• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.745-750
• /
• 2007

This paper presents investigation of topographic effects over isolated 3-dimensional hills through wind tunnel experiments in a boundary layer wind tunnel. Topographic models having five different slopes of $5.71^{\circ},\;11.31^{\circ},\;16.70^{\circ},\;21.80^{\circ}$, and $26.57^{\circ}$, which were based on KBC(2005), were taken into account in the study. The maximum topographic factor and the range of topographic effect from the experiment were compared with those from worldwide major codes and standards, such as ASCE-7-02, AS/NZS-1170.2:2002, ISO4354(1997), and KBC(2005). From the comparison of major codes and standards, in the vertical region of topographic effect, the gentler the slope was. the more different the topographic factors and ranges of topographic effect were, but the steeper the slope was, the more similar they were. It was found from the experimental study that the region of topographic effect in the slope in the across wind direction was greater than the regions of major codes and standard. Also, the gentler the slope was. the larger the topographic factor from the experiment was than the factors of major codes and standards.

• Wind and Structures
• /
• 제35권5호
• /
• pp.323-336
• /
• 2022

This study investigates the applicability of the direct identification of flutter derivatives in the time domain using Rational Function Approximation (RFA), where the extraction procedure requires either a combination of at least two wind speeds or one wind speed. In the frequency domain, flutter derivatives are identified at every wind speed. The ease of identifying flutter derivatives in the time domain creates a paradox because flutter derivative patterns sometimes change in higher-order polynomials. The first step involves a numerical study of RFA extractions for different deck shapes from existing bridges to verify the accurate wind speed combination for the extraction. The second step involves validating numerical simulation results through a wind tunnel experiment using the forced vibration method in one degree of freedom. The findings of the RFA extraction are compared to those obtained using the analytical solution. The numerical study and the wind tunnel experiment results are in good agreement. The results show that the evolution pattern of flutter derivatives determines the accuracy of the direct identification of RFA.

• Wind and Structures
• /
• 제5권2_3_4호
• /
• pp.165-176
• /
• 2002

Results of measurements of surface pressure and of velocity field made on a full-scale 6 m cube in natural wind are reported. Comparisons are made with results from boundary-layer wind-tunnel studies reported in the literature. Two flow angles are reported; flow normal to a face of the cube (the $0^{\circ}$ case) and flow at $45^{\circ}$. In most comparisons, the spread of wind-tunnel results of pressure measurements spans the full-scale measurements. The exception to this is for the $0^{\circ}$ case where the roof and side-wall pressures at full-scale are more negative, and as a result of this the leeward wall pressures are also lower. The cause of this difference is postulated to be a Reynolds Number scale effect that affects flow reattachment. Measurements of velocity in the vicinity of the cube have been used to define the mean reattachment point on the roof centre line for the $0^{\circ}$ case, and the ground level reattachment point behind the cube for both $0^{\circ}$ and $45^{\circ}$ flow. Comparisons are reported with another full-scale experiment and also with wind-tunnel experiments that indicate a possible dependency on turbulence levels in the approach flow.

• 한국항공우주학회지
• /
• 제32권8호
• /
• pp.129-137
• /
• 2004

본 연구에서 시험부 크기 $30mm{\times}35.6mm$, Run Time 20초인 소형-저가의 초음속 풍동을 개발하였다. 개발원 교육용 초음속 풍동은 단속적 불어내기식형이며 , 노즐 블록 교체형으로 설계되었다. 본 연구를 통하여 초음속 풍동에 사용되는 대형-고가의 기계장비를 기존 소형의 상용 제품으로 대체하여 제작 단가를 낮추었다. 그리고 초음속 풍동의 핵심 기술인 노즐 설계를 비롯한 전체적인 초음속 풍동 설계 기술을 확보하였다. 풍동 시험부에서의 초음속 유동장 형성 및 유동 안정성에 대한 성능검증 실험을 수행하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 춘계학술대회 및 창립 30주년 심포지엄(논문집)
• /
• pp.311-316
• /
• 2006

