• 대한물리의학회지
• /
• 제6권2호
• /
• pp.199-205
• /
• 2011

Purpose: The purpose of this study was to investigate the effect of 0cm, 2.5cm, 5cm height increase elevator shoes insole on gait and foot pressure Methods: Fifteen young adult were recruited this study. Gait and foot was measured by Gait AnalyzerTM(Tech Storm Inc. korea). Statistical analysis was used one-way ANOVA to know difference between 0cm, 2.5cm insole and 5cm insole Results: There was no significantly difference on foot length, foot width, foot angle, step time during gait. But step length and step width was significantly difference during gait. There was no significantly difference on gait ratio during stance phase. There was significantly difference on forefoot pressure and rearfoot pressure ratio. Conclusion: These results indicate that height increase elevator shoes insole may be caused step length, step width decreaseed during gait. It caused forefoot pressure increased and rearfoot pressure decreased on foot.

• 한국가시화정보학회지
• /
• 제11권2호
• /
• pp.46-54
• /
• 2013

Study of the wave structure and shear layer in the vicinity of a wall mounted cavity is done by time averaged colour schlieren and time resolved instantaneous shadowgraph technique in an M=1.7 flowfield. Effect of change of cavity width on flow structure is investigated by using constant length to depth (L/D) ratio cavity models with varying length to width (L/W) ratio of 0.83 to 4. The time averaged shock wave structure was observed to change with change in cavity width. Dependence of the shock angle at the leading edge on the shear layer width is also evident from the images obtained. Unsteadiness in the flow field in terms of shear layer dynamics and quasi steady nature of shock waves was evident from the images obtained during instantaneous shadowgraph experiments. Apart from the leading and trailing edge shocks, several other waves and flow features were observed. These flow features and the associated physical phenomena are discussed in details and presented in the paper.

• 한국인터넷방송통신학회논문지
• /
• 제20권6호
• /
• pp.21-26
• /
• 2020

본 논문에서는 자수된 SF-MPAA 구현을 위해 방사체를 자수로 구현할 경우 방사체 구조에 따른 SF-MPAA의 특성을 조사 하였다. 자수된 방사체의 길이방향의 그리드 수와 폭 방향의 그리드 수를 줄여서 피치를 늘렸을 때 안테나 이득과 공진주파수는 추세적으로 감소하였다. 그러나 안테나 특성은 폭 방향의 피치에는 크게 영향을 받으나 길이 방향의 피치에는 상대적으로 영향을 적게 받았다. 따라서 도체비율을 줄이기 위해 길이 방향의 그리드 수를 줄이는 것이 유리함을 알 수 있었다. SLL은 피치보다는 길이와 폭 방향 피치의 조합에 영향을 받았다. 자수된 방사체의 도체비율은 자수실 굵기에 대한 피치의 비율로 결정이 되었다. 이 비율이 5이하에서는 도체비율이 급격히 감소했고 5이상에서는 포화되어 서서히 감소했다.

• 한국잠사곤충학회지
• /
• 제39권2호
• /
• pp.174-179
• /
• 1997

The larval head capsule width, larval weight and length of mulberry longicorn beetle, Apriona germari Hope were measured when the larvae were exuviated in artificial diet rearing. The larval head capsule width from the 1st to the 12th instar was ranged from 0.12 to 0.69 cm, and growth ratio of each instar was significantly high between the 1st and the 2nd instars. The fitness to Dyar's law for the larval head capsule width was 87.6%. When the logarithum of the larval head capsule width is plotted against the number of instars, the calculated regression line was LogY=0.12086+0.06998X and Dyar's constant was 1.18. The larval weight was increased with larval developmental stages, and the coefficient of variation of larval weight was apparently high. But the calculated regression line was LogY=-0.91592+0.25959X and Dyar's constant was 1.25. The growth ration of the larval length was clearly high between the 2nd and the 3rd instars, and that of larvae from the 4th instar was decreased. The calculated regression line was LogY=-0.16932+0.09841X and Dyar's constant was 1.25. In conclusion, our results suggested that the larvae growth of mulberry longicorn beetle appeared to be highly related in the larval head capsule width, larval weight and length.

