• Journal of Internet Computing and Services
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2015

Ultra-wide-angle wireless endoscopes are demonstrated in this paper. The endoscope is composed of an ultra-wide-angle camera module and wireless transmission module. A lens unit with the ultra-wide FOV of 162 degrees is designed and manufactured. The lens, image sensor, and camera processor unit are packaged together in a $3{\times}3{\times}9-cm3$ case. The wireless transmission modules are implemented based on UWB- and WiFi-based platform, respectively. The UWB-based module can transmit HD video to a computer in resolution of $2048{\times}1536$ (QXGA) and the frame rate of 15 fps in MJPEG compression mode. The maximum data transfer rate reaches 41.2 Mbps. The FOV and the resolution of the endoscope is comparable to a medical-grade endoscope. The FOV and resolution is ~3X and 16X higher than that of a commercial high-performance WiFi endoscope, respectively. The WiFi-based module streams out video to a smart device with th maximum date transfer rate of 1.5 Mbps at the resolution of $640{\times}480$ (VGA) and the frame rate of 30 fps in MJPEG compression mode. The implemented components show the feasibility of cheap medical-grade wireless electronic endoscopes, which can be effectively used in u-healthcare, emergency treatment, home-healthcare, remote diagnosis, etc.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.12
• /
• pp.1890-1897
• /
• 2021

People counting is an important technology to provide application services such as smart home, smart building, smart car, etc. Due to the social distancing of COVID-19, the people counting technology attracted public attention. People counting system can be implemented in various ways such as camera, sensor, wireless, etc. according to service requirements. People counting system using WiFi AP uses WiFi CSI data that reflects multipath information. This technology is an effective solution implementing indoor with low cost. The conventional WiFi CSI-based people counting technologies have low accuracy that obstructs the high quality service. This paper proposes a deep learning people counting system based on WiFi CSI data. Data preprocessing using auto-encoder, data augmentation that transform WiFi CSI data, and a proposed deep learning model improve the accuracy of people counting. In the experimental result, the proposed approach shows 89.29% accuracy in 6 subjects.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.30-33
• /
• 2015

In this paper, we proceeded a study on the Hybrid RF based development of the smart phone Application skin disease monitoring using CMOS camera. we proposed an image transfer technology which can use the CMOS camera and we developed the smart phone application which can be possible to use a remote monitoring for skin disease. Image transfer technology using Hybrid RF communication applied for WiFi using CMOS camera. We implemented the function which can use a remote monitoring using Wi-Fi. These suggestion can be a good example for endoscopic applications using hybrid RF based smart phone application of skin disease monitoring using CMOS camera.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.163-164
• /
• 2009

최근 감시카메라의 사용률이 증가하고 있다. 개인 사업체, 전문 감시업체, 일반 기업 및 공공기관 등 감시카메라는 폭넓게 사용된다. 하지만 현재 설치된 감시카메라는 녹화된 감시영상이나 카메라 컨트롤을 관리자가 언제 어디서나 확인하고 조절할 수 없다는 단점이 있다. 이러한 단점을 해결하기 위해 TCP/IP기반의 네트워크에서 PDA로 Wi-Fi를 이용하여 접속한 후 감시카메라를 제어하거나 영상을 확인하는 방법을 제안하고 구현하였다. 제안하는 시스템은 서버 컴퓨터는 카메라의 영상을 받고 팬틸트 컨트롤을 하게한다. 클라이언트 컴퓨터는 PC와 PDA를 이용하여 서버에 접속한 뒤 실시간으로 영상을 받아오고 카메라 팬틸트를 컨트롤 한다. 본 논문에서 제안한 내용은 Wi-Fi가 사용가능한 곳에 있는 사용자가 언제 어디서나 감시카메라의 영상을 보고 컨트롤 하는데 유용할 것이다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.7
• /
• pp.935-941
• /
• 2020

