• 한국환경복원기술학회지
• /
• 제6권2호
• /
• pp.21-26
• /
• 2003

2000년 9월부터 2002년 6월까지 약 50여 회에 걸쳐 전국적으로 191개체를 수집하였고, 관리 도중 고사한 38개체를 제외한 153개체의 왕포아풀의 형태적 특성의 결과는 다음과 같다. 1) 우리나라에 자생하고 있는 왕포아풀의 초장은 최저 4.5cm의 왜성형으로부터 최고 40.0cm의 고성형 까지 다양한 범위를 나타내고 있으며, 그 중 초장의 범위가 10~20cm사이에 있는 왕포아풀이 가장 많이 조사되었고 초장이 30cm를 넘는 고성형은 그리 많지 않았다. 2) 왕포아풀의 엽장은 최저 3.0cm에서 최고 30.2cm의 범위였으며, 평균 13.1cm였다. 초장과 마찬가지로 엽장의 길이도 20.0cm 이하인 것이 대다수였다. 3) 왕포아풀의 엽폭은 최저 1.0mm 세엽형으로 부터 5.0mm 광엽형까지 다양한 형태로 나타났으며, 2.0~3.5mm의 범위에 속하는 개체가 135개체로 가장 많았다. 4) 시각적 품질과 형태적 특성간의 상관분석에서는 초장, 엽장, 엽폭 등 모든 형태적 특성의 항목과 양의 상관관계가 있는 것으로 분석 되었지만, 상관계수는 낮게 나타났다. 5) 형태적 특성간의 상관분석에서는 초장과 엽장의 상관계수가 0.74로 나타나 매우 높은 상관관계가 보였고 95%의 수준에서 유의성이 나타났다.

• 대한치과교정학회지
• /
• 제29권3호
• /
• pp.317-325
• /
• 1999

골격성 III급 부정교합 환자의 정확한 진단과 분석에 있어서 삼차원적인 골격부조화의 양상이나 안면부조화의 원인을 파악하는 것은 중요하다. 본 연구에서는 정모 두부규격방사선 사진 상에서 나타나는 골격성 III급 부정교합자의 계측학적 특성을 파악하기 위하여, 양호한 안모와 교합을 가지는 성인 남녀 정상교합자 60명과 전후방적 부조화가 심한 III급 부정교합을 가지는 성인 남녀 60명을 대상으로 측모와 정모 두부규격방사선 사진의 투사도를 작성하여 안면폭경, 고경, 각각의 비율, 측모계측치에 대응되는 정모계측치의 비율을 구하였고, 각각의 계측치와 비율을 비교, 분석하여 다음과 같은 결론을 얻었다. 1. 골격성 III급 부정교합자에서 골격의 전후방적 부조화는 정상군보다 상악골길이(Cd-A)가 짧은 것보다는 하악골길이(Cd-Gn)가 긴 것에 기인하였다. 2. 골격성 III급 부정교합자는 정상교합자보다 긴 안모를 가지는데, 이는 상안면고경(Cg-ANS)보다는 하안면 고경(ANS-Me), 특히 하악골 고경(Cd-Me)의 증가로 인한 것이었다. 3. 골격성 III급 부정교합자의 폭경은 단지 여자의 상$\cdot$하악 대구치간 폭경(U6-U6, L6-L6)과, 하악폭경(Ag-Ag)만 정상교합자보다 컸을 뿐, 이외 어떤 폭경항목도 정상과 차이가 없었다. 4.골격성 III급 부정교합자의 하악골 길이의 증가는 안모의 고경 특히 하안면 고경의 증가로 나타나지만, 하악골 폭경에서는 영향이 나타나지 않았다.

• 한국의류산업학회지
• /
• 제6권5호
• /
• pp.655-659
• /
• 2004

The purpose of this study is to investigate the somatotype variation & satisfaction with the fit of ready-to-wear for American women. For this study, questionnaires were administered to 192 American women in Louisiana State areas. Employing a sample of 127 data were analyzed by using F-test. The results were as follows: In the satisfaction with the somatotype variation of American women, height items were increased and width items were decreased with aging. At neck, bust, waist, hip and sleeve circumferences, in the satisfaction with the fit of ready-to-wear, were decreased with aging, Correlation for somatotype variation & satisfaction with the fit of ready-to-wear was significantly positive. With aging, the satisfaction with the somatotype & fit of American women's ready-to-wear for sizing system was generally decreased.

