• Journal of Advanced Marine Engineering and Technology
• /
• 제23권5호
• /
• pp.637-653
• /
• 1999

In this study well-known burned rate expressions of Weibe function and double Wiebe function have been adopted for the combustion analysis of large two stroke marine diesel engine. A cycle simulation program was also developed to predict the performance and pressure waves in pipes using validated burned rate function,. Levenberg-Marquardt iteration method was applied to cali-brate the shape coefficients included in double Wiebe function for the performance prediction of two-stroke marine diesel engine. As a result the performance prediction using double Wiebe func-tion is well correlated withexperimental dta with the accuracy of 5% and pressure waves in intake and transport pipe are well predicted. From the results of this study it can be confirmed that the shape coefficients of burned rate function should be modified using the numerical method suggested for the accurated prediction and double Wiebe function is more suitable than Wiebe func-tion for combustion analysis of large two stroke marine engine.

• 대한기계학회논문집
• /
• 제16권10호
• /
• pp.1928-1939
• /
• 1992

본 연구에서는 흡.배기관내에서의 상태변화를 계산하기 위하여 벽면과의 마찰 과 열전달, 단면적 및 엔트로피 변화를 고려하는 일반화된 특성곡선법을 채택하여 관 내 각 위치에서의 크랭크각에 따른 상태량의 변화를 계산하였으며, 실린더내의 연소과 정은 예혼합연소와 확산연소 각각을 나타내는 Wiebe의 연소함수를 조합한 Double Wie- be's Function을 이용하여 열발생률을 계산하였다.

• 대한기계학회논문집
• /
• 제9권5호
• /
• pp.548-554
• /
• 1985

본 논문에서는 디이젤기관의 연소소음의 저감을 최종목표로 하여 Wiebe의 연 소함수에 의해 근사시킨 열발생속도의 변화가 디이젤기관의 연소소음 및 도시열효율에 미치는 영향에 관하여 수치실험을 통하여 해석검토하였다.

• 오토저널
• /
• 제11권1호
• /
• pp.31-43
• /
• 1989

제2보 (2)에서는 식물유를 연료로 사용할 경우 문제점인 시동성, 내구성 및 카본생성을 억제하기 위하여 물리적인 방법으로 해결책을 모색하였다. 그러나, 본 연구는 기관자체는 전혀 변형시키지 않고, 점도저감을 위하여 화학적인 방법 즉, 식물유를 알콜과 반응시켜 에스테르변 환을 하여 해결하려는 방법으로, 에스테르화한 연료를 사용하였을 때의 기관성능 및 카본 퇴적 문제를 비교, 시험한 것이다. 또, 기름이 식물유와 같이 지방산으로 이루어져 있다면, 어느 기름도 에스테르 변환이 가능하기 때문에, 생선기름인 정어리기름의 에스테르연료도 사용하여 그 이용 가능성을 확실히 하였다. 또한, 각종 연료의 연소성에 관하여 보다 상세한 검토를 하기 위하여, 이들의 연소율 파형을 2개의 Wiebe의 연소함수의 조합으로 표현함과 동시에 연소율 파형을 구성하는 각 변수를 해석함으로써, 기관성능치와 연소성과의 정량적인 관계에 대해서도 조사한 것이다.

• 한국자동차공학회논문집
• /
• 제4권2호
• /
• pp.221-229
• /
• 1996

The engine speed fluctuation at idle operation mainly comes from cyclic variation of combustion in SI engine. In the present study, engineering model that is representing the cyclic variation of combustion was proposed for the sub-model of the engine cycle simulation. From the observed behaviors of the mass burn rates, probability density functions for the parameters of Wiebe function were defined. The mass burn rate of each cycle is obtained by Monte Cralo perturbation method with the probability function. The simulation results shows that trends of cylinder pressure variation and imep distribution follow up with those of experimental results at idle condition.

