• Geomechanics and Engineering
• /
• 제37권2호
• /
• pp.167-178
• /
• 2024

The natural frequency shift under cyclic environmental loads is a key issue in the design of monopile-based offshore wind power turbines because of their dynamic sensitivity. Existing evidence reveals that the natural frequency shift of the turbine system in sand is related to the varying foundation stiffness, which is caused by soil deformation around the monopile under cyclic loads. Therefore, it is an urgent need to investigate the effect of soil deformation on the system frequency. In the present paper, three generalized geometric models that can describe soil deformation under two-way cyclic loads are proposed. On this basis, the cycling-induced changes in soil parameters around the monopile are quantified. A theoretical approach considering three-spring foundation stiffness is employed to calculate the natural frequency during cycling. Further, a parametric study is conducted to describe and evaluate the frequency shift characteristics of the system under different conditions of sand relative density, pile slenderness ratio and pile-soil relative stiffness. The results indicate that the frequency shift trends are mainly affected by the pile-soil relative stiffness. Following the relevant conclusions, a design optimization is proposed to avoid resonance of the monopile-based wind turbines during their service life.

• 한국BIM학회 논문집
• /
• 제12권1호
• /
• pp.62-71
• /
• 2022

In order to overcome the limitations of th 2D method regardless of the client's request, the application of BIM was reviewed to create hight-quality products using 3D models and various BIM information for offshore wind jacket-type structures. First, we defined the input value through analysis of the target structure and wrote an algorithm(script library) and library to complete the BIM model. Design review using geometry information based on th BIM model, usage for visualization drawings and quantity calculation were reviewed. For the purpose of initial review, only libraries with a limited number of subjects limitations on the scope of research were used. However, in the futrue, various libraries will be developed and research will be conducted to expand the scope of subjects.

• Structural Engineering and Mechanics
• /
• 제63권6호
• /
• pp.809-824
• /
• 2017

The accurate evaluation of wind characteristics and wind-induced structural responses during a typhoon is of significant importance for bridge design and safety assessment. This paper presents an expectation maximization (EM) algorithm-based angular-linear approach for probabilistic modeling of field-measured wind characteristics. The proposed method has been applied to model the wind speed and direction data during typhoons recorded by the structural health monitoring (SHM) system instrumented on the arch Jiubao Bridge located in Hangzhou, China. In the summer of 2015, three typhoons, i.e., Typhoon Chan-hom, Typhoon Soudelor and Typhoon Goni, made landfall in the east of China and then struck the Jiubao Bridge. By analyzing the wind monitoring data such as the wind speed and direction measured by three anemometers during typhoons, the wind characteristics during typhoons are derived, including the average wind speed and direction, turbulence intensity, gust factor, turbulence integral scale, and power spectral density (PSD). An EM algorithm-based angular-linear modeling approach is proposed for modeling the joint distribution of the wind speed and direction. For the marginal distribution of the wind speed, the finite mixture of two-parameter Weibull distribution is employed, and the finite mixture of von Mises distribution is used to represent the wind direction. The parameters of each distribution model are estimated by use of the EM algorithm, and the optimal model is determined by the values of $R^2$ statistic and the Akaike's information criterion (AIC). The results indicate that the stochastic properties of the wind field around the bridge site during typhoons are effectively characterized by the proposed EM algorithm-based angular-linear modeling approach. The formulated joint distribution of the wind speed and direction can serve as a solid foundation for the purpose of accurately evaluating the typhoon-induced fatigue damage of long-span bridges.

• 한국지반환경공학회 논문집
• /
• 제22권10호
• /
• pp.31-36
• /
• 2021

풍력발전기 기초의 누적 회전각과 침하량을 예측하는 것은 매우 중요하다. 하지만 반복하중에 따른 버킷기초의 장기거동을 분석하는 연구는 거의 이루어지지 않았다. 본 연구에서는 사질토 지반에 설치된 버킷기초의 다양한 3차원 유한요소해석을 수행하였다. 반복 삼축압축시험으로부터 도출된 강성감소 경험식을 수치모델에 사용자 서브루틴으로 적용하여 해석을 수행하였다. 강성감소 모델을 사용하여 버킷기초의 누적 회전각을 산정하였으며, 반복하중 작용 시 거동에 영향을 주는 주요인자에 대한 분석이 이루어졌다.

• 한국지반환경공학회 논문집
• /
• 제18권8호
• /
• pp.5-15
• /
• 2017

풍력발전기의 안정성 평가를 위해 수행하는 통합하중해석에서 기초는 하중과 변위의 관계로 정의되는 기초강성을 입력하여 적용이 가능하다. 이때 기초의 형상과 지반의 조건이 정확하게 반영된 기초의 강성이 적용되어야 하므로, 지반의 탄소성 거동을 정밀하게 반영한 버킷기초의 강성 산정방법이 필요하다. 본 연구에서는 다양한 사질토의 마찰각과 버킷기초 형상에 대한 유한요소해석을 수행하여 기초의 강성을 산정하였으며, 해석결과로부터 정규화된 기초강성 매트릭스가 제안되었다. 제안된 버킷기초의 강성 산정방법은 설계에 직접 적용될 수 있는 유용한 결과라고 판단된다.