• 한국CDE학회논문집
• /
• 제16권2호
• /
• pp.83-91
• /
• 2011

There are many researches to make low-energy building. Lots of them focus on facility systems and insulation performance of building materials. However, not only systematic solutions but also approaches in early design stages are important to reduce energy consumption. Using BIM(Building Information Modelling) is considered as an effective and efficient way to simulate building energy and decide alternatives than traditional energy simulation because BIM based energy simulation makes to reduce much time for energy modeling. This study focuses on development of optimized geometry for super tall office buildings in Seoul, Korea. Specifically, length to width ratio and building orientation are main topics of this study because these two topics are the most basic and preceding factors deciding mass design. In this study, Revit MEP 2011 and Ecotect Analysis 2011 are used to make case models and calculate energy load in early design stages. Energy properties of material abide by Korean Standards for Energy Conservation in Building, Korean Guideline for Energy Conservation in Public Office and ASHRAE Standard in USA. This study presents best length to width ratio of plan and optimized orientation by evaluating the case models. Furthermore, this study suggests what should be considered for each case to decrease energy load.

• 한국작물학회지
• /
• 제44권1호
• /
• pp.86-94
• /
• 1999

A set of rice recombinant inbred lines was developed from a cross between a Tongil type variety, Nonganbyeo, and an indica variety, BG276, by the single seed descent method. The number of the lines in the population was 272. All the agronomic characters studied except ADV (alkali-digestion value) showed continuous variation among the RILs, implying that their inheritance mode should be quantitative. The patterns of the variation in the RILs were either normal or skewed distribution. ADVs of RILs were segregated into two groups with 1:1 ratio, indicating that ADVs in this KIL population might be controlled by one major gene. Transgressive variations were also observed in all characters. Heritability values of the characters varied from 0.488 in brown/rough rice ratio to 0.895 in alkali-digestion value. In the analysis of genotypic and phenotypic correlations, the character of yield was positively correlated with 8 different agronomic characters. The number of panicles per hill was negatively correlated with culm length, panicle length, and number of spikelets per panicle. Grain length was positively correlated with grain width, grain thickness, grain length/width ratio, white belly, ADV, and amylose. However, grain length/width ratio was negatively correlated with grain width. White core was also negatively correlated with white belly and ADV.

• Steel and Composite Structures
• /
• 제8권5호
• /
• pp.389-402
• /
• 2008

In December 2005, one(A) of the two pre-engineered warehouse buildings in the port of K City of Korea was completely destroyed and the other(B) was seriously damaged to be demolished. Over-loaded snow and unexpected blast of wind were the causes of the accident and destructive behavior was brittle fracture caused by web local buckling and lateral torsional buckling at the flange below rafter. However, the architectural design technology of today based on material non-linear method does not consider the tolerances to solve the problem of such brittle fracture. So, geometric non-linear evaluation which includes initial deformation, width-thickness ratio, web stiffener and unbraced length is required. This study evaluates the structural safety of 4 models in terms of width-thickness ratio and unbraced length using ANSYS 9.0 with parameters such as width-thickness ratio of web, existence/non-existence of stiffener and unbraced length. The purpose of this study is to analyze destructive mechanism of the above-mentioned two warehouse buildings and to provide ways to promote the safety of pre-engineered buildings.

