• Fashion & Textile Research Journal
• /
• v.7 no.2
• /
• pp.179-186
• /
• 2005

Girls' school uniform evaluative criteria and their uniform modification were investigated. The data were collected by questionnaire from 579 middle and high school girls living in Incheon during the fall of 2003. The uniform evaluative criteria consisted of five dimensions: aesthetics, comfort, economy, management, and status concealment factor. The uniform evaluative criteria were used to cluster the students into five groups: economic, practical, aesthetic, negative, and active. The uniform modifications were investigated in regard to sleeve length, sleeve width, breast width, jacket length, skirt length, hip width, and waist width. The aesthetic and the active groups intended to modify uniforms less in sleeve length and skirt length than the other three groups. There were significant differences in the uniform modifications among demographics: school years, height, weight, spending money, satisfaction/dissatisfaction with spending money, and clothing expenditures.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.2 s.30
• /
• pp.155-165
• /
• 1989

The purpose of this study was to investigate on the sleeve form variation according to arm movements for elderly women. This study was experimented using the Plaster gypsum. The subjects who were elderly women were divided into three groups according to Rorher Index. Arm movements were five type ($0^{\circ},\;45^{\circ},\;90^{\circ},\;135^{\circ},\;180^{\circ}$) to each the vertical motion in front and in side. The statistical analyses used in this study were Mean, Standard Deviation, Spearman's correlation coefficients, paired T-test, Kruskal-wallis one-way ANOVA and Duncan's multiple range test. The results were as follows: 1) Increasing the movements, the width of the sleeve increased and the height of the sleeve cap decreased but girth of the sleeve cap was not consistant. 2) When varied the rates of the three aspects of the sleeve, the height of the sleeve cap showed the largest variation rate. 3) There was a negative correlation between the height and the width of the sleeve. On the other hand, there was a positive correlation between the sleeve width and the sleeve girth. 4) There were the vertical motion differences between in front and in side on the three aspects of sleeve. 5) The sleeve width and the sleeve girth were different according to somatotypes but the height of the sleeve cap was not different. 6) According to the variation rates of the body surfaces in length of standard lines, the form of sleeve was changed more in the front than in the back. Maximum variation rate showed in the areas of $D_1-D_3,\;E_1-E_3$ in the horizontal lines and $A-E_2$ in vertical lines. 7) According to the comparative drawing of the heights of sleeve cap and sleeve girth, the sleeve basic pattern $S_1(A.H/4)$ was more suitable for the direction $0^{\circ}\;and\;45^{\circ}$. And the basic pattern S_6(A.H/5)$ was more suitable for the direction $90^{\circ}$, the pattern $S_7(A.H/6)$ suitable for the direction $135^{\circ}$, and the pattern $S_8(A.H/8)$ was more suitable for the direction $180^{\circ}$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.9
• /
• pp.1351-1359
• /
• 2003

This study presents a numerical procedure to optimize shape of streamwise periodic ribs mounted on both of the principal walls to enhance turbulent heat transfer in a rectangular channel flow. The response surface method is used as an optimization technique. The optimization is based on Navier-Stokes analysis of flow and heat transfer with $k-{\varepsilon}$ turbulence model. The width-to-height ratio of a rib, rib height-to-channel height ratio and rib pitch to rib height ratio are chosen as design variables. The object function is defined as a function of heat transfer coefficient and friction drag coefficient with weighting factor. Optimum shapes of the rib have been obtained for the range of 0.02 to 0.1 of weighting factor.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.35 no.2
• /
• pp.118-128
• /
• 1999

The shape of the net mouth in a midwater trawl gear is examined by measuring towing speed, gear resistance, the width of otter boards, net height, and so on of a full-scale gear in operation. In addition, a mathematical model is developed to predict shapes of the net mouth. In the model, shapes of head, ground, side ropes, which governs the shape of net mouth, are assumed as a catenary. The validity of the model is tested with observations. The results can be summarized as follows: 1. The warp tension and vertical opening of the gear is highly dependent to the towing speed. The depth of the gear and width of otter boards are very sensitive to the variations of the warp length. 2. The model results indicate that the wing tip of the head and side ropes is reduced and the vertical distances of the head and side ropes sagged to the back with increasing towing speed. 3. The results of comparing the measured net height with calculated side rope height were satisfying. 4. The results of analysis showed the vertical axis of the net mouth was decreased and the width of the net mouth was little changed when the towing speed increased.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.11
• /
• pp.39-49
• /
• 2011

