• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.5
• /
• pp.655-667
• /
• 2010

In this study, problems with table serving of Korean Jeollanamdo food were investigated, and methods for improvement were suggested. The manner of food serving and arrangement on tables, as well as the serving space in each case, were investigated in representative restaurants serving Jeollanamdo food. The results showed that most of the Jeollanamdo Korean food have a prototype of a flat serving sprea, wherein the main dish and side dishes are not clearly identified, the demarcation between shared space and personal space is insufficiently made for each serving on the table, and the table is full of side dishes, that are narrow, visually disordered and unhygienic, both in terms of the table setting and arrangement inside bowls. To provide sufficient eating space, elevate awareness of hygienic and clean serving, and identifying the main dish in the table setting, a serving method that is a compromise between the flat spread-out and time-series development was suggested, and an arrangement on the table was defined for the main dish and side dishes. The utilization of table space was also increased by reducing the number of dishes on the table at a given moment. In addition, the dish or bowl and arrangement inside the container were changed in order to distinguish the main dish and side dishes. It is suggested that some of tableware be linked with the special products of the locality so as to make a brand for them, and that a personal mat be used to arrange the tableware for each one, since there are many fermented food items (salted fish, kimchi, fermented paste and sauce, etc.) and boiled food items (stew, steamed dish, boiled dish in sauce, etc) that look dark and unfocused. In addition, it is suggested that the width and breadth of the dishes or bowls be set in an orderly manner. Considering the tables currently available at restaurants, personal space on a table and comfortable distance between eaters are suggested to be $400 mm{\times}250 mm$ and 300 mm, respectively.

• Journal of the Optical Society of Korea
• /
• v.18 no.2
• /
• pp.110-117
• /
• 2014

In this study, we objectively determined whether the ReSTOR as a multifocal IOL (intraocular lens) has a multifocal function compared to the IQ as a monofocal IOL in vivo by OQAS (Optical Quality Analysis System). Eighteen patients who had cataract surgery with implantation of ReSTOR (27 eyes) and 15 patients with IQ (21 eyes), were included inthis study. Uncorrected distance visual acuity (UCDVA), corrected distance visual acuity (CDVA), uncorrected near visual acuity (UCNVA)and distance corrected near visual acuity (DCNVA) were measured. After setting the artificial pupil size to 3 mm, we performed 'Optical quality'. We inputted defocus diopters of (objective spherical refraction)(far), (objective spherical refraction-1.25 D)(intermediate),(objective spherical refraction-2.5 D)(near), and (objective spherical refraction-3.5 D)(very near) into 'selected spherical refraction' simulating the optical quality at far, intermediate, and near distance. We changed the pupil size to 5 mm and repeated the same measurements. The UCDVA and CDVA did not show significant differences between the 2 groups. But, the UCNVA and DCNVA of the ReSTOR group were better than those of the IQ group (p=0.000, p=0.000). For 3 mm pupil, at far distance, modulation transfer function (MTF) cut off and point spread function (PSF) width at 50% of ReSTOR were worse than those of IQ (p=0.039, p=0.020). At intermediate distance, MTF cut off, Strehl ratio and PSF width at 50% of ReSTOR were worse than those of IQ (p=0.001, p=0.001, p=0.000). At near distance, MTF cut off of ReSTOR was worse than that of IQ (p=0.033). At very near distance, MTF cut off and Strehl ratio of ReSTOR were worse than those of IQ (p=0.002, p=0.002), but PSF width at 50% of ReSTOR was better than that of IQ. For 5 mm pupil, most parameters at each distance, there was no significant difference between the 2 groups. Only PSF width at 50% of ReSTOR were worse than those of IQ at intermediate distance (p=0.013). It was impossible to show the multifocal function of ReSTOR compared to the IQ byOQAS.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.6
• /
• pp.131-141
• /
• 2019

This paper investigates a relationship between a market position of a venture capitalist(i.e.,VC) and its subsequent performance. Although a VC firm may perform better if it occupies a narrow niche(e.g.,specialist), which allows the firm to attain deep insider knowledge and build an identity as an industry expert, a firm may perform better if it has a broader niche(e.g.,generalist), which gives the firm access to more diverse information and opportunities and to effectively spread out potential risks. Given that accesses to valuable information and chances are critical for success in venture capital industry, we hypothesize that venture capitalists with broad niche width are more likely to grow in the future and analyze 26-year data on US venture capital industry. We found that, in general, a firm can enjoy the advantage of having a broad niche. However, the return to having a broad niche varies depending on its status within the market: a return greater for low- status than high-status VC firms. Our finding suggests that explorative efforts may be more rewarding for low-status VC firms.

