• Journal of Astronomy and Space Sciences
• /
• v.41 no.3
• /
• pp.171-194
• /
• 2024

This study reports comprehensive observations for the G5-level geomagnetic storm that occurred from May 10 to 12, 2024, the most intense event since the 2003 Halloween storm. The storm was triggered by a series of coronal mass ejections (CMEs) originating from the merging of two active regions 13664/13668, which formed a large and complex photospheric magnetic configuration and produced X-class flares in early May 2024. Among the events, the most significant CME, driven by an X2.2 flare on May 9, caught up with and merged with a preceding slower CME associated with an X-class flare on May 8. These combined CMEs reached 1 AU simultaneously, resulting in an extreme geomagnetic storm. Geostationary satellite observations revealed changes in Earth's magnetosphere due to solar wind impacts, increased fluxes of high-energy particles, and periodic magnetic field fluctuations accompanied by particle injections. Extreme geomagnetic storms resulting from the interaction of the solar wind with the Earth's magnetosphere caused significant energy influx into Earth's upper atmosphere over the polar regions, leading to thermospheric heating and changes in the global atmospheric composition and ionosphere. As part of this global disturbance, significant disruptions were also observed in the East Asian sector, including the Korean Peninsula. Ground-based observations show strong negative storm effects in the ionosphere, which are associated with thermospheric heating and resulting in decreases in the oxygen-to-nitrogen ratio (O/N₂) in high-latitude regions. Global responses of storm-time prompt penetration electric fields were also observed from magnetometers over the East-Asian longitudinal sector. We also briefly report storm-time responses of aurora and cosmic rays using all-sky cameras and neutron monitors operated by the Korea Astronomy and Space Science Institute (KASI). The extensive observations of the G5-level storm offer crucial insights into Sun-Earth interactions during extreme space weather events and may help establish better preparation for future space weather challenges.

• Journal of Korean Medical classics
• /
• v.26 no.3
• /
• pp.1-9
• /
• 2013

Objective : In South Song era, Choe Ga-eon(崔嘉彦) built Seowonam(西源庵), lived as a hermit and communicated with Juja(朱子) in LuShan(廬山), JiangXi province(江西省), JiuJiang city(九江市). Maekgyeol(脈訣) written by him significantly influenced the forthcoming medical doctors, who took over his studies and were called the school of Seowon. Little information about his life and his successors encouraged this study. Method : The core contents of Maekgyeol(脈訣), his life based on Waryongamgi(臥龍庵記) and Seowongamgi(西源庵記) written by Juja(朱子) and his successors on the basis of various medical books were investigated. Result : The Seowonam(西源庵) is located at the entrance of xiufeng Scenic spot(秀峰景區) which is 6km west from center of Xingzi county(星子縣), JiangXi province(江西省), JiuJiang city(九江市). The points of Maekgyeol(脈訣) are inferring the symptom of wind, energy, cold and heat by categorizing seven exterior and eight interior pulse into four pulses of float, sink, slow and quick and diagnosing a disease of three warmer and the five viscera and the six entrails by subordinating four pulses to Chon, Gwan, and Cheok(寸關尺). By writing the book of Sawonron(四原論) he clarified the clinical point, pulse, disease, symptom, treatment with learning the cause of a disease through pulse, understanding the symptom through a disease, and giving a remedy through a symptom. Then he communicated with Juja(朱子) assigned to NanKangJun(南康軍) as a ruler. He helped Juja(朱子) to build Waryongam(臥龍庵) and Juja(朱子) wrote Seowonamgi(西源庵記) for him. Conclusion : The members of medical doctors of the school of Seowon were Choe Ga-eon(崔嘉彦) and his follower Yu Gae(劉開), Yugae's disciple Eom Yong-hwa(嚴用和) and Ju Jong-yang(朱宗陽) and Ju Jong-yang's disciple Jang Do-jung(張道中). They, who were famous for pulse, had contributed to advancing study of pulses in the field of oriental medicine.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.38.2-38.2
• /
• 2010

Biomimetc is a new domain of learning that proposes a solution getting clues from nature. There seems to be a sign of this phenomenon in fields of Renewable Energy. Foe example, Wind power was imitate the whale's fin that was improve efficiency of generating energy. This study focused on the photovoltaic generation as the instance of applying biomimetic. Efficiency is the most important factor in field of Photovoltaic generation. When given solar cell taking the sun light, most important fields of the study are absorb more light and increase the quantity of generation. For improving efficiency, the solar cell were builded up textures of taking a pyramid form, such a surface structure taking a role for remaining the light. This effects do the role as increasing absorbing efficiency. Such phenomenon calls Light Trapping, locking up the light on the surface of solar cell for a long time. Light is a vital factor to plants in the nature. Plants grow up through the photosynthesis that absorbing light for growth and propagation. So, plants make a effort how can absorb more the light in poor surroundings. This study set up a goal that imitates the minute surface structure of plants and applies to the existing solar cells's surface structure, so it can improve the efficiency of absorbing light. We used Light Tools software analyzing geometrical optics to analyze efficiency about new designed textures on the computer. We made a comparison between existing textures and new designed textures. Consequently, new designed textures were advanced efficiency, absorbing rates of light increasing about 7 percent. In comparison with existing and new textures, advancing about 20 percent in the efficient aspect.