본 연구는 75m/s의 풍하중이 컨테이너 크레인에 작용할 때, 붐 형상 변화에 따라 풍하중이 컨테이너 크레인의 구조적 안정성에 미치는 영향을 풍동실험을 통하여 분석하여 컨테이너 크레인의 내풍설계 시 필요한 자료를 제공하기 위해 수행되었다. 풍동실험에 적용된 데이터 수집조건은 상사법칙에 준하여 설정되었으며, 컨테이너 크레인 모형, 풍속 및 시간의 축척률은 각각 1/200, 1/13.3 및 1/15로 하였다. 그리고 실험은 $11.25m^2$의 측정부 단면을 갖는 개방형 대기경계층풍동을 사용하여 수행하였다. 풍향에 따른 컨테이너 크레인의 풍력계수 및 전도모멘트계수가 조사되었으며, 풍하중에 의해 각 지지점에서 발생되는 전도력이 분석되었다.

• Wind and Structures
• /
• 제4권3호
• /
• pp.261-276
• /
• 2001

This paper presents an experimental study on the effectiveness of viscous-damping walls in controlling the wind-induced vibrations of a building model. A simple four-story building model, square in plan, was constructed for wind tunnel study. In this paper the description of the model, its instrumentation, and the experimental set-up and methodology are reported. The effectiveness of viscous-damping walls in reducing vibrations was investigated for different fluid levels in the walls, and at varying wind speeds and attack angles. The results show that viscous-damping walls are highly effective in most cases.

• 한국화재소방학회논문지
• /
• 제7권2호
• /
• pp.3-12
• /
• 1993

The closed type sprinkler head is a component of sprinkler system for fire protection. The purpose of this study is to inverstigate the influence factors of the responsiveness of the head by heated wind tunnel experiment. As the result of this study, it was found that response time index and conduction parameter showed the same characteristic quantitative changes to head types and test methods.

• 대한조선학회논문집
• /
• 제48권2호
• /
• pp.165-170
• /
• 2011

In this paper, wind force coefficient by wind tunnel experiment is obtained to compute the accurate wind force of the gantry crane model to be used for mobile harbor ship. The first crane model was tested under 20, 30, 40, 52m/s, partially 58m/s and the wind force coefficient is about 2.0 which is very close to the suggested theoretical value. The other is the more reliable crane model and tested under 20, 30, 40m/s also giving the similar realistic wind force coefficient. Also structural analysis of crane model was performed giving the reliable stress level. Since the rolling effect is important for mobile harbor ship, the safety of the crane on the ship needs to be guaranteed. For this, using the computed reaction forces, a tie-down design is suggested which connects the crane and ship to resist the turnover motion of the crane.

• 터널과지하공간
• /
• 제24권4호
• /
• pp.308-315
• /
• 2014

본 연구에서는 도로터널 화재 시 외부 바람에 의한 영향을 평가하기 위하여 축소모형 실험을 실시하였다. $1.1m{\times}0.5m{\times}50.4m$ 모형 터널에서 휘발유 4.5리터를 사용하여 실험을 실시하였다. 터널 내부의 온도, 산소와 일산화탄소 농도를 측정하였다. 외부 바람의 영향에 따라 연기의 출구 도달 시간에 차이를 보였다. 최성기 이후에는 외부 바람의 영향이 초기에 비하여 작은 것을 확인할 수 있었다. 화재로 인하여 발생한 일산화탄소가 1,500 ppm 이상 도달하여 피난자에게 치명적인 위해를 가할 수 있다.

• 대한기계학회논문집B
• /
• 제20권11호
• /
• pp.3695-3705
• /
• 1996

We designed the hot wind tunnel to reproduce the conditions of utility boiler and carried out its performance test, in order to investigate the particulate two-phase flow behaviour, the fouling and heat transfer characteristics to the heat exchanger. The hot wind tunnel introduces the control system to control the temperature in the test section. The particle is injected into the hot gas stream. The fouling probe (cylindrical tube) is positioned normal to the particulate gas-particle two-phase flow and cooled by the air. The temperature of gas and cooling air, and temperature in the fouling probe are measured as a function of time, giving the local and averaged heat transfer and fouling factor. The shape of particulate deposition adhered to the fouling probe is also observed.