• Imaging Science in Dentistry
• /
• 제51권4호
• /
• pp.421-427
• /
• 2021

Purpose: The pulp length to width (PL/W) ratio of the maxillary lateral incisor can be used as an age determination method. This study aimed to investigate the correlation between the PL/W ratio of the maxillary lateral incisor on panoramic radiographs and human chronological age in Indonesian subjects. Materials and Methods: This study analyzed with 134 maxillary lateral incisors on 113 panoramic radiographs from patients who visited the Oral and Maxillofacial Radiology Unit of Dental Hospital Universitas Padjadjaran, Bandung, Jawa Barat, Indonesia, from 2013 to 2018 (age range: between 11 to 60 years). The pulp length was measured from the pulp chamber roof to the apical foramen, and the pulp width was measured on the cervical area of the cementoenamel junction in millimeters using Fiji ImageJ open-source software. Simple linear regression (in SPSS) was used to analyze the results. The reliability of the observers was evaluated. Results: The PL/W ratio of the maxillary lateral incisor was significantly correlated with chronological age (P<0.01). No statistically significant difference was found in the PL/W ratio between the left and right maxillary lateral incisors(P=0.333). There was a very strong correlation (r=0.939) between the PL/W ratio of the maxillary lateral incisor and human chronological age, with the following formula: age= -3.057+1.875×PL/W ratio (R²=0.882, standard error of estimate: 4.659). Conclusion: The PL/W ratio of the maxillary lateral incisor on panoramic radiograph can be used for age determination in Indonesian subjects.

• 대한가정학회지
• /
• 제34권4호
• /
• pp.249-263
• /
• 1996

According to the design method for constructing the G gori(the traditional Korean jacket)collar, there are differences in form after its completion. In the construction design of the midsection of the gusset as in that of the basic G gori, not only was the positioning of the two sides of the collar not smooth, but also, when the collar strip was attached, there would be an imbalance on one side or the other so that it was difficult to achieve symetry. Therefore in this project, by applying the pattern design of the gusset midsection to that of the collar midsection, not only did attaching the collar and the collar strip create a visual effect by equalizing the lengths of the tow sides, but the construction was also easy. This method of construction introduces the three-dimensional aspect of the human form in its conic, spherical and cylindrical aspects, so that, through schematizing the scientific character of Korea's clothing, its appropriateness is verified. As a matter of fact, since th-ere in no standardization of pattern whether for educational use or for mass-produced clothing, so that even the patterns used in computer-assisted design are executed according to the designer's personal skill, the reality is that after completion of construction the quality has not been uniform. For this schematization, inverse calculation of measurements pertaining to the calculation formula and of teaching materials has been referenced. In particular, the partial requlation of the calculation formula pertaining to the basic pattern construction, the method of making the collar midsection, and the construction method of the extreme and mean ratio adjustment can be adjusted for all measurements, thereby providing the establishment of a design criterion and the possibility of the standardization of construction methods. The production method for the pattern design is as follows: 1) The conic angle for the G gori's girth, length and neck width is fixed at 70 degrees. 2) The radius of the cone is B/2. 3) The calculation formula is B/4 + 1.5cm 4) The armhole formula is B/4, the same as in the basic method. 5) The width formula is B/10. 6) The ratio of the collar junction(width of collar + width of collar strip)to the gusset length is 5:8. 7) The length of the side seam is a length intersecting the armhole line and the conic radius (B/2), that is an arc that exceeds the length of the G gori's midsection; the component ratio of this length to the collar junction is accordingly 13:5. 8) The curve frame length of the back midsection is an arc exceeding B/4(the armhole line). 9) The ratio of the sleeve opening calculation formula to the armhole length is 8:5, forming an arc with the midsection length.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1997년도 춘계학술대회논문집
• /
• pp.297-303
• /
• 1997

This study was initiated to investigate suitability of men's dress shoe sizes made for young men. Experiments were performed on 172 men for 19 to 29 years of age. Nine dimensions were measured from the subject's right foot and 11 dimensions were measrued from the outline of the foot. The data were analyzed for six different groups. The subjects were grouped by their dress shoe size or the ratio of the foot width to foot length. The result of the experiments lead to the following conclusions: 1. Foot length, metatarsal width and heel width were significantly different among the small, medium and large dress shoe size groups. 2. No significant differences in front foot angle and the inside metatarsal width were found among the above three groups. 3. The difference between wearing shoe size and the foot length was larger for the subjects with wide foot shape.