• The Journal of the Acoustical Society of Korea
• /
• v.9 no.2
• /
• pp.42-52
• /
• 1990

A method of measuring impulse response of acoustic system, two kinds of cross-correlation methods (the direct correlation method and the M-sequence modulation correlation method) were applied. According to the direct correlation method, by using stationary random noise source and by calculating the cross-correlation function between the sourece and the output signal, equivalent impulse response can be obtained not being influenced by the back ground noises. By applying this method, the measurement of echo-time patterns in rooms and oblique incident sound absorption characteristics of sound absorbing materials was carried out. In the case of the M-sequence modulation correlation method which was contrived by Aoshima, an intermittent random nosie modulated by M-sequence signal is used as the source signal, and the cross-correlation function between the M-sequence signal and the squared output signal is calculated. According to this method, equivalent energy impulse response (squared impulse response) of te propagation system can be obtained without being influenced by the back ground noises and the air fluctuation caused by wind. As the applcaition of this measuring method to the architectural acoustics, the meaurements of echo-time patterns, reverberation decays and sound pressure lev디 distributions in rooms and sound insulation efficiencies in buildings were carried out. From these experimental studies, it has been found that this M-sequence modulation correlation method is markedly useful especially for the field masurement of sound insulation under high back ground noise condition.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.12
• /
• pp.101-109
• /
• 2019

The bucket platform is a new structure suitable for construction of offshore bridge foundations and providing the temporary support for equipments and labour. The platform can be subjected to moment loading due to the eccentric loading or the horizontal load by wave and wind. Therefore, a three dimensional finite element analysis was performed to evaluate the moment bearing capacity of the bucket platform, varying soil density, the diameter and embedment depth of the bucket. The numerical modeling was verified and compared with the moment-rotation curve from a field loading test. The uniform sandy ground was assumed and the moment load was applied at the top plate of the platform, increasing bucket rotation. The moment-rotation relations were analyzed to determine the moment capacity, which was influenced by the embedment depth and diameter of the bucket. Finally, a preliminary design equation was suggested to estimate the moment bearing capacity.

• Journal of the Korea Society for Simulation
• /
• v.29 no.1
• /
• pp.1-9
• /
• 2020

The ballistic missile threat continues to increase with the proliferation of missile technology. In response to this threat, many kinds of interceptors have been emphasized over the years. For development of interceptor, systematic flight tests are essential. Flight tests provide valuable data that can be used to verify performance and confirm the technological progress of ballistic missile defense system including interceptor. However, during flight tests, civilians near the test region could be risk due to a lot of intercept debris. For this reason, reliable estimate of safety area for the flight tests should be preceded. In this study, prediction of safety area is performed through modeling and simulation. Firstly, behaviors of ballistic missile and interceptor are simulated for those entire phase including interception to obtain the relative intercept velocity and the relative impact angle. By using obtained data of kinetic energy, the fragment ejection velocity is calculated and fragment trajectories are simulated by considering drag, gravity and wind effects. Based on the debris field formation and hazard evaluation of debris, final safety area is calculated.

• Atmosphere
• /
• v.25 no.1
• /
• pp.99-115
• /
• 2015

To investigate the influences of the observational nudging and the analysis nudging on the WRF simulation for the heavy snowfall event in Yeongdong area on 26 February 2012, the sensitivity experiments in relation to nudging effects were conducted. We initially set the magnitude of nudging coefficient of $6.0{\times}10^{-4}s^{-1}$ to apply to the analysis nudging experiments and observational experiments. To select the optimized options for the observational nudging, the radius influence experiment was carried out with radii ranging from 10 to 25 km at 5 km intervals. Among the observational nudging experiments, the experiment, which was conducted with the option of the radius influence of 15 km and that of the nudging coefficient of $6.0{\times}10^{-4}s^{-1}$ (ONG exp.), showed a best result. As giving the nudging effect only directly on D1 and D2 brought about a better result for the analysis nudging, we set the analysis nudging experiment as above (ANG exp.). We compared and analyzed the results from the control experiment, ONG experiment, and ANG experiment to reveal nudging effects. It was found that the control experiment brought about a result that it overestimated its precipitation in comparison with the observation and failed to properly simulate the time zone of rainfall concentration. When either of the two nudging (observational and analysis nudging) was applied to the data assimilation, it brought about a better result than the control experiment. Especially the observational nudging led to a meaningful result for the wind field, while the analysis nudging had the best result for the precipitation distribution among the experiments.

