• 제목/요약/키워드: Wind Speed Data

검색결과 1,213건 처리시간 0.031초

Interpolation을 이용한 3-CUP Anemometer의 성능 개선에 관한 연구 (The Study of Performance Improvement of the 3-Cup Anemometer using Interpolation Methods)

  • 이성신;정택식;구법모
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2001년도 춘계종합학술대회
    • /
    • pp.672-675
    • /
    • 2001
  • 본 논문에서 Interpolation Methods를 이용하여 보다 정화한 풍속을 계산하는 방법과 보다 정확한 풍향을 계산하기 위하여 Interpolation Polynomial을 찾는 방법을 제안하였고, 이렇게 제안된 방법을 이용하여 3-Cup Anemometer의 성능을 개선하였다. 우리는 풍향, 풍속의 관측을 위해 기구부는 3-cup Type Anemometer로, 전자부는 Photo Sensor를 이용하여 구현하였다. 정확한 풍속과 풍향의 측정을 위해서는 시스템의 메모리 한계 및 성능을 고려한 시스템 설계와 8비트 Gray Code Film으로 256(= 2$^{8}$ )개의 각도 Data로 360$^{\circ}$를 표현하는 방법이다.

  • PDF

가변속 동기형 풍력발전 시스템 모델링 및 운전제어에 대한 연구 (A Study on the modeling and operation control of a variable speed synchronous wind power system)

  • 허현;이재학
    • 한국전자통신학회논문지
    • /
    • 제10권8호
    • /
    • pp.935-944
    • /
    • 2015
  • 본 논문에서는 가변속 풍력발전시스템의 동적 모델링과 운전제어 시뮬레이션을 수행하였다. 풍속모델, 풍력터빈과 PMSG 모델, MPPT 및 피치 운전제어 모델 등을 구현하였다. 그리고 상용화된 5MW급 풍력터빈 데이터들을 참고하여 실제적인 시스템과 유사한 출력계수 및 가상 운전 조건으로 시뮬레이션 하였다. 시뮬레이션 결과 정격속도 12[m/s]까지 최대출력계수를 유지하면서 최대전력추종을 확인하였다. 또한 12[m/s]이상의 고속 풍속에서는 동적으로 피치 각도를 제어하면서, 정격상태의 안정적인 출력을 유지하였다.

저층 트롤선의 예망 시 기관출력에 영향을 미치는 저항들에 관한 고찰 (A study on the resistance affecting on the engine power in towing fishing gear of a bottom trawl ship)

  • 왕우경
    • 수산해양기술연구
    • /
    • 제59권4호
    • /
    • pp.344-353
    • /
    • 2023
  • In the actual sea, the additional resistance due to external force such as wind, current and wave is accompanied, and the required power is added in response to these resistance. Especially when the ship is sailing at low speed, the effects of wind and current have a great impact on the safe control of the ship. Likewise, it is thought that the effects of wind and current have a great impact on the trawl ship control since the towing speed of a bottom trawl ship is a low speed of 3 to 4 knots. If the reduce of ship speed and the increase of engine power due to the influence of wind and current can be identified, the safe towing power can be calculated based on a given engine output. Thus, the appropriate size of a fishing gear can be determined. In this study, a total of 20 trawl operations were conducted for seasonal maritime research in the same research area according to the operation mode of propeller. Based on navigation data, trawl fishing data, and engine performance data acquired during the towing fishing gear, and data of ship speed, hull resistance, fishing gear resistance, wind force and current force according to an incidence angle were estimated. The overall power for these loads was calculated and compared with the measured engine power, and the effects of wind force and current force on the engine power were investigated.

위성원격탐사를 활용한 해양표면 바람장 자료 분석 (Analyses on the sea surface wind field data by satellite remote sensing)

  • 윤홍주
    • 한국정보통신학회논문지
    • /
    • 제12권1호
    • /
    • pp.149-157
    • /
    • 2008
  • SAR의 마이크로파를 이용하면 악기상환경 및 주야간에도 해양의 관측이 가능하다. SAR의 해양표면에 대한 영상은 표면바람장과 관련된 대기 현상에 관한 많은 정보를 가지고 있다. SAR로부터 추출되는 풍속의 정보는 다양하게 이용된다. SAR 영상으로부터 해상풍을 산출하기 위해서는 바람산출모델에 SAR 영상으로부터 추출한 풍향 자료와 후방산란계수 값을 입력하여 풍속을 산출한다. 이 때 풍속은 CMOD5 모델에 풍향의 값을 적용하여 추할 수 있다. CMOD5 모델에 사용할 Azimuth angle 값은 SAR 자료로부터 구해지는 Look angle 값에 $90^{\circ}$를 더 함으로써 구해진다. SAR 영상으로부터 구한 파향 스펙트럼 은 항상 파향에 있어서 $180^{\circ}$의 상반된 두 정점을 보여주는데 이는 영상에 적용한 2차원 FPT의 결과이다. 파향에 있어서의 이러한 모호성은 육지의 위치라든지, 바람의 방향 혹은 수치모델 결과 등을 이용하여 결정하여야 한다. 이러한 2D-FFT를 통해 구해진 풍향은 실측자료와 $3^{\circ}{\sim}7^{\circ}$ 정도의 차이를 나타내고 있다. CMOD5 모델을 통해 얻어진 풍속의 값은 각각 실측자료와 2m/s 이하의 유사한 값들을 나타냈다.