• 한국연초학회지
• /
• 제15권1호
• /
• pp.34-48
• /
• 1993

This experiment were conducted to investigate heterosis and combining ability for several mutant characters by analyzing dialled crosses of flue-cured tobacco. In a dialled cross of 3 flue-cured varieties and the mutant line 83H -5, the heterosis was somewhat higher in Fl than in F2. For growth character, the heterosis was 0.28-6.03% in plant height, leaf number, leaf shape index and yield, and was 43.2% for bacterial wilt disease index. The mutant line 83H-5 showed significantly negative GCA effect for plant height, leaf width and bacterial wilt disease index in Fl and F2, leaf length in F2, and positive GCA effect for total alkaloids, total nitrogen in Fl and days to flower in F2, respectively. Specific combining ability(SCA) in 83H-5 x Hicks was significant in negative effect for leaf length(F2), number of leaves(F2), leaf shape(F1, F2), bacterial wilt(F2) and alkaloids(F1), and in 83H-5 x NC 2326 in positive effect for leaf length(F1, F2) and leaf width(F2), and for 83H-5 x NC 82 in positive effect for plant height(F1, F2) and leaf width(F2), and for 83H-5 x NC 82 in Positive effect for Plant height(F1, F2), leaf length(F2) and yield(F1, F2).

• 대한치과교정학회지
• /
• 제53권2호
• /
• pp.67-76
• /
• 2023

Objective: Morphometric and morphological evaluation of the mandibular condyle in adults and to identify its correlation with skeletal malocclusion patterns. Methods: Cone-beam computed tomography scans of 135 adult patients were used in this study and classified into groups according to four criteria: (1) sex (male and female); (2) sagittal skeletal discrepancy (Class I, Class II, and Class III); (3) vertical skeletal discrepancy (hyperdivergent, normodivergent, and hypodivergent); and age (group 1 ≤ 20 years, 21 ≤ group 2 < 30, and group 3 ≥ 30 years). The morphometrical variables were mandibular condyle height and width, and the morphological variable was the mandibular condyle shape in coronal and sagittal sections. Three-dimensional standard tessellation language files were created using itk-snap (open-source software), and measurements were performed using Meshmixer (open-source software). Results: The mandibular condyle height was significantly greater (p < 0.05) in patients with class III malocclusion than in those with class I or II malocclusion; the mandibular condyle width was not significantly different among different sexes, age groups, and sagittal and vertical malocclusions. There were no statistical associations between various mandibular condyle shapes and the sexes, age groups, and skeletal malocclusions. Conclusions: The condylar height was greatest in patients with class III malocclusion. The condylar height and width were greater among males than in females. The mandibular condyle shapes observed in sagittal and coronal sections did not affect the skeletal malocclusion patterns.

• 소성∙가공
• /
• 제17권3호
• /
• pp.203-209
• /
• 2008

In this paper, experimental investigation has been performed to analyze the forming process of toothed or serrated sheets, which is used as strap engaging surface of the seal to secure together overlapping portions of steel or plastic strapping ligature. Serration formed on the strap engaging surface of the seal prevent from relative slipping between overlapping ligatures after closing the seal. The geometry of tooth on the strap engaging surface is directly related to the quality of securing overlapping ligatures together. Inclined indentation followed by scratching operation has been proposed and applied to the experiments. Punch entry and face angles are selected as process variables to see the influence of these variables on the tooth geometry. Five different punch entry angles have been applied to experiments and three different punch face angles have been selected for each case of punch entry angle. Clay is selected as model material for experiments. Experimental results are summarized in terms of tooth height, tooth width, and aspect ratio such as tooth height to width ratio, respectively.

