• Journal of the Korean earth science society
• /
• v.33 no.4
• /
• pp.309-319
• /
• 2012

In order to clarify the characteristics of satellite based sea wind data assimilations applied for the estimation of wind resources around the Korean peninsula, several numerical experiments were carried out using WRF. Satellite sea wind data used in this study are QuikSCAT from NASA and ASCAT from ESA. When the wind resources are estimated with data assimilation, its estimation accuracy is improved clearly. Since the band width is broad for QuikSCAT, statistical accuracy of the estimated wind resources with QuikSCAT assimilations is better than that with ASCAT assimilations. But the wind estimated around sub-satellite point matches better with of ASCAT compared to QuikSCAT assimilation. The impact of sea wind data assimilation on the prediction of wind resources lasts for 6 hours after data assimilation starts, therefore the data assimilation processes using both fine spatial and temporal resolutions of sea wind are needed to make a more useful wind resource map of the Korean Peninsula.

• The Korean Journal of Applied Statistics
• /
• v.24 no.6
• /
• pp.1225-1235
• /
• 2011

This paper suggests a method for tuning a numerically simulated wind speed data, provided by NIMR(National Institute of Meteorological Research) and generated from a numerical meteorological model to improve a wind resource map with a $1Km{\times}1Km$ resolution. To this end, "tuning factor method" is developed that consists of two procedures. First, estimate monthly wind fields based on a suitably designed statistical wind field model that covers 345,682 regions obtained by $1Km{\times}1Km$ lattice sites in South Korea. The second procedure computes the tuning factor and then tunes the generated wind speeds of each month as well as each lattice site. The second procedure is based on the wind fields estimated by the first procedure. The performance of the suggested tuning method is demonstrated by using two wind data(both TMY and numerically simulated wind speed data) of 75 weather station areas.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.3
• /
• pp.146-152
• /
• 2012

To install a wind power generator, the survey on the wind environment resources must be conducted in advance. The survey on the wind environment resources is to collect and analyze data regarding the wind speed and direction on a data logger. The data logger consists of a sensor, signal processing circuit and storage device. According to the analysis of the stored data, the amount of power generation by the types of generators can be predicted and the most optimal generator including safety grade can be selected, and in case of installing a generator in the future, it can be utilized as basic data regarding supporting base and foundation construction method of survey points. Data logger was developed for a small wind power generator that is suitable for the international standard(IEC 61400) by using DSP-F28335 micro controller in this paper. It was developed to measure the wind speed of 1 [m/s]~17 [m/s], the wind direction of 0 [$^{\circ}$]~359 [$^{\circ}$], and temperature of -30 [$^{\circ}C$]~50 [$^{\circ}C$], and the comparative experiment with other companies' data loggers was conducted, and an error was measured to be less than ${\pm}0.1$ [m/s] for wind speed and less than +1 [$^{\circ}$] for wind direction.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.3
• /
• pp.45-52
• /
• 2008

In order to clarify characteristics of variation in wind energy over a long-term period, an investigation was carried out at Seoguang site on Jeju island. The wind data for 10 years from Automatic Weather System (AWS) were analyzed for each year. The variation in the annual energy production (AEP) for the 2 MW wind turbine was estimated through statistical work. The result shows that the range of the yearly average wind speed at 15 m above ground level for 10 years was from -22.6% to +13.7%, which is wider range than that in Japan. The coefficient of variation for the AEP was 22.7%, which is about twice of that for the yearly average wind speed. Therefore, for estimating the wind energy potential accurately at a given site, the wind data should be analyzed over a long-term period based on the data from the meteorological station.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.9
• /
• pp.735-742
• /
• 2015

