• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.57-69
• /
• 2014

As of 2013, Korean population density is 505 persons per $1km^2$ and is ranked 3rd place in the most densely populated countries exception of city-states. It shows clearly the population is concentrated in the city area. To fulfil this urban concentration population demand, the enlargement and complexation of buildings, subway and other underground spaces connection tendency has been intensified, and it is need to construct the indoor spatial information DB as well as the accurate indoor surveying DB to promote people's safety and social welfare. In this study, Sadang station and Incheon National Airport were aimed for the construction of Wi-Fi AP location DB and RadioMap DB by collecting the indoor AP raw datas by using mobile device and those collected results were ran through the process of verification, supplementation, and analyzation. To evaluate the performance of constructed DB, 10 points in Incheon Airport- 3rd flr in block A, and 9 points in Sadang station-B1 were selected and calculated the estimated points and ran evaluation experiment using survey positioning error, which is distance between real position and the estimated position. The result shows that Incheon international airport's average and standard deviation was separately 17.81m, 17.79m and Sadang station's average and standard deviation was separately 22.64m, 23.74m. In Sadang station's case, the areas near the exit has low performance of surveying position due to fewer visible AP points than other areas. As total datas were examined except those position, it was verified that the user's location was mapping close position in surveying positioning by using constructed DB. It means that constructed DB contains correct Wi-Fi AP locations and radio wave patterns in object region, so it is considered that the indoor spatial information service based on constructed DB would be available.

• Smart Media Journal
• /
• v.4 no.2
• /
• pp.46-54
• /
• 2015

Communication between ECUs (Electronic Control Units) in agricultural machineries tends to use IS011783 widely, that is PGN (Parameter Group Number) based communication protocol lays on CAN protocol by altering its identifier part. Messages in line are transferred and received between ECUs according to ISO11783 standard. This paper discusses about design of wireless monitoring system. We used an ARM Cortex-M3 microcontroller embedded development board and marvel8686 wireless module. The wireless ISOBUS monitoring system, attached to communication line, reads messages, interpret them, and display them on the screen in easily comprehendible form. It can be used to generate messages and monitor the traffic on physical bus systems. The monitoring system connected to ECUs, monitor and simulate real traffic of communication and functionality of the ECUs. In order to support our work, we have implemented the monitoring tool. The development consists of two parts: GUI of the application and firmware level programming. Hence the monitoring system is attached to the communication line and equipped by Wi-Fi module; farmer/dispatcher in a farm monitors all messages in communication line on personal computer and smart device.

• Journal of Communications and Networks
• /
• v.16 no.2
• /
• pp.238-244
• /
• 2014

A key technical challenge in TV white spaces is the efficient spectrum usage without interfering with primary users. This paper considers available spectrum discovery scheme using in-band sensing signal to support super Wi-Fi services effectively. The proposed scheme in this paper adopts non-contiguous orthogonal frequency-division multiplexing (NC-OFDM) to utilize the fragmented channel in TV white space due to microphones while this channel cannot be used in IEEE 802.11af. The proposed solution is a novel available spectrum discovery scheme by exploiting the advantages of a sensing signaling. The proposed method achieves considerable improvement in throughput and delay time. The proposed method can use more subcarriers for transmission by applying NC-OFDM in contrast with the conventional IEEE 802.11af standard. Moreover, the increased number of wireless microphones (WMs) hardly affects the throughput of the proposed method because our proposal only excludes some subcarriers used by WMs. Additionally, the proposed method can cut discovery time down to under 10 ms because it can find available channels in real time by exchanging sensing signal without interference to the WM.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.275-279
• /
• 2014

Due to a modern medical technology developement and the stability of social welfare policy, the current population of old person in Korea reaches to 550 million with the increasing elderly population rate(11.8%). But the living standard of elderly people does not meet to their needs of convenience on the proportion of the percentage of elderly people. Accordingly, this study mainly focuses on the research to find various advanced IT technologies to make elderly people more convient to use. Advanced IT industry makes it possible the convinence of elderly people using NFC, Wi-Fi, cardiac measurement technology.

