• 제목/요약/키워드: White carbon

검색결과 193건 처리시간 0.024초

Draft Genome Sequence of the White-Rot Fungus Schizophyllum Commune IUM1114-SS01

  • Kim, Da-Woon;Nam, Junhyeok;Nguyen, Ha Thi Kim;Lee, Jiwon;Choi, Yongjun;Choi, Jaehyuk
    • Mycobiology
    • /
    • 제49권1호
    • /
    • pp.86-88
    • /
    • 2021
  • The monokaryotic strain, Schizophyllum commune strain IUM1114-SS01, was generated from a basidiospore of dikaryotic parental strain IUM1114. It even showed the decolorizing activities for several textile dyes much better than its parental strain. Based on the results of a single-molecule real-time sequencing technology, we present the draft genome of S. commune IUM1114-SS01, comprising 41.1 Mb with GC contents of the genome were 57.44%. Among 13,380 protein-coding genes, 534 genes are carbon hydrate-active enzyme coding genes.

활성탄의 첨가급여가 돈육의 이화학적 특성과 지방산 조성에 미치는 효과 (Effects of Dietary Activated Carbon on Physico-Chemical Characteristics and Fatty Acid Composition of Pork)

  • 문성실;신철우;강근호;주선태;박구부
    • 한국축산식품학회지
    • /
    • 제22권2호
    • /
    • pp.145-150
    • /
    • 2002
  • 본 연구는 돼지사료내 활성탄 첨가 급여가 돈육의 품질에 미치는 효과를 알아보고자 등심과 삼겹부위를 이용하여 일반성분, 조직적 특성, 관능적 특성 및 지방산을 분석하였다. 분석결과 활성탄 첨가급여로 인해 일반성분, pH, 가열감량에 있어서는 별다른 영향을 미치지 않았지만, 육의 기호성과 조직적 특성에는 영향을 미치는 것으로 나타났는데, 특히 경도의 경우 활성탄 첨가구가 대조구에 비해 유의적으로(p<0.05) 높게 나타났다(p<0.05). 지방산 분석결과, 등심부위의 palmitic acid 함량은 대조구가 활성탄 첨가급여구에 비해 유의적으로 높은 반면, oleic acid, linoleic acid 및 linolenic acid 함량은 활성탄 첨가급여구가 유의적으로(p<0.05) 높게 나타났다. 삼겹부위에서는 대조구가 활성탄 첨가급여구에 비해 stearic acid 함량이 유의적으로(p<0.05) 높게 나타났다. 이상의 결과를 종합해 볼 때 돼지사료내 활성탄을 첨가함으로써 돈육의 품질에 미치는 효과는 미미했으나, 지방산 조성에 있어서는 불포화 지방산의 함량이 증가하는 것으로 보아, 이에 대한 명확한 연구를 위해서는 조사두수의 확대와 급여수준에 대한 연구가 더 필요할 것으로 사료된다.

산전 금-은 광상에 관한 광물 및 지화학적 연구 (Mineralogy and Geochmistry of the Sanjeon Au-Ag Deposit, Wonju Area, Korea)

  • Se-Hyun Kim
    • 자원환경지질
    • /
    • 제32권5호
    • /
    • pp.445-454
    • /
    • 1999
  • 산전 금-은 광상은 석영 반암내에 반암내에 발달된 열극을 충진한 석영+방해석의 열수맥광상이다. 광화작용은 단일 시기에 형성되었으며, 시간에 따라 다음과 같이, (2) 초기, 백석 석영+황철석+유비철석+심야연석; (2)중기, 백석-투명 석영+황화광물 (황철석, 섬아연석, 황동석, 방연석)+에렉트럼+휘은석; (3)후기, 방해석+황철석+자연은의 정출이 있었다. 금-은의 주요 광화기인 중기 광화유체의 온도와 NaCl 상당 염농도는 $210^{\circ}$~$250^{\circ}C$와 4~5wt.%이고, 황분압은 -14.0~-12.2atm 으로 금-은 침전은 천수의 혼입작용에 기인한 것으로 보인다. 산소 및 수소동위원소 분석에 의하면, 광화작용이 진행되에 따라 양자 모두 감소하는 경향을 갖는다. 이는 광화작용이 진행됨에 따라 천수의 혼입이 증가하기 때문으로 해석된다.

