• Restorative Dentistry and Endodontics
• /
• v.47 no.2
• /
• pp.24.1-24.15
• /
• 2022

Objectives: Regenerative endodontic treatment is a clinical procedure aimed at biologically regenerating damaged root canal tissue of immature permanent teeth. This study aimed to report the outcomes of regenerative endodontic treatment performed by endodontic postgraduate students. Materials and Methods: Clinical and radiographic data of 27 patients, aged 10-22 years, who underwent regenerative treatment of immature permanent teeth from 2015 to 2019 were followed up, wherein clinical and radiographic examinations were performed for each patient. Postoperative success rate and tooth survival were analyzed, and the postoperative radiographic root area changes were quantified. Results: A total of 23 patients attended the dental appointments, showing that all teeth survived and were asymptomatic. Specifically, 7 periapical pathosis cases were completely healed, 12 were incompletely healed, and 4 cases failed. Moreover, significant differences were found between discolored and non-discolored teeth, and between the presence or absence of periapical radiolucency. Additionally, 3 anterior teeth showed complete closure of the apical foramen, while the apical foramen width was reduced in 17 teeth and failed in 3 teeth. Root length was also found to have been increased in 7 anterior and 4 posterior teeth, and the average length ranged from 4.00-0.63 mm in the anterior teeth, 2.85-1.48 mm of the mesial root, and 2.73-2.16 mm of the molar teeth distal root. Furthermore, calcified tissue deposition was observed in 7 teeth. Conclusions: A favorable outcome of regenerative endodontic treatment of immature permanent teeth with necrotic pulp was achieved with a high survival rate.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.28.1-28.6
• /
• 2016

Backgrounds: Insufficient intermaxillary space is caused by non-restoration following tooth extraction in the past, and this involves eruption of the opposing teeth and changes of the arch structure. Such cases are difficult just by a simple prosthetic approach, and diversified treatment plans should be established. Among these, posterior maxillary segmental osteotomy (PMSO) is an efficient treatment option than extraction of opposing teeth as it surgically repositions multiple erupted teeth and alveolar bone. PMSO can preserve the natural teeth; therefore, it is being regarded as a treatment method which can improve insufficient intermaxillary space significantly. Case presentation: In this case report, the first patient received PMSO in order to place an implant in the mandibular edentulous space after decreased vertical dimension is restored, and the second patient received PMSO along with orthodontic treatment to obtain the intermaxillary space and balance the interarch molar width. Conclusion: PMSO is the treatment of choice when occlusion is compromised in the presence of decreased vertical dimension or arch length discrepancy.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.4
• /
• pp.445-449
• /
• 2008

Unerupted or erupted supernumerary tooth may cause crowding, diastema, cyst formation, resorption, and displacement or rotation of adjacent teeth. However, there are few studies about prognosis about the pathologic condition and expectation of spontaneous eruption. The object of this study is to evaluate factors predicting the spontaneous eruption of supernumerary tooth. 431 patients (346 males and 85 females, aged from 5 to 29 years) who visited our institution from 2002-2006 and were shown to have 471 mesiodentes was reviewed. Supernumerary teeth were classified inverted and not inverted state. In case of not inverted supernumerary tooth, eruption rate ac cording to length of supernumenary tooth, width of the tooth, angle between the tooth and incisor tooth, location (inside the incisor or not) and shape (conical or tubercle) were investigated. The regression model showed that length, width and angle were all important determinants of influencing the eruption of supernumerary tooth (p < 0.001, Pearson R: 0.619). There is no relation between shape and eruption of supernumerary tooth (p > 0.05). Location of mesiodens has an effect on eruption of supernumerary tooth (p < 0.01).