• Convergence Security Journal
• /
• v.16 no.5
• /
• pp.87-93
• /
• 2016

An Interest and development of an automation of the manufactory technology has been attempted actively in domestic and outside country. In particular, small and medium-sized manufactory are striving for the improvement of productivity through the automation of the plant. And manufactories to comply with the German's Industry 4.0 standard has attempted worldwide recently. But, This is not performed because a substantial investment-cost and development-cost and high efforts. Therefore, we attempted to design and mockup the SEB to enhance the productivity of the factory automation system. SEB, in conjunction with RFID and WiFi networks, expanding the communication range than the automation system of the existing plant, the transfer speed was also improved rapidly. And to be able to solve the existing factory automation system of vulnerability security of the problem, it can be solved by adding a section for user authentication.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.652-659
• /
• 2011

Due to overuse of commercial network systems such as bluetooth and WI-FI, the problems of frequency interruption and line-crossing may arise. For this reason, wireless communication frequency ISM 2.4GHz, a recently adapted concept in Korea which is employeed by RF-CBTC system, is predicted not to have guarantee for outstanding and continuous performance. Therefore in this study, considering these problems, 5GHz capacity wireless Lans with international standard 802.11a/b/g applied were installed in the underground urban transit areas and it was proved that these lans exceeded the performance level of 2.4GHz with international standard 802.11b which is being introduced in the nation. In addition, it was verified through carrying out an application test that the communication condition was stable in a running train with high speed in the tunnel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.1
• /
• pp.17-28
• /
• 2014

The increase of smartphone users have made mobile carriers offload increasingly congested traffic of 3/4G by providing Wi-Fi hot-spots in the public places such as coffee shops and subway stations. In the traditional authentication in WLAN, the users should convince the service providers that they are valid customers before they use WLAN services. Since the authentication protocol is designed for service providers. Even with the mutual authentication based on the IEEE 802.1X, which is supported by IEEE 802.11 standard, it is difficult to be convinced of that the service providers really have installed the WLAN APs, which users are confronted with. An attacker can install rogue APs that masquerade as legitimate APs by copying the SSID, MAC address, etc. in order to obtain users' private information. In this paper, we introduce a method of authenticating legitimate APs for smartphone users. And we show our proposal can be well utilized for the current Wi-Fi hot-spots as a security plug-in and prove it through our experiments.

• Journal of Internet Computing and Services
• /
• v.13 no.1
• /
• pp.57-63
• /
• 2012

Recently, Development of high-speed internet networks can be a real-time video conference system. SD-quality still images using the software codec system exists, and two-way system with mobile systems, but in most video only send and receive video system. In this study, HD web-cam using the two-way live broadcasts simultaneously in the education system and the mobile system has developed an audible system. In the study using the H.264 standard video compression techniques were applied to high-bandwidth compression technology, smart phones, to develop a streaming server for broadcasting were applied. Video sharing, document, web-sharing was made possible in real time. In addition, the private IP for WiFi zone, available anytime, anywhere that can be converted to a public IP technology, IP tunneling technology applied.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.4
• /
• pp.837-846
• /
• 2013

Recently, new technologies based on wireless LAN is being studied because utilization on smart phone using Wi-Fi is increased. 802.11 b/g/a is universalized wireless LAN technologies based on ISM, the standard developed in 11's working group of IEEE 802. standardization about IEEE 802.11ac that overcame limitation on Blue-ray of IEEE 802.11n or uncompressed video transmission and IEEE 802.af's technologies using TVWS is being actively studied. In this paper, ability of transmission considering the security on AP operated by these technologies have measured and done a comparative analysis with existing wireless LAN environment ability of transmission measured when appling security is more stable than existing ability of transmission in an environment with obstacles and shorten of transmission time is confirmed as a result of analysis.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.590-591
• /
• 2017

In the existing smart home, a separate platform was set up for each manufacturer to provide services through terminals. However, due to the development of Internet technology, various Internet devices and services have been launched, and there is a limit to the existing closed platforms for each manufacturer. Therefore, in this paper, we propose an object internet controller that integrates control of Internet devices in a smart home environment and provides various services through IFTTT. The proposed Internet controller is connected to the server via WiFi, and can control the Internet device and service of objects through the button input event. In addition, we expect to be able to provide a service environment that can create various smart home services by registering DIY products through open platform of oneM2M standard method.