People estimation is important to provide IoT services. Most people counting technologies use camera or sensor data. However, the conventional technologies have the disadvantages of invasion of privacy and the need to install extra infrastructure. This paper proposes a method for estimating the number of people using a Wi-Fi AP. We use channel state information of Wi-Fi and analyze that using deep learning technology. It can be achieved by pre-installed Wi-Fi infrastructure that reduce cost for people estimation and privacy infringement. The proposed algorithm uses a k-binding data for pre-processing process and a 1D-CNN learning model. Two APs were installed to analyze the estimation results of six people. The result of the accurate number estimation was 64.8%, but the result of classifying the number of people into classes showed a high result of 84.5%. This algorithm is expected to be applicable to estimate the density of people in a small space.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.873-877
• /
• 2019

In this paper, we analyze the degree of digital noise coupling for Inverted F Antenna (IFA) and Loop Antenna, which are representative types of portable terminal antenna, using characteristic mode. Firstly, the degree of coupling according to the direction of digital signal lines and characteristic mode current of the printed circuit board (PCB) including the antenna is compared and analyzed, and based on this result, the coupling between WiFi antenna and the front camera noise is analyzed. For analysis, the digital signal line and ground line of the FPCB of the camera module are modeled as a loop feeder that excites the characteristic mode of the PCB ground and the change of noise coupling according to the antenna types are analyzed.

• Journal of Satellite, Information and Communications
• /
• v.11 no.1
• /
• pp.21-25
• /
• 2016

In this paper, we propose an algorithm for optimal selection of communications for smart lighting in heterogeneous networks. The smart lighting can be used for information communications and lighting simultaneously. To improve BER performance of smart lighting in heterogeneous networks, it adaptively selects a communication method among OCC, Wi-Fi, BLE based on distance between sensors and smart lightings, low power consumption for user requirements, operating time of smart lighting in Line-of-Sight(LOS)/Non-LOS channels. Thus, simulation results demonstrate effectiveness of the proposed algorithm contrary to baseline methods in LOS/NLOS channels.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.327-330
• /
• 2012

In the rapid growth of cities, road has heavy traffic and many buildings are under constructions. These kinds of environments make more difficulty for a person who is visually handicapped to walk comfortable. To alleviate the problem, we introduce Android based Portable Navigation System to help walking for Visually Impaired Person. It follows, service center give instant real time monitoring to visually impaired person for their convenient by this system. Android based Portable Navigation System has GPS, Camera, Audio and WI-FI(wireless fidelity) available. It means that GPS location and Camera image information can be sent to service center by WI-FI network. To be specific, transmitted GPS location information enables service center to figure out the visually impaired person's whereabouts and mark the location on the map. By delivered Camera image information, service center monitors the visually impaired person's view. Also, they can offer live guidance to visually impaired person by equipped Audio with live talking. To sum up, Android based Portable Navigation System is a specialized navigation system that gives practical effect to realize more comfortable walking for visually impaired person.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.12
• /
• pp.2702-2707
• /
• 2012

In the rapid growth of cities, road has heavy traffic and many buildings are under constructions. These kinds of environments make more difficulty for a person who is visually handicapped to walk comfortable. To alleviate the problem, we introduce Navigation System to help walking for Visually Impaired Person. It follows, service center give instant real time monitoring to visually impaired person for their convenient by this system. This Navigation System has GPS, Camera, Audio and Wi-Fi(wireless fidelity) available. It means that GPS location and Camera image information can be sent to service center by Wi-Fi network. To be specific, transmitted GPS location information enables service center to figure out the visually impaired person's whereabouts and mark the location on the map. By delivered Camera image information, service center monitors the visually impaired person's view. Also, they can offer live guidance to visually impaired person by equipped Audio with live talking. To sum up, Android based Portable Navigation System is a specialized navigation system that gives practical effect to realize more comfortable walking for visually impaired person.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.657-659
• /
• 2018

In real life, We are using IoT technology directly. IoT technology has been applied in many fields and has developed continuously. Internet of Things is a technology or environment that attaches sensors to objects and sends and receives data through internet in real time. In this paper, if a password is wrong more than three times, the existing password is initialized and randomly changed. Changed password data seeks to realize that push alarms are sent via the app to the user or administrator. We have studied an Indono-based IoT system that can send real-time data to smart phones through WiFi. smart door locks are intended to implement them using Aduino, fingerprint sensor, camera sensor, Wi-Fi shield, Android Studio, and door lock components.