  • PDF

PP/PDMS 복합막을 이용한 혈청누출 제어 (Serum Leakage Control using PP/PDMS Composite Membrane)

  • 김기범;이삼철;정순량;정경락
    • 멤브레인
    • /
    • 제10권1호
    • /
    • pp.47-53
    • /
    • 2000
  • 인공폐는 실제 폐의 기능을 대행하는 장치이며, 주요 기능은 정맥혈에서 이산화탄소를 제거하고 산소를 첨가하여 동맥혈화하여 개심수술시 신체의 모든 조직에 충분한 양의 동맥혈을 공급한다. 또한 체외순환 생명보조장치(ECLS 또는 ECMO)는 심한 호흡부전증에 일반적으로 이용되지만 미래의 폐 이식에 사용될 것이다. 현재 미세다고엉 폴리프로필렌 중공사를 사용하고 있는 막형 인공 폐는 두 가지 문제가 있다. 환자의 체계적인 항응고가 필요하며, 오랜 기간의 사용은 막을 통하여 혈액 쪽에서 가스 쪽으로 혈청 누출을 일으킨다. 본 연구는 미세다공성 폴리프로필렌(PP)막에 폴리디메틸실록산(PDMS)을 적충한 PP/PDMS막을 제조하고, 폴리프로필렌 막에서 유발하는 혈청 누출을 최소화하는 기술에 대하여 연구하였다. Lee-White법에 의한 whole blood의 혈전형성 실험 후 사용된 막의 기체 투과도는 PP막에서는 크게 저하되었지만, PP/PDMS막에서는 거의 동일하게 유지되었다. 그러므로 PP막에서 유발되는 혈청 누출을 PP/PDMS막에서는 해결할 수 있었다. 또한, PP/PDMS막에서는 이산화탄소의 기체토과율이 산소보다 11.5배였다.

  • PDF

Isolation and Characterization of a Feather Degrading Alkalophilic Streptomyces sp. TBG-S13A5 and its Keratinolytic Properties

  • Indhuja, Selvaraj;Shiburaj, Sugathan;Pradeep, Nediyaparambu Sukumaran;Thankamani, Vaidyanathan;Abraham, Teruvath Koshy
    • 한국미생물·생명공학회지
    • /
    • 제40권4호
    • /
    • pp.303-309
    • /
    • 2012
  • Keratinases are of particular interest because of their action on insoluble keratins and generally on a broad range of protein substrates. Alkalophilic and neutrophilic actinomycete strains isolated from different soil samples, rich in keratinaceous substances were screened for keratinolytic activity. An alkalophilic isolate, TBG-S13A5, was found to possess good keratinolytic activity and was able to utilize feather as the sole carbon and nitrogen source. TBG-S13A5 exhibited an off-white aerial mass color with a rectus-flexibilis type of spore chain. The morphological, microscopical and biochemical characters were comparable with that of Streptomyces albidoflavus. Fatty acid methyl ester profiling (FAME) and 16S rDNA sequence analysis confirmed its identity as a strain of S. albidoflavus. Under submerged fermentation conditions, maximum protease production was recorded on the $5^{th}$ day of incubation at $30^{\circ}C$, using basal broth of pH 9.0 with 0.25% (w/v) white chicken feather. This strain could affect feather degradation when the initial pH was 8 and above and maximum protease production was recorded when the initial pH was around 10.5. The effectiveness of the crude enzyme in destaining and leather dehairing were also demonstrated.