• Korean Journal of Cleft Lip And Palate
• /
• v.2 no.1_2
• /
• pp.5-14
• /
• 1999

The aim of treatment of cleft lip and palate is to correct the cleft and associated problems surgically and thus hide the anomaly so that patients can lead normal lives. This correction involves surgically producing a face that does not attract attention, a vocal apparatus that permits intelligible speech, and a dentition that allows optimal function and esthetics. In neonatal periods, gross distortion of tissues surrounding the cleft requires considerable effort and time due to post operative functional defect and scarring and induces milk feeding problem, malocclusion of deciduous or permanent dentition, congenital missing teeth, skeletal dysplasia. The occurrence of a cleft deformity is a source of considerable shock to the parents of an afflicted baby, and the most appropriate approach is very important things. Thus we tried to analysis of dental arch, shape and size of deformity in cleft patients. The results were obtained as follows. 1. When the cast measurements of UCLP subjects at first visit it was found that the mean length was 9.29mm at the alveolar cleft width, also that was 11.7mm at the anterior width and 14mm at the posterior cleft width. 2. Comparison of UCLP group at first visit and just lip surgery, it was found that the older group showed a insignificant reduction in the width of the cleft in the alveolar, canine, and tuberosity regions. 3. The maxillary casts of the UCLP group at 6 months differ Significantly from those of the at 3 months in both length and width. but there was no statistical difference except anterior ridge length of nonclefted site. 4. Comparison at 6 months and 18 months, there was a greater change in length of the alveolar cleft width, intercanine width, and anterior cleft width. Maxillary arch became wider at both the canine region and intertuberosity region. also posterior anteroposterior length was increased but anterior AP length was decreased from 8.1mm to 7.7mm. There was meaningful increase at intertuberosity length; however, a significant reduction in width t-t'

• The Journal of the Korean dental association
• /
• v.54 no.8
• /
• pp.658-665
• /
• 2016

Treatment of immature permanent teeth with irreversibly damaged pulp has been challenging in dental practice because of the lack of apical constriction, thin dentinal walls, and short roots. This may lead to the extrusion of filling materials, and fracture of the root due to its more fragile feature during shaping of the root canal. Apexification with calcium hydroxide or MTA is one of the treatment options for these cases. Although favorable results of apexification have been reported, these treatment procedures do not guarantee the increase of root length and/or width even after a long term period. Thus, treated teeth are still prone to fractures. Recently, pulp revascularization has been proposed as an alternative treatment for immature teeth with necrotic pulp and periapical pathosis. Pulp revascularization allows the stimulation of the apical development and the root maturation. There have been many treatment protocols using various materials such as antibiotics and calcium hydroxide medicament. In this case report, literature review about pulp revascularization and two related cases are presented.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.9 no.1
• /
• pp.19-23
• /
• 1979

A study was made primarily to investigate vertical and horizontal distortion of the image at the apical region of the dental roots in orthopantomographs. The subjects consisted of two dry skulls with radiopaque materials attached to root surface. Measuring of the width and length of each predetermined point at 23 teeth was performed in dry skulls and radiographic films. The results obtained were as follows; 1. There was overall magnification of image in the vertical dimension. And anterior portion had greater magnification rate than posterior portion, while lower anterior portion had less magnification rate than upper anterior portion. 2. There was reduction of the image in the horizontal dimension of the teeth, because of the position relation between dry skull and image layer of the orthopantomograph. 3. There was a significant difference in distortion rate between the oposite teeth. 4. Cervical portion of the tooth had more decreased rate of horizontal distortion than apical portion.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.3
• /
• pp.101-106
• /
• 2001

Air-cored superconducting synchronous generator(ASSG) is characterized by an air-cored machine with its rotor iron and stator iron teeth removed. For this reason, in the case of the shape optimum design of ASSG, other design variables different from an iron-cored machine should be considered, which will lead to substantial improvement on the performance. The major design variables that are considered by using Three-dimensional Finite element Method(3D FEM) in this paper are : 1) field coil width, 2) axial length of magnetic shield, and 3) armature winding method. End-ring of armature winding is considered in the calculation of EMF. When it comes to field coil width, as field coil width enlarges, its effective field increases but the maximum field on the superconductor decreases. this determines the critical current density. this study presents an effective field coil width, axial length of magnetic shield, and armature winding method, and also the analysis is verified by the experimental results.