In this paper it was focused on the characteristics of displacement and stress due to the construction of diagonal twin tunnel. In this research, the characteristics have been analyzed with the presumption that the tunnel's diameter (D) is 13m and the ground was formed by weathered rock. In analysis, the width of pillar is 2.0D, 2.5D, 3.0D, the height of soil cover is 3D, 4D, 5D, and the installation angle of diagonal twin tunnel has been changed into $15^{\circ}$, $30^{\circ}$, $45^{\circ}$. And the program used in this analysis is FLAC which is widely used in solution problems of ground engineering in order to gain and analyze occurring shotcrete and rockbolt stress and nearby ground displacement according to pillar width, the height of soil cover and installation angle of diagonal twin tunnel. As a result, in the weathered rock grounds, when the width of pillar is more than 2.0D, the height of soil cover is over 5.0D, and the installation angle of diagonal twin tunnel is lower, they lessen effects on the ground and favorable on the stability of tunnel.

• The Journal of Engineering Geology
• /
• v.32 no.3
• /
• pp.339-350
• /
• 2022

There are a variety of types in tafoni formed in Miocene tuff from Golgulsa, Gyeongju. Tuff bearing tafoni was quite weathered, composed of quartz, feldspars, micas, vermiculite, chlorite, smectite, and analcite. In the early stage of the tafoni development, tafoni preferentially formed from cavities where volcanic breccias were removed or from microcavities where microcrystals were chemically altered. Small tafoni grew into large one by merging each other. The orientation of tafoni is inversely arranged to slopes, with slight inclination toward the inner cavity. Height, width, and depth of tafoni are closely interrelated: the correlation coefficients are 0.839 (width-height), 0.900 (width-depth), and 0.856 (height-depth), respectively. Removal of walls between tafoni resulted in lenticular or crescent forms, and small tafoni laterally combined to large tafoni. Large tafoni is weak because of high porosity and low strength compared to normal slope. Therefore, systematic monitoring for slope strength, pore proportion and volume, and growth of cavity needs to secure the slope stability where tafoni in Golgulsa is widespread.

• Proceedings of the Korea Contents Association Conference
• /
• 2019.05a
• /
• pp.275-276
• /
• 2019

The purpose of this study was to assess condylar size in volumetric 3D imaging in patients with class I, class II, class III malocclusions. To evaluate the differences among the three experimental groups, the condylar values of men were analyzed. There was a significant difference in the measured values of height. Among the three experimental groups, the condylar measurements in women showed significant differences in height and width. This study is expected to be used for determining the connection between malocclusion and condyle as a base line data.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.4
• /
• pp.40-46
• /
• 1995

The characteristics of the shielded suspended substrate coplanar waveguide(SSCPW) are analyzed by applying the point matchning method to the quasi-TEM mode approximation. The characteristic impedances and the effective dielectric constants are also calculated by changing the height of air and dielectric layer, and the strip width of SSCPW. Approaching the side strip width of SSCPW to zero, values of characteristic impedances and effective dielectric constants are agreed well with the results obtained by the variational method.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.2
• /
• pp.124-129
• /
• 2018

A forklift is used to lift materials above a height of 2 m. The width of the fork determines the weight of the material it can carry. In this paper, three models of fractured forklifts were analyzed to determine if the fracture was caused by load fatigue due to the width of the fork. The position of the fork was fixed on each model, and a 2.5 ton load was placed at the upper part of the fork. The width distances on each of three models were 500 mm, 750 mm and 1000 mm, and the maximum equivalent stresses were 237.5MPa, 227.62MPa and 230.99MPa, respectively. This analysis demonstrated that as the load increased with use of the wider fork, the fatigue life remained to be nearly equivalent irrespective of fork width among all three models. The results of this study contribute to the durability and safety design of forklifts.

• Fashion & Textile Research Journal
• /
• v.21 no.3
• /
• pp.308-317
• /
• 2019

This study provided data for classifying and characterizing the lower half of the body shape for obese adult men in their 30s and 40s. Data of 492 adult males who were obese with a WHO criteria of >25 BMI were used for analysis. The results of the study are as follows. Six factors extracted from the factorial analysis as independent factors for cluster analysis were classified into three types. Type 1 (65.4%) had the lowest height of the lower half of the body with short circumference and length. Type 2 (20.3%) had the lowest height of the lower half of the body with the largest thickness, width and circumference from the back to the hip, but short in length. Type 3 (14.2%) had the lowest height of the lower half of the body with medium height and waist-height; however, the curve from the waist to the hip was the largest with the largest waist circumference, hip circumference, and width and thickness of the lower half of the body. This study will help to design a slack pattern that utilizes body shape characteristics of men in their 30s and 40s. In a follow-up study, we analyze the slack pattern and educational pattern by the company and study the necessity for a slack pattern for obese males.