• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 추계학술대회 논문집
• /
• pp.241-246
• /
• 2005

본 연구는 컨테이너 크레인이 강풍에 대비하여 크레인을 고정하는 계류 시에 75m/s의 풍하중이 50ton급 컨테이너 크레인에 작용될 때, 풍향변화와 기계실의 위치 변화가 50ton급 컨테이너 크레인의 구조적 안정성에 미치는 영향을 분석하였다.. 본 연구에 적용된 설계 풍하중은 "건축물 하중 기준"에 의거하여 산출하였으며. 풍향은 $0^{\circ}\~180^{\circ}$를 $15^{\circ}$ 간격으로 적용하여 각 지지점에서의 반력을 분석하였다. 그리고 전체 자중의 $15\%$를 차지하는 기계실의 위치 변화가 컨테이너 크레인의 구조 안정성에 미치는 영향을 분석하였다. 그리고 이 결과들을 바탕으로 컨테이너 크레인의 전도방지장치인 타이다운(Tie-down)의 설계기준을 제시하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 춘계학술대회 및 창립 30주년 심포지엄(논문집)
• /
• pp.349-354
• /
• 2006

본 연구는 풍하중이 컨테이너 크레인에 작용할 때, 풍향에 따라서 컨테이너 크레인의 유동장을 분석하였다. 본 연구를 위해 사용된 모델은 50ton급 컨테이너 크레인으로 현재 항만시설에 가장 많이 사용되는 모델이다. 유동장은 원통으로 모델링하였으며, 직경, 300m 높이 200m로 설정하였다. 본 연구는 멱급수를 적용하여 풍속 50m/s의 설계 기준에서 고도에 따라 풍속을 고려하였다. 또한 풍향은 $0^{\circ}{\sim}180^{\circ}$ 를 $30^{\circ}$ 간격으로 적용하였으며, CFX-10을 사용하여 전산유동해석을 수행하였다. 본 연구에서는 풍향에 따른 풍압력을 분석하였으며, 향후 유동 연성 해석을 통한 컨테이너 크레인의 구조 안정성 평가를 할 것이다.

• 대한기계학회논문집B
• /
• 제20권1호
• /
• pp.255-265
• /
• 1996

Up to the present the study on the performance prediction of HAWT was performed mainly by assuming the axial flow. So in this paper we aimed at the fully non-axial flow of HAWT. For this purpose, we defined the wind turbine pitch angle in addition to the yaw angle to specify the arbitrary wind direction. And we adopted the Glauert method as the basic analysis method then modified this method suitably for our goal. By comparing the computational results obtained by this modified new Glauert method with the experimental results, it was proved that our method was a very efficient method. And on the basis of the reliability of this method we considered the effect of all the design parameters and presented the optimum blade geometry and the optimum operating condition to gain the best performance curve.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.278-281
• /
• 2008

This study demonstrates the advantages of a shear-free structure designed to modify vertical profiles of wind speed in the atmospheric surface layer. Computational fluid dynamics(CFD) software, FLUENT is used to interpret the velocity field modification around the structure and wind turbine. The shapes of shear-free structure, installed at upstream toward prevailing wind direction, would be fences, buildings and trees, etc. According to the simulation results, it is obvious that wind shear between heights of wind turbine's blades is decreased together with a speed-up advantage. This would lead decrease of periodic wind loading caused by wind shear and power-out increase by flow uniformity and wind speed-up.

• 한국환경보건학회지
• /
• 제16권2호
• /
• pp.21-29
• /
• 1990

This study investigated to find out the patterns of the wind direction and wind speeds influenced by concentration of sulfur dioxide in Taegu area for a year in 1988.The results were as follows: Prevailing wind by months where easterly wind from May to September and the other months were westerly and / or west-north-westerly wind. Condition of calm was the most at December(8.6%). Prevailing wind by seasons were westerly and easterly wind in spring and autumn, east-north-easterly and/or west-south wind in summer, the other hand, west-south-westerly and/or west-north-westerly wind in winter. Mean concentration of sulfur dioxide (SO$_{2}$) at each sites were influenced by prevailing wind and location of industrial estates. Mean wind speeds by times were the highest at the before and after 4 P.M.,but the lowest at the before and after 5 A.M. Average wind velocity were highest at Spring (3.38m / sec).

