• Journal of the Korea Institute of Building Construction
• /
• v.7 no.4
• /
• pp.153-159
• /
• 2007

Recently, as a result of the economic growth, the concentration of population towards the cities and the rise in land prices, the demand for high rise buildings has increased significantly, the trend to build high rise buildings such as the mixed-use development buildings by the domestic construction companies continues. It's very important what kind of form work system is applied on the Core Wall of the high rise buildings to determine the economic efficiency for the whole project. That's because the appropriate selection of the Formwork system enables the construction cost lower, makes the good quality of the finished concrete, reduces the construction period, assurance of safety, and further more, it enables to achieve the successful performance of the projects. Therefore, this research, after comparing the strength and the weakness between the construction methods, focus the point to provide a builder the basic data to choose the right Formwork method.

• Economic and Environmental Geology
• /
• v.28 no.5
• /
• pp.513-518
• /
• 1995

A granite drilling core (-1200 m) obtained near the Majang cave in east part of the Cheju island. The rock is pinksh in color and has miarolitic cavities. It is coarse-grained rock and consists of quartz, plagioclase, alkali feldspar, biotite and magnetite. The rock shows characteristically micrographic texture. The alkali feldspar is subhedral to anhedral and generally interstitial grains and fonns micrographic texture. K/Ar age of alkali feldspar in the core specimen is $58.14{\pm}1.4Ma $ (early Tertiary). The age, rock features and whole rock chemistry of the rock has strong resemblance to micrographic granites, so called "masanite", in southeastern part of the Korean peninsular. The granitic fragments from drilling core (- 920 m) obtained in Jungmun area in south part of the Cheju island consist of quartz, plagioclase, alkali feldspar and biotite. The fragments in the Jungmun area are similar to granitic xenolith near the Cheju city for the absence of micrographic texture and different alkali feldspar.

• Nuclear Engineering and Technology
• /
• v.49 no.5
• /
• pp.928-940
• /
• 2017

An experiment using the $Prim{\ddot{a}}rkreisl{\ddot{a}}ufe$ Versuchsanlage (PKL) was performed for the OECD/NEA PKL-3 Project as a counterpart to a previous test with the large-scale test facility (LSTF) on a cold leg smallbreak loss-of-coolant accident with an accident management (AM) measure in a pressurized water reactor. Concerning the AM measure, the rate of steam generator (SG) secondary-side depressurization was controlled to achieve a primary depressurization rate of 200 K/h as a common test condition; however, the onset timings of the SG depressurization were different from each other. In both tests, rapid recovery started in the core collapsed liquid level after loop seal clearing, which caused whole core quench. Some discrepancies appeared between the LSTF and PKL test results for the core collapsed liquid level, the cladding surface temperature, and the primary pressure. The RELAP5/MOD3.3 code predicted the overall trends of the major thermal-hydraulic responses observed in the LSTF test well, and indicated a remaining problem in the prediction of primary coolant distribution. Results of uncertainty analysis for the LSTF test clarified the influences of the combination of multiple uncertain parameters on peak cladding temperature within the defined uncertain ranges.

• Nuclear Engineering and Technology
• /
• v.54 no.3
• /
• pp.803-810
• /
• 2022

The small modular liquid-metal fast reactor (SMFR) is an important component of advanced nuclear systems. SMFRs exhibit relatively low breeding capability and constraint space for control rod installation. Consequently, control rods are deeply inserted at beginning and are withdrawn gradually to compensate for large burnup reactivity loss in a long lifetime. This paper is committed to investigating the impact of control rod compensation operation on core neutronics characteristics. This paper presents a whole core fine depletion model of long lifetime SMFR using OpenMC and the influence of depletion chains is verified. Three control rod position schemes to simulate the compensation process are compared. The results show that the fine simulation of the control rod compensation process impacts significantly the fuel burnup distribution and absorber consumption. A control rod equivalent position scheme proposed in this work is an optimal option in the trade-off between computation time and accuracy. The control position is crucial for accurate power distribution and void feedback coefficients in SMFRs. The results in this paper also show that the pin level power distribution is important due to the heterogeneous distribution in SMFRs. The fuel burnup distribution at the end of core life impacts the worth of control rods.