Analysis of hurricane directionality effects using event-based simulation

  • Huang, Zhigang;Rosowsky, David V.
    • Wind and Structures
    • /
    • 제3권3호
    • /
    • pp.177-191
    • /
    • 2000
  • This paper presents an approach for evaluating directionality effects for both wind speeds and wind loads in hurricane-prone regions. The focus of this study is on directional wind loads on low-rise structures. Using event-based simulation, hurricane directionality effects are determined for an open-terrain condition at various locations in the southeastern United States. The wind speed (or wind load) directionality factor, defined as the ratio of the N-year mean recurrence interval (MRI) wind speed (or wind load) in each direction to the non-directional N-year MRI wind speed (or wind load), is less than one but increases toward unity with increasing MRI. Thus, the degree of conservatism that results from neglecting directionality effects decreases with increasing MRI. It may be desirable to account for local exposure effects (siting effects such as shielding, orientation, etc.) in design. To account for these effects in a directionality adjustment, the factor described above for open terrain would need to be transformed to other terrains/exposures. A "local" directionality factor, therefore, must effectively combine these two adjustments (event directionality and siting or local exposure directionality). By also considering the direction-specific aerodynamic coefficient, a direction-dependent wind load can be evaluated. While the data necessary to make predictions of directional wind loads may not routinely be available in the case of low-rise structures, the concept is discussed and illustrated in this paper.

고해상도 규모상세화 수치자료 산출체계를 이용한 남한의 풍력기상자원 특성 분석 (Analyses of the Meteorological Characteristics over South Korea for Wind Power Applications Using KMAPP)

  • 윤진아;김연희;최희욱
    • 대기
    • /
    • 제31권1호
    • /
    • pp.1-15
    • /
    • 2021
  • High-resolution wind resources maps (maps, here after) with spatial and temporal resolutions of 100 m and 3-hours, respectively, over South Korea have been produced and evaluated for the period from July 2016 to June 2017 using Korea Meteorological Administration (KMA) Post Processing (KMAPP). Evaluation of the 10 m- and 80 m-level wind speed in the new maps (KMAPP-Wind) and the 1.5 km-resolution KMA NWP model, Local Data Assimilation and Prediction System (LDAPS), shows that the new high-resolution maps improves of the LDAPS winds in estimating the 10m wind speed as the new data reduces the mean bias (MBE) and root-mean-square error (RMSE) by 33.3% and 14.3%, respectively. In particular, the result of evaluation of the wind at 80 m which is directly related with power turbine shows that the new maps has significantly smaller error compared to the LDAPS wind. Analyses of the new maps for the seasonal average, maximum wind speed, and the prevailing wind direction shows that the wind resources over South Korea are most abundant during winter, and that the prevailing wind direction is strongly affected by synoptic weather systems except over mountainous regions. Wind speed generally increases with altitude and the proximity to the coast. In conclusion, the evaluation results show that the new maps provides significantly more accurate wind speeds than the lower resolution NWP model output, especially over complex terrains, coastal areas, and the Jeju island where wind-energy resources are most abundant.

Improving Forecast Accuracy of Wind Speed Using Wavelet Transform and Neural Networks

  • Ramesh Babu, N.;Arulmozhivarman, P.
    • Journal of Electrical Engineering and Technology
    • /
    • 제8권3호
    • /
    • pp.559-564
    • /
    • 2013
  • In this paper a new hybrid forecast method composed of wavelet transform and neural network is proposed to forecast the wind speed more accurately. In the field of wind energy research, accurate forecast of wind speed is a challenging task. This will influence the power system scheduling and the dynamic control of wind turbine. The wind data used here is measured at 15 minute time intervals. The performance is evaluated based on the metrics, namely, mean square error, mean absolute error, sum squared error of the proposed model and compared with the back propagation model. Simulation studies are carried out and it is reported that the proposed model outperforms the compared model based on the metrics used and conclusions were drawn appropriately.