• KIEAE Journal
• /
• 제12권3호
• /
• pp.27-32
• /
• 2012

In recent years, the quality of the outdoor thermal environment has come to be regarded as important as that of the indoor thermal environment. Since the outdoor thermal environment is composed of many elements and is affected by many factors, it is not easy to evaluate the impact of each factor separately. Hence, a comprehensive assessment method is required. In order to evaluate the pedestrian level comfort of an outdoor climate, it is necessary to investigate not only wind velocity but also various physical elements, such as temperature, moisture, radiation, etc. Prediction of wind and thermal environment for a large scale buildings is one of the most important targets for research. Wind and thermal change in a city area is a very complicated phenomenon affected by many physical processes. The purpose of this study is to develop a design plan for wind environment at a large Buildings. In this study, we analyze outdoor wind environment and thermal environment on buildings using the CFD (Computational Fluid Dynamics) method. The arrangement of building models is an apartment in Jeonju. These prediction of wind and thermal environment for a large scale buildings is necessary in a plan before a building is built.

• 한국환경과학회지
• /
• 제14권9호
• /
• pp.851-860
• /
• 2005

In order to how well predict ISCST3(lndustrial Source Complex Short Term version 3) model dispersion of air pollutant at point source, sensitivity was analysed necessary parameters change. ISCST3 model is Gaussian plume model. Model calculation was performed with change of the wind speed, atmospheric stability and mixing height while the wind direction and ambient temperature are fixed. Fixed factors are wind direction as the south wind(l80") and temperature as 298 K(25 "C). Model's sensitivity is analyzed as wind speed, atmospheric stability and mixing height change. Data of stack are input by inner diameter of 2m, stack height of 30m, emission temperature of 40 "C, outlet velocity of 10m/s. On the whole, main factor which affects in atmospheric dispersion is wind speed and atmospheric stability at ISCST3 model. However it is effect of atmospheric stability rather than effect of distance downwind. Factor that exert big influence in determining point of maximum concentration is wind speed. Meanwhile, influence of mixing height is a little or almost not.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.305-310
• /
• 1997

There are many parameters in prediction of forest fire spread. The variables such as fuel moisture, fuel loading, wind velocity, wind direction, relative humidity, slope, and solar aspect have important effects on fire. Particularly, wind and slope factors are considered to be the most important parameters in propagation of forest fire. Generally, slope effect cause different wind distribution in mountain area. However, this effect is disregarded in complex geometry. In this paper, wind is estimated by applying computational fluid dynamics to the forest geometry. Wind velocity data is obtained by using CFD code with Newtonian model and slope is calculated with geometrical data. These data are applied fer 2-dimentional forest fire spreading algorithm with Korean ROS(Rate Of Spread). Finally, the comparison between the simulation and the real forest fire is made. The algorithm spread of forest fire will help fire fighter to get the basic data far fire suppression and the prediction to behavior of forest fire.

• 국제초고층학회논문집
• /
• 제11권4호
• /
• pp.315-320
• /
• 2022

With the rapid development of urbanization the problems of pedestrian-level wind comfort and natural ventilation of tall buildings are becoming increasingly prominent. The velocity at the pedestrian level ($\overline{MVR}$) and variation of wind pressure coefficients $\overline{{\Delta}C_p}$ between windward and leeward surfaces of tall buildings were investigated systematically through numerical simulations. The examined parameters included building density ρ, height ratio of building α_H, width ratio of building α_B, and wind direction θ. The linear and quadratic regression analyses of $\overline{MVR}$ and $\overline{{\Delta}C_p}$ were conducted. The quadratic regression had better performance in predicting $\overline{MVR}$ and $\overline{{\Delta}C_p}$ than the linear regression. $\overline{MVR}$ and $\overline{{\Delta}C_p}$ were optimized by the NSGA-II algorithm. The LINMAP and TOPSIS decision-making methods demonstrated better capability than the Shannon's entropy approach. The final optimal design parameters of buildings were ρ = 20%, α_H = 4.5, and α_B = 1, and the wind direction was θ = 10°. The proposed method could be used for the optimization of pedestrian-level wind comfort and natural ventilation in a residential area.

• Wind and Structures
• /
• 제26권6호
• /
• pp.355-367
• /
• 2018

This paper studies the aerodynamic stability of a tensioned, geometrically nonlinear orthotropic membrane structure with hyperbolic paraboloid in sag direction. Considering flow separation, the wind field around membrane structure is simulated as the superposition of a uniform flow and a continuous vortex layer. By the potential flow theory in fluid mechanics and the thin airfoil theory in aerodynamics, aerodynamic pressure acting on membrane surface can be determined. And based on the large amplitude theory of membrane and D'Alembert's principle, interaction governing equations of wind-structure are established. Then, under the circumstance of single-mode response, the Bubnov-Galerkin approximate method is applied to transform the complicated interaction governing equations into a system of second-order nonlinear differential equation with constant coefficients. Through judging the frequency characteristic of the system characteristic equation, the critical velocity of divergence instability is determined. Different parameter analysis shows that the orthotropy, geometrical nonlinearity and scantling of structure is significant for preventing destructive aerodynamic instability in membrane structures. Compared to the model without considering flow separation, it's basically consistent about the divergence instability regularities in the flow separation model.