Characterization of β-Glucosidase Produced by the White Rot Fungus Flammulina velutipes

  • Mallerman, Julieta;Papinutti, Leandro;Levin, Laura
    • Journal of Microbiology and Biotechnology
    • /
    • 제25권1호
    • /
    • pp.57-65
    • /
    • 2015
  • β-Glucosidase production by the white rot fungus Flammulina velutipes CFK 3111 was evaluated using different carbon and nitrogen sources under submerged fermentation. Maximal extracellular enzyme production was 1.6 U/ml, corresponding to a culture grown in sucrose 40 g/land asparagine 10 g/l. High production yield was also obtained with glucose 10 g/land asparagine 4 g/l medium (0.5 U/ml). Parameters affecting the enzyme activity were studied using p-nitrophenyl-β-D-glucopyranoside as the substrate. Optimal activity was found at 50℃ and pHs 5.0 to 6.0. Under these conditions, β-glucosidase retained 25% of its initial activity after 12 h of incubation and exhibited a half-life of 5 h. The addition of MgCl2, urea, and ethanol enhanced the β-glucosidase activity up to 47%, whereas FeCl2, CuSO4, Cd(NO3)2, and cetyltrimethylammonium bromide inflicted a strong inhibitory effect. Glucose and cellobiose also showed an inhibitory effect on the β-glucosidase activity in a concentration-dependent manner. The enzyme had an estimated molecular mass of 75 kDa. To the best of our knowledge, F. velutipes CFK 3111 β-glucosidase production is amongst the highest reported to date, in a basidiomycetous fungus.

Preparation and Characterization of Palladium Nanoparticles Supported on Nickel Hexacyanoferrate for Fuel Cell Application

  • Choi, Kwang-Hyun;Shokouhimehr, Mohammadreza;Kang, Yun Sik;Chung, Dong Young;Chung, Young-Hoon;Ahn, Minjeh;Sung, Yung-Eun
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권4호
    • /
    • pp.1195-1198
    • /
    • 2013
  • Nickel hexacyanoferrate supported palladium nanoparticles (Pd-NiHCF NPs) were synthesized and studied for oxygen reduction reactions in direct methanol fuel cell. The NiHCF support was readily synthesized by a comixing of $Ni(OCOCH_3)_2$ and equimolar $K_3[Fe(CN)_6]$ solution into DI water under rigorous stirring. After the preparation of NiHCF support, Pd NPs were loaded on NiHCF via L-ascorbic acid reduction method at $80^{\circ}C$. Pd-NiHCF NPs were electrochemically active for oxygen reduction reaction in 0.1 M $HClO_4$ solution. X-ray absorption near edge structure analysis was conducted to measure the white line intensity of Pd-NiHCF to verify the OH adsorption. As a comparison, carbon supported Pd NPs exhibited same white line intensity. This study provides a general synthetic approach to easily load Pd NPs on porous coordination polymers such as NiHCF and can provide further light to load Pd based alloy NPs on NiHCF framework.

16세기 감로도의 과학적 조사와 보존 (Scientific Analysis and Conservation of Nectar Ritual Painting in the 16th Century)

  • 안지윤;천주현;김수연
    • 박물관보존과학
    • /
    • 제14권
    • /
    • pp.13-22
    • /
    • 2013
  • 국립중앙박물관 소장 감로도(증7551)는 16세기에 제작된 것으로 추정되며 일본 교토[京都]의 류간지[龍岸寺] 주지인 에지마고도씨가 2010년 기증하였다. 전체적으로 화면과 회장 견의 결실, 얼룩, 꺾임, 충해 등에 의한 손상이 심하여 이에 대한 보존처리를 필요로 하였다. 보존처리는 표면오염을 제거하고 결실부위 보수 후 본래의 형식대로 장황하였다. 회장부분과 화면부분의 직물 조사결과 견직물과 마직물을 사용하였다. 채색안료는 크게 여섯 가지 색의 계열로 나눌 수 있으며, 붉은색은 진사, 연단, 노란색은 황단, 금, 백색은 연백, 녹색은 석록, 푸른색은 석청, 검정색은 먹을 사용하였다.