Speed-Power Performance Analysis of an Existing 8,600 TEU Container Ship using SPA(Ship Performance Analysis) Program and Discussion on Wind-Resistance Coefficients

  • Shin, Myung-Soo;Ki, Min Suk;Park, Beom Jin;Lee, Gyeong Joong;Lee, Yeong Yeon;Kim, Yeongseon;Lee, Sang Bong
    • 한국해양공학회지
    • /
    • 제34권5호
    • /
    • pp.294-303
    • /
    • 2020
  • This study discusses data collection, calculation of wind and wave-induced resistance, and speed-power analysis of an 8,600 TEU container ship. Data acquisition system of the ship operator was improved to obtain the data necessary for the analysis, which was accomplished using SPA (Ship Performance Analysis, Park et al., 2019) in conformation with ISO15016:2015. From a previous operation profile of the container, the standard operating conditions of mean draft were 12.5 m and 13.6 m, which were defined with the mean stowage configuration of each condition. Model tests, including the load-variation test, were conducted to validate new ship performance and for the speed-power analysis. The major part of the added resistance of container ship is due to the wind. To check the reliability of wind-resistance calculation results, the resistance coefficients, added resistance, and speed-power analysis results using the Fujiwara regression formula (ISO15016:2015) and Computational fluid dynamics (Ryu et al., 2016; Jeon et al., 2017) analysis were compared. Wind speed and direction measured using an anemometer were used for wind-resistance calculation and the wave resistance was calculated using the wave-height and direction-data from weather information. Also, measured water temperature was used to calculate the increase in resistance owing to the deviation in water density. As a result, the SPA analysis using measured data and weather information was proved to be valid and able to identify the ship's resistance propulsion performance. Even with little difference in the air-resistance coefficient value, both methods provide sufficient accuracy for speed-power analysis. The differences were unnoticeable when the speed-power analysis results using each method were compared. Also, speed-power analysis results of the 8,600 TEU container ship in two draft conditions show acceptable trends when compared with the model test results and are also able to show power increase owing to hull fouling and aging. Thus, results of speed-power analysis of the existing 8,600 TEU container ship using the SPA program appropriately exhibit the characteristics of speed-power performance in deal conditions.

태풍 시뮬레이션을 통한 서남해안의 극한풍속 예측 (Estimation of Extreme Wind Speeds in Southern and Western Coasts by Typhoon Simulation)

  • 권순덕;이재형
    • 대한토목학회논문집
    • /
    • 제28권4A호
    • /
    • pp.431-438
    • /
    • 2008
  • 본 연구에서는 열대성 저기압에 의하여 지배를 받는 우리나라 서남해안의 풍속을 추정하기 위한 개선된 태풍 몬테카를로 시뮬레이션 방법을 제시하였다. 이를 위하여 적절한 태풍의 물리적 모델을 제시하고 실측치와 비교하여 검증하였다. 아울러 태풍을 구성하는 파라메터의 확률분포 모델을 제시하고 우리나라 인근을 통과한 태풍자료를 사용하여 적합성을 검사하였다. 본 연구의 방법으로 서남해안 주요 지점의 재현기간별 풍속을 추정하여 제시하였는데, 위도가 낮아질수록 풍속이 높아지며, 도로교설계기준의 기본풍속은 과다한 것으로 나타났다.

대관령 풍력단지의 풍력발전량 및 경제성 분석 (A Study on the Wind rower Generation and Its Economic Feasibility at Daekwanryung)

  • 하정우;김수덕
    • 에너지공학
    • /
    • 제14권2호
    • /
    • pp.123-132
    • /
    • 2005
  • 본 논문은 현재 건설 중인 대관령 풍력발전 단지의 풍력 발전 관련 풍속의 분포 및 풍력 발전량을 검토하고, 대관령 풍력 발전의 경제성을 분석하였다. 풍력발전에 있어 풍속의 분포가 핵심요소이고, 풍속분포는 shape factor및 scale factor로 구성되는 Weibull 분포함수로 일반적으로 표현되나, 실제 풍속 분포자료를 조사하여 최적의 계수를 도출, 연간 풍력 발전량을 구하였다. 풍력발전 시설의 초기투자비 및 유지관리 비용은 국내 자료를 이용코자 하였으나, 관련 자료의 확보에 어려움이 있어 유럽풍력협회의 자료(EWEA, 2003. 12)를 적용하였다. 결과는 현재 발전차액제도를 통해 보전되는 풍력에너지의 적정한 기준가격을 마련하는데 유익한 정보를 제공한다.