• 반도체디스플레이기술학회지
• /
• 제16권1호
• /
• pp.65-69
• /
• 2017

This paper presents a Technology-CAD (TCAD) simulation of the characteristics of crystalline Si pillar array solar cells. The junction depth and the surface concentration of the solar cells were optimized to obtain the targeted sheet resistance of the emitter region. The diffusion model was determined by calibrating the emitter doping profile of the microscale silicon pillars. The dimension parameters determining the pillar shape, such as width, height, and spacing were varied within a simulation window from ${\sim}2{\mu}m$ to $5{\mu}m$. The simulation showed that increasing pillar width (or diameter) and spacing resulted in the decrease of current density due to surface area loss, light trapping loss, and high reflectance. Although increasing pillar height might improve the chances of light trapping, the recombination loss due to the increase in the carrier's transfer length canceled out the positive effect to the photo-generation component of the current. The silicon pillars were experimentally formed by photoresist patterning and electroless etching. The laboratory results of a fabricated Si pillar solar cell showed the efficiency and the fill factor to be close to the simulation results.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권3호
• /
• pp.322-329
• /
• 2011

A whole genome association (WGA) study was conducted to identify quantitative trait loci (QTL) for body conformation traits in Hanwoo cattle. The phenotypes of 497 steers were recorded from the Hanwoo Improvement Center of National Agricultural Cooperative Federation, Seosan, Korea, and analyzed using the Illumina Bovine 50 k SNP chip. A set of 35,987 SNPs that were available in the Hanwoo population was selected from the chip. After adjustments for the effects of year-season of birth, region and sire, phenotypes were regressed on each SNP using a linear regression model. Three hundred nineteen SNPs were detected for the ten conformation traits (p<0.003). For the significant SNPs, stepwise regression procedures were applied to determine best sets of markers. A total of 72 SNPs were selected (p<0.001), for which the sets of 5, 9, 10, 9, 8, 11, 4, 6, 3 and 7 SNPs were determined for height at withers, rump height, body length, chest depth, chest width, rump length, hip width, thurl width, pinbone width and heart girth, respectively. About 7-26% of the total phenotypic variation was explained by the set of SNPs for each trait. QTL for the conformation traits were harbored on most bovine chromosomes (BTAs). Four SNPs with pleiotropic effects on height at withers and rump height were detected on BTAs 3, 4, 6 and 16. A SNP with pleiotropic effects on chest width and rump length was also detected on BTA10. Two QTL regions, i.e. between 87 and 97 Mb in BTA3 and between 41 and 44 Mb in BTA7, were found, in which SNPs were detected for the five and three conformation traits, respectively. The detected SNPs need to be validated in other Hanwoo populations for commercial application to the genetic improvement of conformation characteristics in Hanwoo via marker-assisted selection (MAS).

• Earthquakes and Structures
• /
• 제25권2호
• /
• pp.135-148
• /
• 2023

The structure-soil-structure interaction (SSSI) effect in adjacent structures may affect the liquefaction-induced damage of shallow foundation structures. The existing studies only analysed the independent effects on the structural dynamic response but ignored the coupling effect of height difference and distance of adjacent structures (F) on liquefied foundations on the dynamic response. Therefore, this paper adopts finite element and finite difference coupled dynamic analysis method to discuss the effect of the F on the seismic response of shallow foundation structures. The results show that the effect of the short structure on the acceleration response of the tall structure can be neglected as F increases when the height difference reaches 2 times the height of the short structure. The beneficial effect of SSSI on short structures is weakened under strong seismic excitations, and the effect of the increase of F on the settlement ratio gradually decreases, which causes a larger rotation hazard. When the distance is smaller than the foundation width, the short structure will exceed the rotation critical value and cause structural damage. When the distance is larger than the foundation width, the rotation angle is within the safe range (0.02 rad).

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.272-277
• /
• 1998

If we want to compare the form of two objects, the human vision takes into account the parameter's width/length/height at the same time. however, the machine needs to compare width then lengths and finally height. In each comparison the machine considers only one character. The goal of this paper is to imitate the human manner of comparison and recognition by using two or three characters instead of one during the comparison. The ellipse is a first approach of comparison because it provides us a general and a simple relation that can link two parameters that are the half axis of the ellipse. Indeed, we assimilate each character to a half axis of the ellipse and the result is a geometrical figure that varies according to values of the two characters.