• Restorative Dentistry and Endodontics
• /
• v.25 no.3
• /
• pp.313-320
• /
• 2000

The purpose of this study was to evaluate on the interfacial morphology between dentin and restorative materials. In this in vitro study, the cavity wall restorated with 3 different kinds of tooth colored restorative materials [resin-modified Glass Ionomer cement (Fuji II LC), composite resin (Z-100), compomer (Dyract)]. The thirty extracted human molar teeth without caries and/or restorations are used. The experimental teeth were randomly divided into three groups of ten teeth each. In each group, Wedge shaped cavities (width: 3mm, length: 2mm, depth: 1.5mm) were prepared at the cementoenamel junction on buccal and lingual surfaces. The adhesive of composite resin were mixed with rhodamine B. Primer of composite resin, Prime & Bond 2.1 of Dyract and liquid of Fuji II LC were mixed with fluorescein. In group 1, the cavity wall was treatment with dentin conditioner, and then restorated with Fuji II LC. In group 2, the cavity wall was treatment with Prime & Bond 2.1 and then restorated with Dyract. In group 3, the cavity wall was etching with 10% maleic acid, applied with primer and bonding agent and then restorated with Z-100. The interface between dentin and restorative materials was observed by fluoresence imaging with a confocal laser scanning microscope. The results were as follows : 1. In Glass ionomer group, adaptation of resin modified Glass-ionomer restoration against cavity wall is tight, but the crack formed inside of restoration were observed. 2. In Dyract group, the penetration of resin tag is shorter and the width of hybrid layer is narrower than composite resin group. 3. In Z-100 group, primer penetrated deeply through dentinal tubule. Also bonding agent was penetrated along the primer, but the penetration length is shorter than primer part, and in 3-D image, the resin tag is conical shape and lateral branch is observed.

• Journal of Periodontal and Implant Science
• /
• v.36 no.2
• /
• pp.461-471
• /
• 2006

In order to achieve a satisfactory esthetic result of periodontal surgery or implant in maxillary anterior area, periodontists must be aware of normal alveolar bone anatomy. The purpose of this study was to evaluate the relationship of alveolar bone morphology to tooth shape and form. 78(mean age : 25 yrs) periodontally healthy volunteers participated in this study. Two maxillary central incisor and one lateral incisor were selected to study. With minimal local anesthesia, gutta-percha cone inserted to labial gingival sulcus of selected teeth just after bone sounding with periodontal probe. Metal ball (4mm diameter) attached to palatal fossa of central incisor. Then, periapical radiograph was taken according to long cone paralleling technique. After film scan, labial alveolar bone profile reproduced along interproximal bone and apical ends of gutta-percha cones on computer screen. By utilizing computer program, the distance from height of interproximal bone to the labial bone crest in central incisor-central incisor and central incisor-lateral incisor area was measured and converted to real distance by using vertical length of metal ball on film. After measuring crown length & width of central incisor, the 10 individuals ranked lowest GW/L ratio (crown width/length ratio) and the 10 ranked highest were selected as having a long-narrow(group N), or a short-wide(group W) form of the central incisors. Means of the distance from height of interproximal bone to the labial bone crest of group N, W were calculated and compared by means of independent t-test. The results were as follows: 1. Mean distance from the height of the interproximal bone to the labial bone crest was $3.5{\pm}0.7mm$ between two central incisor, and $2.8{\pm}0.6mm$ between central and lateral incisor. 2. Mean GW/L ratio of group N was 0.57, and group W was 0.8. Mean distance from the height of the interproximal bone to the labial bone crest of group N was higher than group W in both measured area(measurements of group N, W were $3.9{\pm0.2mm$ and $3.5{\pm}0.2mm$ between two central incisor, $3.0{\pm}0.2mm$ and $2.8{\pm}0.2mm$ between central and lateral incisor), but there were no statistically significant differences when the groups were compared. Within the limits of the present study, there was a tendency that subjects with long-narrow teeth have more scalloped alveolar bone profile than subjects with short-wide teeth in upper anterior area, but no statistically significant differences were found.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.6
• /
• pp.1105-1109
• /
• 2009

This paper deals with a polynomial thrust equation of a permanent magnet linear synchronous motor that is considered by a skew and overhang effects of permanent magnet. The skew length, the overhang length, the width and height of permanent magnet, the teeth length and air-gap length which effect to the flux density of air-gap are selected as variables of the polynomial thrust equation. Polynomial thrust equation is elicited by the 6 parameters. The results are satisfied that the values by polynomial thrust equation are compared ones by using 3-dimensional finite element analysis and experiment.