• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.12
• /
• pp.1314-1317
• /
• 2014

In this letter, we designed monopole microstrip antenna for WLAN / WiMAX system. The monopole antenna is designed by FR-4 substrate with size is $30mm{\times}40mm$. The proposed antenna is based on a planar monopole design which cover WLAN and WiMAX frequency bands. To obtainthe optimized parameters, we used the simulator, CST's Microwave Studio Program and found the parameters that greatly effect antenna characteristics. Using the obtained parameters, the antenna is designed. Thus the proposed antenna satisfied the -10 dB impedance bandwidth requirement while simultaneously covering the WLAN and WiMAX bands. And characteristics of gain and radiation patterns are obtained for WLAN/WiMAX frequency bands.

• Journal of Internet Computing and Services
• /
• v.16 no.6
• /
• pp.1-9
• /
• 2015

In this paper, we study the coexistence of typical radio access technologies (WiMAX, CDMA, WLAN) in heterogeneous networks. Although the radio accesses employ different frequency band, they can interfere with each other due to out-of- band emission. We compute the minimum adjacent channel interference ratio (ACIR) to satisfy the allowable level of interference, and the resulting minimum frequency separation (guard band) between interfering and victim system. We observe that WiMAX-WLAN coexistence and WiMAX-CDMA coexistence are feasible with at least 20 MHz and 15 MHz guard bands, respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.2 no.2
• /
• pp.63-81
• /
• 2008

WiMAX has been introduced as a competitive alternative for metropolitan broadband wireless access technologies. It is connection oriented and it can provide very high data rates, large service coverage, and flexible quality of services (QoS). Due to the large number of connections and flexible QoS supported by WiMAX, the uplink access in WiMAX networks is very challenging since the medium access control (MAC) protocol must efficiently manage the bandwidth and related channel allocations. In this paper, we propose and investigate a cost-effective WiMAX bandwidth management scheme, named the WiMAX partial sharing scheme (WPSS), in order to provide good QoS while achieving better bandwidth utilization and network throughput. The proposed bandwidth management scheme is compared with a simple but inefficient scheme, named the WiMAX complete sharing scheme (WCPS). A maximum entropy (ME) based analytical model (MEAM) is proposed for the performance evaluation of the two bandwidth management schemes. The reason for using MEAM for the performance evaluation is that MEAM can efficiently model a large-scale system in which the number of stations or connections is generally very high, while the traditional simulation and analytical (e.g., Markov models) approaches cannot perform well due to the high computation complexity. We model the bandwidth management scheme as a queuing network model (QNM) that consists of interacting multiclass queues for different service classes. Closed form expressions for the state and blocking probability distributions are derived for those schemes. Simulation results verify the MEAM numerical results and show that WPSS can significantly improve the network’s performance compared to WCPS.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.2
• /
• pp.67-72
• /
• 2011

8-layer printed circuit board is designed and implemented for triple band(2.3/2.5/3.5GHz) m-WiMAX system. In order to maintain excellent RF performance, low dielectric constant material is used for implementation of the printed circuit board. Also, embedded printed circuit board which embed passive devices is manufactured to reduce total system area. As a result, total system area is cut off by 9%. Triple band m-WiMAX system is produced using embedded printed circuit board. Furthermore, internet connecting test is performed and proved successful running of the system. The developed embedded printed circuit board will provide a effective solution for system area reduction and low loss signal RF communication system.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.4
• /
• pp.59-67
• /
• 2013

Compared to the conventional Hardware-oriented base stations, Software Defined Radio (SDR)-based base station provides various advantages especially in flexibility and expandability. It enables the multimode capability required in 4th-generation (4G) environment which aims at a convergence network of various kinds of communication standards. However, since a single base station processes all data required in various multiple waveforms, the SDR base station faces a problem of data processing speed. In this paper, we propose a new concept of SDR base station system which adopts a parallel processing technology of clustering environment. We implemented a WiMAX system with SDR concept which adopts the Message Passing Interface (MPI) technology which enables the speed-up operations. In order to maximize the efficiency of parallel processing in signal processing, we analyze how the algorithm at each of modules is related to data to be processed. Through the implemented system, we show a drastic improvement in operation time due to parallel processing using the proposed MPI technology. In addition, we demonstrate a feasibility of SDR system for 4G or even beyond-4G as well.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5233-5241
• /
• 2014

This study analyzed the system level performance of the Mobile WiMAX-based TICN, and the effects of the use of BS-OTM in terms of the throughput of individual users as well as the overall system, assuming that other stationary BSs are distributed randomly. When BS-OTM is used, the CINRs decrease due to the additional interference from the BS-OTM from the perspective of SSs that are served by the same BS as when OTM BS is not used. On the other hand, from the perspective of SSs that had low CINRs, the CINRs increase significantly due to the new service from BS-OTM. Considering both effects, the cell throughput can be increased using BS-OTM. The CINR distribution and throughput of the overall system, changing the carrier frequency, position and velocity of the BS-OTM were also evaluated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12A
• /
• pp.998-1005
• /
• 2009

