow around the solar tracker. The stress analysis of solar tracker to check and/or improve structural robustness provides some useful instructions for structural design or revision of solar tracker.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11a
• /
• pp.177-184
• /
• 2003

Numerical simulation on marine wind and sea surface elevation was carried out using both three-dimensional hydrostatic and non-hydrostatic models and a simple oceanic model from 0900 LST, August 13 to 0900 LST, August 15, 1995. As daytime easterly meso-scale sea-breeze from the eastern sea penetrates Kangnung city in the center part as basin and goes up along the slope of Mt. Taegullyang in the west, it confronts synoptic-scale westerly wind blowing over the top of the mountain at the mid of the eastern slope and then the resultant wind produces an upper level westerly return flow toward the East Sea. In a narrow band of weak surface wind within 10km of the coastal sea, wind stress is generally small, less than l${\times}$10E-2 Pa and it reaches 2 ${\times}$ 10E-2 Pa to the 35 km. Positive wind stress curl of 15 $\times$ 10E-5Pa $m^{-1}$ still exists in the same band and corresponds to the ascent of 70 em from the sea level. This is due to the generation of northerly wind driven current with a speed of 11 m $S^{-1}$ along the coast under the influence of south-easterly wind and makes an intrusion of warm waters from the southern sea into the northern coast, such as the East Korea Warm Current. On the other hand, even if nighttime downslope windstorm of 14m/s associated with both mountain wind and land-breeze produces the development of internal gravity waves with a hydraulic jump motion of air near the coastal inland surface, the surface wind in the coastal sea is relatively moderate south-westerly wind, resulting in moderate wind stress. Negative wind stress curl in the coast causes the subsidence of the sea surface of 15 em along the coast and south-westerly coastal surface wind drives alongshore south-easterly wind driven current, opposite to the daytime one. Then, it causes the intrusion of cold waters like the North Korea Cold Current in the northern coastal sea into the narrow band of the southern coastal sea. However, the band of positive wind stress curl at the distance of 30km away from the coast toward further offshore area can also cause the uprising of sea waters and the intrusion of warm waters from the southern sea toward the northern sea (northerly wind driven current), resulting in a counter-clockwise wind driven current. These clockwise and counter-clockwise currents much induce the formation of low clouds containing fog and drizzle in the coastal region.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.52-53
• /
• 2005

Time series of gridded surface wind and wind-stress vectors over the world ocean have been constructed by satellite scatterometer data. The products are derived from the ERS-l,2 covering 9 years during 1992-2000 and the Sea Winds on board QuikSCAT (Qscat) which has been operating up to the present since June 1999, so they allows us to analyze variabilities with various time scales. In this study, we focus on interannual variability of the wind stress in the mid- and high-latitude region of North Pacific. These are compared with those by numerical weather prediction(NWP) ones (NCEP Reanalysis). We also examine variability in the wind-stress curl field that is an important factor for ocean dynamics and focus its time and spatial characters in the northwestern Pacific around Japan. It is found that the vorticity field in the lower atmosphere tends to increase gradually with time, suggesting the enhancement of the North Pacific subtropical gyre.

• Wind and Structures
• /
• v.15 no.4
• /
• pp.301-311
• /
• 2012

This paper presents results from the structural monitoring of a steel wind tower characterized and presented in Part I of the paper. Monitoring period corresponds to about fifteen months of measurements. Results presented refer to stress distribution on shell and in bolts at different heights, stress fatigue spectra, section forces along height evaluated from the stress measurements and comparison with design forces, dynamic response in terms of accelerations, stresses, deflections and rotations.

• 한국해양학회지
• /
• v.16 no.2
• /
• pp.99-107
• /
• 1981

A partial differential equation for the adjusted sea level, obtained from the long wave equations in shallow water, is reduced to a simpler one by the use of physically reasonable approximations based on the observations. The similar equation for the stream function indicates that shelf waves are generated by the longshore wind stress. This indication is in good agreement with the high correlation between the adjusted sea levels and the longshore wind stress. From the dispersion relationship and the boundary conditions, there exist a countable infinite number of modes which satisfy a first-order wave equations. The adjusted sea level for a given wind stress can easily be calculated by utilizing the convolution and the Fourier transformation. Some detailed solutions are presented here for sinusoidal and exponential wind stress.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.39.1-39.1
• /
• 2011

Due to less turbulence and no land limitation, offshore wind energy gets more attention than onshore. Jacket structure is regarded as a suitable solution for the water depth ranging from 30 to 80 meters. In general, joint stress concentration of jacket support structures affects their fatigue life. Nowadays, most jacket structures for offshore wind turbines have tubular X-joint between legs. In this paper, a study on X-joint stress concentration of offshore wind turbine jacket structure is performed by using 50m water depth model. Stress of X-joint on offshore environmental conditions are discussed.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.3
• /
• pp.21-27
• /
• 2016

The static and dynamic structural integrity qualification was performed through the seismic analysis of a small-size Savonius-type vertical wind turbine at dead weight plus wind load and seismic loads. The ANSYS finite element program was used to develop the FEM model of the wind turbine and to accomplish static, modal, and dynamic frequency response analyses. The stress of the wind turbine structure for each wind load and dead weight was calculated and combined by taking the square root of the sum of the squares (SRSS) to obtain static stresses. Seismic response spectrum analysis was also carried out in the horizontal (X and Y) and vertical (Z) directions to determine the response stress distribution for the required response spectrum (RRS) at safe-shutdown earthquake with a 5% damping (SSE-5%) condition. The stress resulting from the seismic analysis in each of the three directions was combined with the SRSS to yield dynamic stresses. These static and dynamic stresses were summed by using the same SRSS. Finally, this total stress was compared with the allowable stress design, which was calculated based on the requirements of the KBC 2009, KS C IEC 61400-1, and KS C IEC 61400-2 codes.