• Journal of the Korean Society of Costume
• /
• v.18
• /
• pp.97-110
• /
• 1992

West African's traditional looms, weaving and raw materials, structural patterning, dyeing and basic forms of dress were examines in the present study in order to deepen the appreciation of the cultural heritage of West Africa, and to make a contribution to the policy planning for export market developing The research method employed was the analysis f written materials. The study was limited to the traditional clothing habit which is preserved and practicing by them at the present day and the origin and the process of the historical development of those are not included in the scope of the present study. Followings are the results of the study: (1) They have vertical single-heddle loom horizontal or ground single-heddle loom, and double-heddle loom. The width of the cloth produced on the single-heddle loom varies about 38.5cm to 123cm and double-heddle looms all produced on the single-heddle looms all produced narrow strips of cloth varying in width from about 1.3cm to 75cm, although the average is about 10-20cm. (2) Despite the relative simplicity of the llom technology a remarkable variety of textiles are produced. (3) The most popular decorative technique in West African compound weaves is extra-weft patterning which is produced on both single-heddle and double-heddle loom by men and women weavers. Other forms of secondary patterning on textiles in West Africa are dyeing, applique, patchwork and embroidery. (4) Two basic forms of dress have spread throughout West Africa, the poncho (bpibpi) and the wrapper. Some versions of these basic forms are supplemented by western inspired trousers, shirts and blouses coupled with accessories usually complete their traditional outfits. They have a great variety of basic poncho, like as Khasa, Gandura, Tuareg-poncho, Babariga, Rigas (agba-da), Grand-boubou, Afteck, Tagua, buba, Danshike etc. Although West Africa has long been in contact with the peoples of the Nile region as well as the Maghreb and Sahara, both the boubou styles and the wrapper styles appear to have developed with a minimum of outside influence. African Islam was the principal agent for the diffusion of the boubou styles.

• Journal of Sericultural and Entomological Science
• /
• v.44 no.1
• /
• pp.9-12
• /
• 2002

The agronomic characteristics and fertility of Morus tiliaefolia growing wild in Korean peninsula are as follows. The possibility of seed formation is 46∼80% and that of germination is 19∼28%. The height period of making flower is April 4-May 3, it means that is later than Morus bombycis, faster than Kaeryangppong. Green tip sprouting stage in spring is April 21∼24. This is later than Morus bombycis and faster than Kaeryangppong. The leaf has very big width and the ratio of leaf length to leaf width is 1.05. The thickness of leaf is thicker than Morous bombycis. There are a lot of matter of soluble nitrogen free, crude ash, and are little crude protein, crude fat and crude fiber in chemical contents of maturation leaf. The attitude of low cutting is spread out type and the branch is long type. The internord length is long. It is weak against cold and die-back.

• Asian Journal of Atmospheric Environment
• /
• v.12 no.1
• /
• pp.47-58
• /
• 2018

The aim of this work is to investigate the effect of atmospheric stability on near-field pollutant dispersion from rooftop emissions of a single cubic building using computational fluid dynamics (CFD). This paper used the shear stress transport (here after SST) k-${\omega}$ model for predicting the flow and pollutant dispersion around an isolated cubic building. CFD simulations were performed with two emission rates and six atmospheric stability conditions. The results of the simulations were compared with the data from wind tunnel experiments and the result of simulations obtained by previous studies in neutral atmospheric condition. The results indicate that the reattachment length on the roof ($X_R$) obtained by computations show good agreement with the experimental results. However, the reattachment length of the rooftop of the building ($X_F$) is greatly overestimated compared to the findings of wind tunnel test. The result also shows that the general distribution of dimensionless concentration given by SST k-${\omega}$ at the side and leeward wall surfaces is similar to that of the experiment. In unstable conditions, the length of the rooftop cavity was decreased. In stable conditions, the horizontal velocity in the lower part around the building was increased and the vertical velocity around the building was decreased. Stratification increased the horizontal cavity length and width near surface and unstable stratification decreased the horizontal cavity length and width near surface. Maintained stability increases the lateral spread of the plume on the leeward surface. The concentration levels close to the ground's surface under stable conditions were higher than under unstable and neutral conditions.

• Journal of Radiation Protection and Research
• /
• v.43 no.1
• /
• pp.10-19
• /
• 2018

Background: Monte Carlo (MC) simulation is the most accurate for calculating radiation dose distribution and determining patient dose. In MC simulations of the therapeutic accelerator, the characteristics of the initial electron must be precisely determined in order to achieve accurate simulations. However, It has been computation-, labor-, and time-intensive to predict the beam characteristics through predominantly empirical approach. The aim of this study was to analyze the relationships between electron beam parameters and dose distribution, with the goal of simplifying the MC commissioning process. Materials and Methods: The Varian Clinac 2300 IX machine was modeled with the Geant4 MC-toolkit. The percent depth dose (PDD) and lateral beam profiles were assessed according to initial electron beam parameters of mean energy, radial intensity distribution, and energy distribution. Results and Discussion: The PDD values increased on average by 4.36% when the mean energy increased from 5.6 MeV to 6.4 MeV. The PDD was also increased by 2.77% when the energy spread increased from 0 MeV to 1.019 MeV. In the lateral dose profile, increasing the beam radial width from 0 mm to 4 mm at the full width at half maximum resulted in a dose decrease of 8.42% on the average. The profile also decreased by 4.81% when the mean energy was increased from 5.6 MeV to 6.4 MeV. Of all tested parameters, electron mean energy had the greatest influence on dose distribution. The PDD and profile were calculated using parameters optimized and compared with the golden beam data. The maximum dose difference was assessed as less than 2%. Conclusion: The relationship between the initial electron and treatment beam quality investigated in this study can be used in Monte Carlo commissioning of medical linear accelerator model.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.6
• /
• pp.64-73
• /
• 1997