In the uplink of OFDMA (Orthogonal Frequency Division Multiple Access) based M-WiMAX(Mobile-Worldwide Interoperability for Microwave Access) system, linear phase shift is caused by signals transmitted from multiuser with different delay time and thus, MAI (Multiple Access Interference) occurs. MAI degrades the performance of ranging code detection and delay time estimation in the uplink. Therefore, in this paper, we propose ranging algorithm, applying SIC (Successive Interference Cancellation) to the conventional ranging algorithm, to minimize MAI and to improve ranging performance. The proposed ranging algorithm is verified through the Monte Carlo simulation, which shows the improved performance of ranging code detection and delay time estimation compared to the conventional algorithms. Through compared with random access of the 3GPP LTE, we can know limit of ranging performance.

• Journal of Advanced Navigation Technology
• /
• v.18 no.1
• /
• pp.84-89
• /
• 2014

Worldwide Interoperability for Microwave Access (WiMAX) is an efficient technology for 20th century communication system. The technology provides broadband speed without the need for cables and is based on the IEEE 802.16 standard(also called Wireless MAN). Mobile WiMAX is defined as IEEE802.16e which is advanced and efficient technology for mobile telecommunication rather than GSM, CDMA technology. In this work link budget calculation for WiMAX have been done. Cell range have been calculated over digital modulations and they are BPSK, QPSK and QAM. Here different types of models like Cost 231 model have been used for different types of areas like open, rural and urban areas and Erceg-Greenstein model for sub-urban areas. Effect of various parameters like frequency, base station antenna height, transmission power and SNR over cell range have been studied. Analysis have done for both uplink and downlink.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.355-359
• /
• 2008

와이브로(WiBro), 3G 무선인터넷(HSDPA), 3G LTE 등과 같은 와이어리스 브로드밴드(Wireless Broand) 기술이 점차 성숙됨에 따라 이들 망을 활용한 다양한 무선인터넷 서비스를 제공하려는 사업자들이 증가하고 있다. 기존의 WLAN, 2G/3G 회선망에서의 제한된 이동성 및 네트워크 전송 속도를 개선한 와이어리스 브로드밴드 서비스 시장은 국내에서도 2006년부터 WiBro 및 HSDPA가 사용됨에 따라 사업자간의 경쟁도 본격화되고 있다. 이러한 환경 속에서 사업자들은 신속하고 편리한 서비스 개통과 스마트폰, USB모뎀, 노트북, UMPC, PMP등 다양한 단말들의 펌웨어 업그레이드, A/S 처리 방안에 대해 고심을 하고 있으며, 이들 문제점은 막대한 비용과 고객 민원을 야기시키는 요인이기도 하다. 따라서 경제적인 관리비용으로 동적인 서비스/펌웨어 업그레이드 및 A/S에 대한 고객 만족도를 높이기 위한 단말 원격 관리 필요성이 절실히 요구된다. WiBro 단말의 안전하고 효율적으로 관리하기 위해서는 단말과 기지국사이의 무선구간에 대한 보안(security)을 강화시켜 줄 수 있으면서 이동성(mobility)을 고려한 OMA DM프로토콜을 이용하는 것이 적합하다. 또한, WiBro에서 가입자 인증을 채택하고 있는 UICC의 관리를 위해서 3GPP에서 정의하는 SMS/MMS기반의 또는 BIP(Bear Independent Protocol)기반의 OTA기술을 병행하여 사용하여야 한다. 본 논문에서는 Wi-MAX단말 관리를 위한 OTA Provisioning 규격으로 OMA DM과 TR069이 WiMAX 단말을 위하여 어떻게 적용하도록 규정하고 있는지를 살펴본다. 특히, WiBro 가입자 인증뿐만 아니라 폰북, DRM, 금융서비스 등 다양한 부가 서비스를 위하여 사용되는 UICC의 원격관리를 위한 관리 요소들을 정의, 설계하고 이를 바탕으로 구현된 KTUICC OTA Provisioning시스템을 소개한다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.4
• /
• pp.295-301
• /
• 2011

A triple-band transceiver module for 2.3/2.5/3.5 GHz mobile WiMAX, IEEE 802.16e, applications is introduced. The suggested transceiver module consists of RFIC, reconfigurable/multi-resonance MIMO antenna, embedded PCB, mobile WiMAX base band, memory and channel selection front-end module. The RFIC is fabricated in $0.13{\mu}m$ RF CMOS process and has 3.5 dB noise figure(NF) of receiver and 1 dBm maximum power of transmitter with 68-pin QFN package, $8{\times}8\;mm^2$ area. The area reduction of transceiver module is achieved by using embedded PCB which decreases area by 9% of the area of transceiver module with normal PCB. The developed triple-band mobile WiMAX transceiver module is tested by performing radio conformance test(RCT) and measuring carrier to interference plus noise ratio (CINR) and received signal strength indication (RSSI) in each 2.3/2.5/3.5 GHz frequency.