• 비파괴검사학회지
• /
• 제28권2호
• /
• pp.191-198
• /
• 2008

유체가속부식에 의한 탄소강 배관의 감육은 원자력 발전소 저탄소강 배관의 주요 경년열화 현상으로서, 예상치 못한 배관의 파단을 야기해 발전소의 성능 및 안전을 저해할 수 있다. 최근, 등전위 교번식 직류 전위차법(ES-DCPD, equipotential switching direct current potential drop)을 이용한 배관 감육의 정밀 감시기법이 본 연구자들에 의하여 개발되었다. ES-DCPD 방법은 넓은 배관 영역을 빠르게 검사할 수 있는 방법으로, 넓은 영역의 직관부 감육을 빠르게 검사하는 광역감시법(WiRN, wide range monitoring)과 엘보우 등 곡관부의 감육이 활발한 컴포넌트의 국부적 감육을 비교적 넓은 범위에서 빠르게 스캔하는 협역감시법(NaRM, narrow range monitoring)으로 사용이 가능하다. 광역감시와 협역감시 기법은 초음파검사의 위치 선정파 초음파검사의 검사 누락부에 대한 신뢰성을 개선할 수 있을 것이다. 본 논문에서는 ES-DCPD를 바탕으로 한 새로운 감육 진단 기술을 실험실 환경에서 장기 검증 시험을 수행하여 신호 정밀도를 분석하였고, 결과의 현장 적용성을 논의하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1649-1651
• /
• 2002

Ultra-wide bandwidth (UWB) detection method has been widely used as a front end detection scheme for the ultra-high frequency (UHF) partial discharge (PD) monitoring systems. A broad-band video detector module was developed and characterized for the UHF UWB PD detection systems. The useable bandwidth of the module is more than 2 GHz and it is optimized for 50-ohm systems. The detection sensitivity and dynamic range of the module were characterized by using a known ns-width RF pulses of GHz range. The dynamic range is more than 6-decades and the module can detect pulsed RF signals down to 1 nW. The detector module can eliminate expensive equipment such as high speed oscilloscopes and radio frequency (RF) spectrum analyzers. Therefore, it enables one to use slow speed data acquisition systems for the PD monitoring at the UHF range. The detector module was used to detect real PDs of about <3 pC. The module converts the UWB PD signals into a low-bandwidth video signal with a high signal-to-noise ratio.

• 정보과학회 논문지
• /
• 제44권7호
• /
• pp.733-741
• /
• 2017

LPWAN(Low Power Wide Area Network) 기술은 사물인터넷을 위한 M2M(Machine to Machine) 네트워킹 기술이다. 이 기술의 목적은 저전력, 장거리, 저속 통신을 지원하는 것이며 대표적으로 LoRaWAN(Long Range Wide Area Network)가 있다. LoRaWAN를 이용하여 사물들 간의 정보를 교환하기 위해서는 다양한 환경에 대하여 링크의 성능을 알아야 하는데 실증적인 환경을 기반으로 한 성능 분석 연구는 활발하게 진행되고 있지 않다. 따라서 본 논문은 실내, 실외 환경에서 링크 품질에 영향을 끼칠 수 있는 다양한 변수에 대하여 LoRaWAN의 물리적 통신 기술인 LoRa(Long Range) 링크의 성능을 실증적으로 평가한다. 이를 위해 물리적인 성능 모니터링 시스템을 설계하고 구현하였으며, 이후 통신 실험 환경을 실내, 실외 기반으로 구성하였으며 설정 파라미터 및 거리에 따른 SNR(Signal to Noise Ratio), RSSI(Received Signal Strength Indication), PDR(Packet Delivery Ratio)의 성능을 평가하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.1047-1052
• /
• 1989

A novel multi-purpose monitoring platform-LTA vehicle is presented with much improved kinetic performances together with its structural analysis and its scale model test data. This provides a useful mean of monitoring, exploring and remote sensing platform that flies over the wide range of atmosphere and can be used as a safe economic device.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.46-46
• /
• 2000