• Journal of KIISE:Software and Applications
• /
• v.33 no.3
• /
• pp.277-288
• /
• 2006

Product line engineering (PLE) is a new effective approach to software reuse, where applications are generated by instantiating a core asset which is a large-grained reuse unit. Hence, a core asset is a key element of PLE, and therefore the reusability of the core asset largely determines the success of PLE projects. A tore asset is a reusable part not a whole system, and supports not only variable functions but also common functions. However, there are limitations to evaluate reusability of core asset that has these unique characteristics. This paper proposes a comprehensive quality system for evaluating the reusability of core assets, based on ISO/IEC 9126. We first identify the key characteristics of core assets, and derive the set of quality attributes that characterizes the reusability of core assets. finally, we define metrics for each quality attribute. In addition, we provide guidelines for applying the metrics and perform a case study based on rental product line. Using the proposed quality system, reusability of core assets can be more effectively and correctly evaluated.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.2
• /
• pp.144-150
• /
• 2002

Indian mallow is characterized by the rapid growth and high harvest of the fibrous materials. This study was carried out to investigate the sheet properties of Hanji using Indian mallow, made by different pulping methods, such as alkali and sulfomethylated pulpings and different stock compositions, various mixing ratios of bast fiber, woody core and whole stalk fibers. The results from this study were summarized as follows. The length and width of the bast fibers were 1.40-430 mm(av. 235 mm), and 9.2-26.4 ㎛(av.18.3 ㎛), respectively. The cell wall thickness was 4.0-115 ㎛(av. 7.7 ㎛). Runkel ratio, flexibility coefficient and fiber length/fiber width ratio were 1.38, 0.42 and 128 respectively. Bast fiber and whole stalk were cooked by alkali and sulfomethylated methods. Sulfomethylated pulping resulted in superior pulp in terms of yield and quality as compared with those of alkali pulping. The pulp yields of bast fiber was higher than those of whole stalk

• Journal of Digital Convergence
• /
• v.12 no.2
• /
• pp.503-511
• /
• 2014

Liberal education in colleges and universities embrace the concept of general education to enhance individual's morality, intelligence and identity. In consideration of physical education aim to develop cognitive, psychomotor and affective domains as a whole person education, liberal education and general physical education share the same values and objectives. Suppose physical education and liberal education shared same initial values, general physical education should take possession of the core means to achieve liberal education goals. To this end, it is necessary to inspect the actual statement of general physical education curriculum carefully, to find potential problems and prevent them in advance, and also explore future directions. In the current investigation, researchers found potential problems through identifying operation status of general physical education in 10 national universities. In addition, researcher provided future directions of general physical education in college and university including 'take possession of core means for liberal education', 'making diverse general physical education curriculum', 'move away from physical skill-centered education', 'general physical education as a whole body education' and 'increase opportunity of general physical education'.

• Journal of Korean Library and Information Science Society
• /
• v.48 no.2
• /
• pp.263-293
• /
• 2017

The purpose of this study is to analyze user behaviors of books in detail based on circulation data in an academic library. It analyzes circulation patterns of books for ten years from 2006 to 2015, which are surprisingly similar every year. Each pattern follows 'Loan books 20/50 rule' that 20% core collection occupies 50% of its circulation every year. This clarifies users' circulation patterns are highly consistent and very expectable. Also, using the cumulative distribution of book age, it defines the half-life of books and suggests the mathematical formula to measure it. Circulation patterns of the whole loan book and core collection for ten years are very different in terms of subjects, user groups, and divisions. This indicates that core collection plays a significant role in analyzing circulation statistics and usage patterns for the efficient collection development in the future.

• The KIPS Transactions:PartD
• /
• v.13D no.7 s.110
• /
• pp.931-938
• /
• 2006

It is important to operate an education resources which could be integrated to an system. But most of existing education information system was not developed with standardization. It is need the core education asset and reusable education service to make a good education system. Consequently, it is needed to use Sharable Content Object Reference Model(SCORM) based contents managing in order to reuse the contents of education. And it needs assembling and producing method with reusable core asset of education system to develop the application program for education. In this thesis, we study the Teaching-Learning supporting system to support systematic education resources. Teaching-Learning support system is developed of educational domain assess through development process based on Model Driven Architecture(MDA) and core asset on each stage. Application program of education is developed using MDA automatic tool through analyzing and designing for contents storage which is based on contents meta model. We finally can develop the application software of education with low cost and high productivity by raising the reusability of education contents and by using the core asset to the whole development process.

• Structural Engineering and Mechanics
• /
• v.74 no.3
• /
• pp.395-406
• /
• 2020

Many prefabricated concrete frame joints have been proposed, and most of them showed good seismic performance. However, there are still some limitations in the proposed fabricated joints. For example, for prefabricated prestressed concrete joints, prefabricated beams and prefabricated columns are assembled as a whole by the pre-stressed steel bar and steel strand in the beams, which brings some troubles to the construction, and the reinforcement in the core area of the joints is complex, and the mechanical mechanism is not clear. Based on the current research results, a new type of fabricated joint of prestressed concrete beams and confined concrete columns is proposed. To study the seismic performance of the joint, the quasi-static test is carried out. The test results show that the nodes exhibit good ductility and energy dissipation. According to the experimental fitting method and the "fixed point pointing" law, the resilience model of this kind of nodes is established, and compared with the experimental results, the two agree well, which can provides a certain reference for elasto-plastic seismic response analysis of this type of structure. Besides, based on the analysis of the factors affecting the shear capacity of the node core area, the formula of shear capacity of the core area of the node is proposed, and the theoretical values of the formula are consistent with the experimental value.