• Journal of the Ergonomics Society of Korea
• /
• v.28 no.4
• /
• pp.61-69
• /
• 2009

With increasing needs for affective design, it became an essential part in a product development process to look up quantitative ergonomic data that reflects customers' preferences on design factors in various products. This study looked at wide LCD monitors and analyzed customers' affective preferences regarding monitor's bezel frame size and shape. The monitor's bezel frame depth, size and ratio were selected as independent variables among many design parameters. As dependent variables, customer's subjective preferences were measured. A statistical analysis revealed that monitor's bezel frame depth, size and ratio had significant effects on customer's preferences. Also, it was possible to find a different tendency on affective variables and their levels for 19" and 24" wide LCD monitors. In general, experiments revealed that customers reacted more sensitively in 24" wide LCD monitors to all variables. In 19" wide LCD monitors, only the lower frame bezel size had a significant effect, otherwise, lower, upper and side frame bezels appeared to be effective variables in 24" monitors. In order to reflect customer's affective preferences to new design of wide LCD monitors, this study is expected to provide quantitative ergonomic data and guidelines for the design of wide LCD monitor's bezel frame depth and size.

• Journal of Positioning, Navigation, and Timing
• /
• v.13 no.2
• /
• pp.189-197
• /
• 2024

Galileo is a European Global Navigation Satellite System (GNSS) that has offered the Galileo Open Service since 2016. Consequently, the standardization of GNSS augmentation systems, such as Satellite Based Augmentation System (SBAS), Ground Based Augmentation System (GBAS), and Aircraft Based Augmentation System (ABAS) for Galileo signals, is ongoing. In 2023, the European Union Space Programme Agency (EUSPA) released prior probabilities of a satellite fault and a constellation fault for Galileo, which are 3×10^-5 and 2×10^-4 per hour, respectively. In particular, the prior probability of a Galileo constellation fault is significantly higher than that for the GPS constellation fault, which is defined as 1×10^-8 per hour. This raised concerns about its potential impact on GBAS integrity monitoring. According to the Global Positioning System (GPS) Standard Positioning Service Performance Standard (SPS PS), a constellation fault is classified as a wide fault. A wide fault refers to a fault that affects more than two satellites due to a common cause. Such a fault can be caused by a failure in the Earth Orientation Parameter (EOP). The EOP is used when transforming the inertial axis, on which the orbit determination is based, to Earth Centered Earth Fixed (ECEF) axis, accounting for the irregularities in the rotation of the Earth. Therefore, a faulty EOP can introduce errors when computing a satellite position with respect to the ECEF axis. In GNSS, the ephemeris parameters are estimated based on the positions of satellites and are transmitted to navigation satellites. Subsequently, these ephemeris parameters are broadcasted via the navigation message to users. Therefore, a faulty EOP results in erroneous broadcast ephemeris data. In this paper, we assess the conventional ephemeris fault detection monitor currently employed in GBAS for wide faults, as current GBAS considers only single failure cases. In addition to the existing requirements defined in the standards on the Probability of Missed Detection (PMD), we derive a new PMD requirement tailored for a wide fault. The compliance of the current ephemeris monitor to the derived requirement is evaluated through a simulation. Our findings confirm that the conventional monitor meets the requirement even for wide fault scenarios.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.428-431
• /
• 2009

Recently, uses of a large, wide screen monitors are general, so people that efficiently use work area of monitor is encreasing. Use pattern of monitor is being changed just using one window to many windows at a time. In this paper, I will explain develop windows placement system for efficient use monitor. It is different from other general utility about windows placement system because users can easily change windows placement to use preview window. The future, a large, wide screen monitors to keep pace with the demand to take advantage of the window to satisfy the needs of the user to manually adjust the window to the inconvenience that will be resolved.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.756-758
• /
• 2006

Although LCD market has been divided so far into high-end market with S-IPS & SPVA and low-en market with TN mode, TN MNT has been striving towards bigger share in large and high-resolution wide display market as well. LG.Philips LCD has developed 20.1 inch and 22.0 inch WSXGA+ wide monitor mainly focusing on the low cost based on high brightness, fast R/T, high color gamut and wide viewing angle.

• Journal of Biomedical Engineering Research
• /
• v.4 no.1
• /
• pp.21-28
• /
• 1983

The opjective of this research is to derelop the linearijed digital temperature monitor based on EPROM. The advantages associated with this proposod monitor as Compared with the conventional temperature montor is very high accuracy in wide range The accuracy of this monitor was evaluated by the experimental system which was consisted of the water-bath controller. mercury thermometor, and YSI-400 series probes.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.240-242
• /
• 2006

In this paper, Infra system that can monitor and analyze the wide area power system phenomena based on RTDS is established. This system provide users with understandable viewer for monitoring power system as well as management system for RTDS simulation model cases. The tests are studied based on 345kV, 115 buses korean system using RTDS.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.294-298
• /
• 2000

As the LED or LCD technology has been developed, if we use LED or LCD pannel, more wide color range coluld be obtained as CRT monitor. Specially, full color LED display is developed by high brightness blue LED. It can be applicable to display pannel with a long-life, wide visible angle and high brightness. A display pannel shows the images of CRT monitor performed by the main computer. Graphic application in the main computer is therefore more important in the market. Conventional 3D STUDIO, one of graphic softwares, has difficulties in manipulating and understanding the specific terminology so that one may need more time to learn it. We, therefore, developed graphic application which can recycle the conventional 3D images by creating or editing the image easily.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.149-154
• /
• 2002

In a high speed spindle system, it is very important to monitor the state of rotating rotor. Particularly in active control spindle system, the position sensor must provide feedback to the control system on the exact position of the rotor. In order to monitor the state of a high speed spindle exactly, high accuracy and wide frequency bandwidth of sensors are important. This paper observes the factors which has an effect on dynamic performances of inductive position sensor.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.294-296
• /
• 2005

We developed new WV-TN panel which has 170/170 viewing angle and 8ms response time. This viewing characteristics almost catch up with those of VA. To extend the viewing angle we optimized the cell design and LC parameters. This new technology strongly increase the demand of TN monitors especially for the monitor market larger than 19"

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.4
• /
• pp.61-68
• /
• 2007

Two experiments examined the visual memory distortion by presenting 170 subjects with wide-angle views of four scenes on monitor screen. Retention interval of 0, 1 and 48 hours tested in reproduction and recognition experiment. The results of reproduction showed that the subjects tend to magnify the foreground and background of scenes compared to the real input (scene) for all retention intervals. The viewers recognized mure wide-angle views for the same scenes at the retention interval of 1 and 48 hours. These results demonstrated boundary extension is not a robust and unidirectional phenomenon but boundary contraction can be occurred with wide-angle views. The results also suggested that boundary contraction is the product of the activation of a memory schema hypothesis: In memory the representation moves toward a prototypical view and prototypical object size.