In this paper, we compare and verify the prediction accuracy and feasibility for wind resources on a wind farm using the Weather Research and Forecasting (WRF) model, which is a numerical weather-prediction model. This model is not only able to simulate local weather phenomena, but also does not require automatic weather station (AWS), satellite, or meteorological mast data. To verify the feasibility of WRF to predict the wind resources required from a wind farm pre-feasibility study, we compare and verify measured wind data and the results predicted by WAsP. To do this, we use the Pyeongdae and Udo sites, which are located on the northeastern part of Jeju island. Together with the measured data, we use the results of annual and monthly mean wind speed, the Weibull distribution, the annual energy production (AEP), and a wind rose. The WRF results are shown to have a higher accuracy than the WAsP results. We therefore confirmed that WRF wind resources can be used in wind farm pre-feasibility studies.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.4
• /
• pp.201-212
• /
• 2016

A Wind resource assessment and optimal micrositing of wind turbines were implemented for the development of an onshore wind farm of 30 MW capacity on Gadeok Island in Busan, Republic of Korea. The wind data measured by the automatic weather system (AWS) that was installed and operated in the candidate area were used, and a reliability investigation was conducted through a data quality check. The AWS data were measured for one year, and were corrected for the long term of 30 years by using the modern era retrospective analysis for research and application (MERRA) reanalysis data and a measure- correlate-predict (MCP) technique; the corrected data were used for the optimal micrositing of the wind turbines. The micrositing of the 3 MW wind turbines was conducted under 25 conditions, then the best-optimized layout was analyzed with a various wake model. When the optimization was complete, the estimated park efficiency and capacity factor were from 97.6 to 98.7 and from 37.9 to 38.3, respectively. Furthermore, the annual energy production (AEP), including wake losses, was estimated to be from 99,598.4 MWh to 100,732.9 MWh, and the area was confirmed as a highly economical location for development of a wind farm.

• Journal of the Korean Solar Energy Society
• /
• v.25 no.1
• /
• pp.79-86
• /
• 2005

The external conditions for estimating dynamic wind loads of wind turbines, such as the turbulence, the extreme wind, the mean velocity gradients and the flow angles, are simulated over GangWon Wind Energy Test Field placed in one of the most complex terrain in Korea. Reference meteorological data has been gathered at a height of 30m from 2003 to 2004 with a ultrasonic anemometer. The absolute value of the spectral energy are simulated and the verification of this prediction has been carried out with comparing to the experimental data. The most desirable place for constructing new wind turbine are resulted as Point 2 and Point 3 due to the lower value of Turbulence Intensity and the higher value of wind resource relatively.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.2
• /
• pp.35-41
• /
• 2003

In order to investigate the offshore wind resources around Korean peninsula, the "QuikSCAT Level 3" data by ADEOS II satellite was analyzed from Jan 1 2000 to Jan 18 2003. The "SeaWinds" on the satellite is a specialize4 device for microwave scatterometery that measures near-surface wind speed and direction under all weather and cloud conditions. Wind speed are extrapolated from 10m to 60m with the exponent of 1/10 in the power law model. It has been found that the High wind energy potentials are prevailing in the South sea and Southeastern end of Korean peninsula.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.532-533
• /
• 2009

The national wind map of South Korea has been established as a core data to support national strategy building and promotion of wind energy dissemination. The national wind map has been made by numerical wind simulation with the spatial resolution of 1 km horizontal, 10m vertical and temporal resolution of 1 hour interval for 5 years period (2003-2007). Therefore, an application system linked with the national wind map named KIER-WindMap$^{TM}$ is being developed to be used by the government, local government, developers and researchers. We introduce the current status of the application system and the future development plans.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.4
• /
• pp.46-50
• /
• 2013

This paper investigated wind turbine degradation quantitatively by analyzing the short-term operation records of the Shinan Wind Power Plant. Instead of a capacity factor which is needed to be normalized its variability due to monthly wind speed change, this study suggests an analysis method by taking the difference between the theoretical power output calculated from the nacelle wind speed and actual power output as the quantitative index of performance degradation. For three-year SCADA data analysis of the Shinan Wind Power Plant, it was confirmed that power output degradation rate of 0.54% per year. This value is within the average reduction rate 0.4%/year~0.9%/year of normalized capacity factor of the onshore wind power plants in U.K. and Denmark; however, lower than the rate 2%/year of Canadian wind power plants.