• Wind and Structures
• /
• v.27 no.4
• /
• pp.269-282
• /
• 2018

In this paper, a new displacement field based on quasi-3D hybrid-type higher order shear deformation theory is developed to analyze the static and dynamic response of exponential (E), power-law (P) and sigmoïd (S) functionally graded beams. Novelty of this theory is that involve just three unknowns with including stretching effect, as opposed to four or even greater numbers in other shear and normal deformation theories. It also accounts for a parabolic distribution of the transverse shear stresses across the thickness, and satisfies the zero traction boundary conditions at beams surfaces without introducing a shear correction factor. The beam governing equations and boundary conditions are determined by employing the Hamilton's principle. Navier-type analytical solutions of bending and free vibration analysis are provided for simply supported beams subjected to uniform distribution loads. The effect of the sigmoid, exponent and power-law volume fraction, the thickness stretching and the material length scale parameter on the deflection, stresses and natural frequencies are discussed in tabular and graphical forms. The obtained results are compared with previously published results to verify the performance of this theory. It was clearly shown that this theory is not only accurate and efficient but almost comparable to other higher order shear deformation theories that contain more number of unknowns.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.8
• /
• pp.1174-1181
• /
• 2003

The flow around a circular cylinder was controlled by attaching O-rings to reduce drag force acting on the cylinder. Four experimental models were tested in this study; one smooth cylinder of diameter D (D=60mm) and three cylinders fitted with O-rings of diameters d=0.0167 D, 0.05D and 0.067 D with pitches of PPD=2D, 1D, 0.5D and 0.25D. The drag force, mean velocity and turbulence Intensity profiles in the near wake behind the cylinders were measured for Reynolds numbers based on the cylinder diameter in the range of Re$_{D}$=7.8$\times$10$^3$~1.2$\times$10$^{5}$ . At Re$_{D}$=1.2$\times$10$^{5}$ , the cylinder fitted with O-rings of d=0.0167D in a pitch interval of 0.25D shows the maximum drag reduction of about 5.4%, compared that with the smooth cylinder. The drag reduction effect of O-rings of d=0.067D is not so high. For O-ring circulars, as the Reynolds number increases, the peak location of turbulence intensity shifts downstream and the peak magnitude is decreased. Flow field around the cylinders was visualized using a smoke-wire technique to see the flow structure qualitatively. The size of vortices and vortex formation region formed behind the O-ring cylinders are smaller, compared with the smooth cylinder.der.

• Journal of Environmental Health Sciences
• /
• v.24 no.3
• /
• pp.77-86
• /
• 1998

The concentrations of atmospheric dimethylsulfide (DMS) and the relevant environmental parameters were measured as part of the 3rd year project (August 1997-July 1998) to investigate the long range transport of atmospheric pollutants (LRTAP) between China and Korea. The main purpose of this study was to derive the contribution of natural sulfur emissions (represented by oceanic DMS fluxes) in estimating the total budgets of sulfur transported across the Yellow Sea. To this end, DMS concentrations were determined from the two western coastal monitoring sites (Cheju and Kang Hwa islands) during three field intensive experiments covering fall, winter, and spring seasons. From these series of experiments, we found that DMS concentrations of Cheju and Kang Iffwa were averaged at 74 $\pm$ 49.5 (range: 19~282 pptv (N=81)) and 63.7 $\pm$ 35.1 (range:25.8~131 pptv (N=19)), respectively. By combining these 3rd year data with those measured previously from the 2nd year, we were able to derive some general pictures of seasonal distribution patterns of DMS. Although DMS data were difficult to derive relationships with other parameters determined simultaneously, they were rarely exhibiting good correlations with temperature or wind speed. The oceanic flux of DMS for the western coastal regions of Korea, when estimated based on our data from two islands, was found on the range of 8.8~12.2 GgS/yr. By considering the relationship between DMS and non-seasalt sulfate, we could also provide rough estimate of relative significance of natural emissions of sulfur. If oceanic DMS emitted from those regions is entirely converted to sulfate, it could represent 10 to 25% of total sulfur budgets in the western Sea of Korea.