삼국시대(三國時代) 철기유물(鐵器遺物)의 제작기술(製作技術) 연구(硏究) (Iron Technologies of the Three Kingdoms Period in Korea)

  • 정광용
    • 헤리티지:역사와 과학
    • /
    • 제35권
    • /
    • pp.138-158
    • /
    • 2002
  • To compare and analyze technical system related to manufacturing of ironware during the period of the Three Kingdoms, an analysis was conducted on the minute system of metalwork, as study objects, of the remains of the Mt. Wolpyeong fortress wall in Daejeon in the period of capital during the era of the Three Kingdoms in the 5th century, the Sanwol-ri remains in the 6th century in Gunsan and the remains of ironware excavated from the great ancient tomb of Hwangnam of the Silla dynasty in the 5th century. The result of analysis shows that in the most of the casting products, the minute system of white cast iron were contained. While the iron part of decarbonization was in the system by casting as white cast iron in the central part, on the surface layer it was turned out that comparatively uniform 100% pearlite system of about 1~2mm degree was existing. The part of pearlite on the surface layer was caused by decarbonization, which appears in all the parts of blade front end and handle. Therefore, it was found that the iron part of decarbonization was manufactured by casting, and then was processed at the high temperature by decarbonization. For the products of forging, after processing the products on the basis of pure iron for materials, they manufactured the ironware that raises the strength by carbonizing that keeps carbon infiltrated on the necessary part, by the method of black smith welding that add pure iron to steel, or by varying the method of heat processing onto the part required of strength. Though limited, we could understand that the technical systems for manufacturing skill of ironware in the areas of Baekje and Silla were different each other. In the technical system for Hwangnam great ancient tomb in the Silla area, it is found that they had raised the strength on the necessary part by applying the steelmaking method of carbonizing in the last stage of production of products, in the meantime in Baekje area, it appears that they had produced steel in advance in the first stage of production of the products, and used the produced steel only to the necessary part.

Electrochemical Oxygen Evolution Reaction on NixFe3-xO4 (0 ≤ x ≤ 1.0) in Alkaline Medium at 25℃

  • Pankaj, Chauhan;Basant, Lal
    • Journal of Electrochemical Science and Technology
    • /
    • 제13권4호
    • /
    • pp.497-503
    • /
    • 2022
  • Spinel ferrites (NixFe3-xO4; x = 0.25, 0.5, 0.75 and 1.0) have been prepared at 550℃ by egg white auto-combustion route using egg white at 550℃ and characterized by physicochemical (TGA, IR, XRD, and SEM) and electrochemical (CV and Tafel polarization) techniques. The presence of characteristic vibration peaks in FT-IR and reflection planes in XRD spectra confirmed the formation of spinel ferrites. The prepared oxides were transformed into oxide film on glassy carbon electrodes by coating oxide powder ink using the nafion solution and investigated their electrocatalytic performance for OER in an alkaline solution. The cyclic voltammograms of the oxide electrode did not show any redox peaks in oxygen overpotential regions. The iR-free Tafel polarization curves exhibited two Tafel slopes (b1 = 59-90 mV decade-1 and b2 = 92-124 mV decade-1) in lower and higher over potential regions, respectively. Ni-substitution in oxide matrix significantly improved the electrocatalytic activity for oxygen evolution reaction. Based on the current density for OER, the 0.75 mol Ni-substituted oxide electrode was found to be the most active electrode among the prepared oxides and showed the highest value of apparent current density (~9 mA cm-2 at 0.85 V) and lowest Tafel slope (59 mV decade-1). The OER on oxide electrodes occurred via the formation of chemisorbed intermediate on the active sites of the oxide electrode and follow the second-order mechanism.