• 한국전기전자재료학회논문지
• /
• 제23권7호
• /
• pp.560-565
• /
• 2010

This paper presents the design factor of an overhead transmission tower structure in order to reduce the tower weight. The behaviour of transmission tower structures are affected by the horizontal angle of the tower structure, the equivalent wind pressure group, the slope of the main post of the tower, the separation of the internode and the use of high-strength materials in their construction. Tower weight can be reduced by approximately 30% reduce weight by means of optimal design based on a consideration of all the above factors. In addition, the design of the foundation of the tower with the shear key installation to increase horizontal support together with a modified angle of inclination to the ground can reduce by about 37% the amount of concrete used during construction. The area of ground disturbed by the construction of the tower foundation can thus be reduced by approximately 33%. Therefore it is possible to build an environmently-friendly T/L tower with the mechanical properties of existing towers.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권8호
• /
• pp.1020-1027
• /
• 2007

As a national enterprise has been expanded over and over, the worldwide energy consumption has been growing necessarily. Moreover, as recently energy spendings are on the increase in countries such as BRICs, it has resulted that a rise in the price of both oil and mineral resources and instability between supply and demand become serious issue in the world resources market. The recent high price of oil and mineral resources have a deep influence on economy and threaten energy security and even national prosperity of Korea. In addition to these, exhaustion of fossil fuels and the enhanced greenhouse effect which results from gases emitted as a result of fossil fuels has been in serious questions which occur a great deal of effort to secure clean energy resources all around the world. As it is considerably possible for Korea that the Kyoto protocol may come into effect on and after 2013, it is essential to require the technological development to promote energy efficiency as well as to develope safe and renewable energy resources. The wind energy technology which converts kinetic energy into electrical energy has been in the focus of the world's attention. In this study, two-dimensional numerical analyses were conducted to observe subsidence aspects of the sea bottom on differently applied loads and various ground conditions.

• Environmental Engineering Research
• /
• 제21권4호
• /
• pp.409-419
• /
• 2016

As a major energy consumption province, the issue about the carbon emissions in Hebei Province, China has been concerned by the government. The carbon emissions can be effectively reduced due to a more rational energy consumption structure. Thus, in this paper the constraint of low carbon emissions is considered as a foundation and four energies--coal, petroleum, natural gas and electricity including wind power, nuclear power and hydro-power etc are selected as the main analysis objects of the adjustment of energy structure. This paper takes energy cost minimum and carbon trading cost minimum as the objective functions based on the economic growth, energy saving and emission reduction targets and constructs an optimization model of energy consumption structure. And empirical research about energy consumption structure optimization in 2015 and 2020 is carried out based on the energy consumption data in Hebei Province, China during the period 1995-2013, which indicates that the energy consumption in Hebei dominated by coal cannot be replaced in the next seven years, from 2014 to 2020, when the coal consumption proportion is still up to 85.93%. Finally, the corresponding policy suggestions are put forward, according to the results of the energy structure optimization in Hebei Province.

• 대한기계학회논문집B
• /
• 제37권8호
• /
• pp.789-798
• /
• 2013

형식인증시험을 통해 획득된 풍력발전기의 기계적 하중 데이터를 분석하기 위한 관련 프로그램 개발과 절차가 수행되었다. IEC 61400-13 규격을 기반으로 하는 측정 데이터에 대한 검증, 하중유형에 따른 분류, 시계열 및 통계 데이터 분석, 파워 스펙트럼 밀도함수 및 피로하중 스펙트럼 계산, 등가하중 계산 등의 절차가 본 프로그램을 통해 수행되었다. 수집된 데이터들이 피로하중을 산정하기에 충분한가를 판단하기 위해 정상전력생산의 경우에 대한 수집행렬을 구성하였다. 50 개의 하중 범위 분할 개수를 사용하는 우수집계법을 통해 피로하중 스펙트럼이 얻어지며, 사용된 재료에 따라 다르게 S-N 선도의 기울기를 적용하여 최종적으로 등가하중을 산출하였다. 모노파일 하부구조를 가지는 NREL 5MW 풍력발전기의 공탄성 시뮬레이션 데이터에 이용하여 위의 전반적인 절차를 수행하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.764-767
• /
• 2010

전북대학교 고온플라즈마 응용연구센터 구축사업단에서는 MW급 초음속 플라즈마 풍동을 구축하고 있다. 구축되는 장비는 0.4MW/2.4MW급 Huels형 DC 플라즈마 장치 및 60kW/200kW급 RF 플라즈마장치 등으로 구성되며 이러한 장비를 지원하는 공통지원설비가 별도로 구축되게 된다. 공통지원설비는 플라즈마 풍동을 구동하기 위한 수변전설비 및 가스공급설비, 냉각수공급설비, NOx 제거용 후처리 설비, 예비전원설비 등으로 구성되어 있다. 4기의 플라즈마 장치와 공통지원설비를 위한 건축물은 시험동, 연구동, 수변전동, 기체저장동, 냉각탑 기초로 구성되어 있다.