A quadruped monitoring robot is introduced. The robot has several features that poses arbitrary position thanks to a 4-wheel hive mechanism, transmits an image and command data via RF wireless communication, and moreover, the imaged date are transferred through a network communication. The robot plays a role in monitoring what is happening around the robot and covers wide range due to a moving camera operated by the 4-wheel mechanism. The robot system can be applied k versatile models based the distinguished techniques introduced in this paper

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.319-326
• /
• 2002

During the construction period of submarine shield tunnel, which is built firstly in very soft marine clay layer 40m deep in Korea, wide range problems were encountered such as safe launching against high earth pressure at shield entrance, technique of shield face pressure control when passing through complex multi-layered soils This paper introduces successful construction practice through development of state-of-the-art construction method and field monitoring.

• Smart Structures and Systems
• /
• 제11권5호
• /
• pp.511-531
• /
• 2013

Recent advances in low-cost remote monitoring systems have made it possible and practical to perform structural health monitoring (SHM) on a large scale. However, it is difficult for a single remote monitoring system to cover a wide range of SHM applications due to the amount of specialization required. For the remote monitoring system to be flexible, sustainable, and robust, this article introduces a new cost-effective, advanced remote monitoring and inspection system named DuraMote that can serve as a next generation supervisory control and data acquisition (SCADA) system for civil infrastructure systems. To evaluate the performance of DuraMote, we conduct experiments at two representative counterpart sites: a bridge and water pipelines. The objectives of this article are to improve upon the existing SCADA by integrating the remote monitoring system (i.e., DuraMote), to describe a prototype SCADA for civil engineering structures, and to validate its effectiveness with long-term field deployment results.

• International Journal of Aeronautical and Space Sciences
• /
• 제1권1호
• /
• pp.48-61
• /
• 2000

Korea Aerospace Research Institute (KARI) have gained experience with Helicopter Vibration Health Monitoring (VHM) System technology with the help of UK GKN-WHL. GKN-WHL have had many years of experience with the research and development of vibration analysis techniques to improve the health monitoring of helicopter transmissions. This activity was targeted at transmission rig testing at first, but the techniques have been progressively developed where they are now used as a part of integrated Health and Usage Monitoring (HUM) systems on many types of in-service and new helicopters. The technique development process has been considerably aided by an ever expanding database of transmission monitoring experience from both the rig testing and aircraft operations. This experience covers a wide range of failure types from naturally occurring faults to crack propagation studies and covering a wide range of transmission configurations. Primarily based on accelerometer signals GKN-WHL's vibration analysis methods have also been applied to a variety of other sensor types. The transition from an experimental environment to operational VHM systems has been a lengthy process, there being a need to demonstrate technique reliability as well as effectiveness to both regulatory (Airworthiness Authority) and commercial organizations. Another important feature of this process has been the development of close relationships with a number of VHM system hardware and software suppliers. Such an experienced GKN-WHL provides various raw vibration data which was acquired from transmission ground test rig and allow KARI to develop it's own analysis program. KARI made a program and then analyzed the data to coma pre with the results of GKN-WHL. The KARI's results both time domain signals and statistical values show comparable to GKN's.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.97-98
• /
• 2007

A wide range of data is available as too causes of large power transformers. Although the percentage of transformer component failure rates vary, all data shows that the top three failure mechanisms are Load Tap Changers (LTC), Bushings and Windings. To date, the most common methods employed to determine the health of a transformer are off line tests and online temperature monitoring, winding hotspot calculations and dissolved gas analysis.

• 수산해양기술연구
• /
• 제42권3호
• /
• pp.179-185
• /
• 2006

In order to efficiently manage the coastal and offshore fishing ground, the applicability of real-time monitering was also investigated through a wide-area network of automatic identification system(AIS). The experiment of efficiently managing coastal and offshore fishing ground with a wide-area network of AIS required, on the headquarter's screen, a synthetic display of vessel information transmitted from three different distant stations. This experiment tested the applicability of real-time monitoring with the shown display. The maximum range of detection of the first station in Busan was 24 nautical miles while those of the second and third stations in Yeosu and Jeju were 26 and 52 nautical miles, respectively.