RPWM(Random Pulse Width Modulation) techniques have been attracting an interest as an excellent reduction method of acoustic noise on the inverter drive system. Using randomly changed switching fre-quency of the inverter, the power spectrum of the electromagnetic acoustic noise can be spread out into the wide-band area. The wide band noise is much more comfortable and less annoying than the narrow-band one. This paper describes an implementationof the triangular carrier frequency modultde RPWM inverter drive system The poweer soedtrum of the noise emittde from the induction motro was measured in the anechoic chamber. The analysis of the sources for the acoustic noise and the effects of the noise reduction are confirmed by the ceasured dpectra of the noise. Real-time RPWM along with the speed control was achieved by high speed DSP(Digital Signal Processor ) TmS320C31, By changing the center frequency and the bandwidth of the carrier, theis real-time RPWM scheme can be used as an efficient switching frequency band acoustic noise reduction method for the inverter system with variant load conditions.

• Journal of Korea Trade
• /
• v.26 no.6
• /
• pp.83-95
• /
• 2022

Purpose - With the recent spread of COVID-19, U.S. consumers' consumption pattern is changing towards purchasing large-capacity products, as they stay at home longer. Thus, the current research investigates the effects of box shape and component diversity for large-sized products on product evaluation in logistic business. Moreover, this research examines that information-processing fluency mediates the moderating effects of box shape and product components on target evaluations to confirm psychological mechanism for generating this effect. Design/methodology - In order to examine the hypotheses, the current research conducts two online experiments. The 184 participants (Study 1), and 205 participants (Study 2) of U.S. nationality were recruited through Amazon Mechanical Turk. This research analyzes the data by using SPSS 25 and PROCESS macro 4.0. Findings - Study 1 demonstrates that when the height of a box is greater than its width, products with single components promote positive target evaluations, while when the width of box is greater than its height, products with a variety of components lead to positive target evaluations. Study 2 shows that the same results are replicated in other product categories and with different box shape ratios. Moreover, Study 2 also finds that the ease of information processing mediates the interaction effects of box shape and component diversity on U.S. consumers' target evaluations. Originality/value - The current research has originality in that it investigates the effect of box shape and product composition diversity on U.S. consumer product evaluation from the perspective of information-processing theory Moreover, this research has practical implications for global traders who prepare for entering the U.S. market.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.1
• /
• pp.45-54
• /
• 2006

The study was to review methods by which a ship can unfold and tow an oil boom by attaching the opening apparatus to an oil boom through experiments. The shape and dimension of the opening apparatus were designed with the measurement value of the towing tension load of the oil boom and the dimension of winch drum of the oil boom installed in the ship considered. For the field experiment to identify the performance of the opening apparatus, opening apparatuses were prepared to have the dimension of $3.0m^2$ and $6.0m^2$ which is 91% and 75% of the calculation value for type B and C respectively. As a result, T(kg), the value of tension in type B oil boom according to the towing speed(v) change when two ships are towed together were proved to be $T=920v^{1.1}\;and\;T=500v^{0.9}$ in case the distance is 100 m and 50 m. Based on the result, the dimension of the opening apparatus for type B and C oil boom was calculated as $3.3m^2$ and $8.0m^2$ respectively. When unfolding and towing by attaching the opening apparatus and 200 m of towing line at both ends of type B and type C oil boom, the maximum width of the opening apparatus was shown as 114 m and 95 m in average(width of opening/total length of oil boom: 33% and 57%) in the towing speed of 1.5 kt. It was evaluated that the opening apparatus could concentrate the spilled oil in a good performance. However as far as the increase rate of oil boom opening width according to the length of the towing line is debatable, the increase rate is remarkably reduced when it is lengthened from 100 m to 150 m and to 200 m although it showed extreme increase of 31% and 40% when the length of the towing line was changed from 50 m to 100 m. Therefore, it is inferred that the towing line should be maintained more or less 100 m to get good spread efficiency of the opening apparatus. Additionally, if the towing speed is faster than 1.5 kt, the opening width was narrowed because of the reduced spread efficiency and the shape of the oil boom can be unstable because of the partial sinking of the oil boom, run over waves, or flap of skirt. Thus the reasonable towing speed can be within 1.5 kt for the operation of the opening apparatus.