• 한국대기환경학회지
• /
• 제2권1호
• /
• pp.91-101
• /
• 1986

Relations of each factor affected by emissions and the prediction of performance have been analyzed numerically by cycle simulation in the Spark Ignition Engine. Through theoretical analysis and experiments, the results are obtained as below. The calculated results and the experimental ones are almost highly agreeable on cycle simulation model, exhaust gas analysis and efficiency for processes in cylinder. Therefore this model is proved appropriate and can be useful for optimum design of Spark Ignition Engines on parametric studies. It is reaffirmed that the Wiebe's function is suitable for predicting Combustion Ration in Spark Ignition Engines. On parametric studies, it is found that optimum conditions whose density of emissions are lower and efficiency is maximum within propriety value are crankangle ATDC $15^\circ-20^\circ$, 2400 rpm. A/F=16 in this experiment.

• 한국자동차공학회논문집
• /
• 제1권1호
• /
• pp.80-89
• /
• 1993

Performance simulation for a Spark Ignition Wankel rotary Engine is presented in this paper. The volume of chamber at each eccentric shaft angle is evaluated by using geometric models of housing and rotor. A thermodynamic model which includes the first law of thermodynamics, combustion and convective heat transfer from chamber contents to surroundings is imployed. A thermochemical equilibrium model which considers 10 species(CO, $CO_2$, $O_2$, $H_2$, $H_2O$, OH, O, NO, $N_2$) in the burned gas region, is also employed. Four processes of gas exchange, compression, combustion and expansion are considered and the pressure, temperature and composition of chamber gas at each eccentric shaft angle in each process are computed in this performance simulation. This performance simulation must be useful for optimal design of Spark Ignition Wankel Rotray Engine with parametric study for various design parameters and operating conditions.

• 한국자동차공학회논문집
• /
• 제18권3호
• /
• pp.26-36
• /
• 2010

This paper provides a description of the combustion model to obtain an accurate dynamic engine phenomena that satisfies real-time simulation for model-based engine control. The combustion chamber is modeled as a storage device for mass and energy. The combustion process is modeled in terms of a two-zone model for the burned and unburned gas fractions. The mass fraction burnt is modeled in terms of a Wiebe function. The instantaneous net engine torque is calculated from the engine speed and the instantaneous piston work. The modeling accuracy has been tested with a cylinder pressure data on a test bench and also the ability of real-time simulation has been checked. The results show that combustion model yields sufficiently good performance for the model-based control logic design. However the influence factors effected on model accuracy are some room for improvement.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권2호
• /
• pp.97-103
• /
• 1994

This paper describes briefly the simulation program for predicting the performance of a high speed turbocharged four cycle diesel engine. The wave phenomena in the intake and exhaust systems are calculated by the characteristic method. The combustion process in the power cycle is represented by the heat release pattern which is given by the Wiebe's function or the pattern based on measured values. Turbocharger matching for the engine is described by utilizing the characteristic maps of both the compressor and turbine, which are obtained from quasi-steady states. A comparison of experimental and calculated results shows a good agreement. Then the influences of the intake system, the period of valve overlap and the characteristics of the turbine are numerically investigated by the simulation.

• 오토저널
• /
• 제13권6호
• /
• pp.72-81
• /
• 1991

In this study, the analytic investigation of the unsteady flow in the intake and exhaust pipes has been carried out using the method of characteristics in one direction to predict volumetric efficiency. Based on the calculated volumetric efficiency, three zone predictive analysis using Wiebe function was applied to predict the engine performance and the results were compared with experiment. Mixture in the cylinder is subdivided into three zones during combustion process in this analysis; adiabatic core zone, thermal boundary layer zone and unburned zone. In each zone, pressure, temperature and gas composition have been calculated. In conclusion, it is possible to take account of the intake and exhaust pipe tuning effect in predicting the engine performance, by the analytic solution of the unsteady flow in the pipes, and comparison of prediction with experimental results shows a good agreement on the pressure variation in the intake and exhaust pipes which has a direct influence on the volumetric efficiency and performance of the engine.