• 한국세라믹학회지
• /
• 제52권4호
• /
• pp.229-233
• /
• 2015

Currently, the majority of commercial white LEDs are phosphor converted LEDs made of a blue-emitting chip and YAG yellow phosphor dispersed in organic silicone. However, silicone in high-power devices results in long-term performance problems such as reacting with water, color transition, and shrinkage by heat. Additionally, yellow phosphor is not applicable to warm white LEDs that require a low CCT and high CRI. To solve these problems, mixing of green phosphor, red phosphor and glass, which are stable in high temperatures, is common a production method for high-power warm white LEDs. In this study, we fabricated conversion lenses with LUAG green phosphor, SCASN red phosphor and low-softening point glass for high-power warm white LEDs. Conversion lenses can be well controlled through the phosphor content and heat treatment temperature. Therefore, when the green phosphor content was increased, the CRI and luminance efficiency gradually intensified. Moreover, using high heat treatment temperatures, the fabricated conversion lenses had a high CRI and low luminance efficiency. Thus, the fabricated conversion lenses with green and red phosphor below 90 wt% and 10 wt% with a sintering temperature of $500^{\circ}C$ had the best optical properties. The measured values for the CCT, CRI and luminance efficiency were 3200 K, 80, and 85 lm/w.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 춘계학술대회 논문집
• /
• pp.3-6
• /
• 2008

The purpose of this study is to investigate the luminous environment of fluorescent lamp and LED lamp in a office space for various color temperature by subject response test. For this, three different color temperatures were tested for the same illuminance level. Based on such test results for various color temperatures of fluorescent lamp and white LEDs, this study is to analyze the preferences of color temperature and light source, and perceptional brightness of each light source and color temperature. Then, this study is to derive the guidelines for the performance of color temperature which are suitable on the purpose and the mood of a office space.

• Current Optics and Photonics
• /
• 제3권1호
• /
• pp.78-85
• /
• 2019

The remote phosphor structure has been proven to bear greater luminous efficiency than both the conformal phosphor and in-cup phosphor structures; however, controlling its color quality is much more challenging. To solve this dilemma, various researchers have proposed dual-layer phosphor and triple-layer phosphor configuration as techniques to enhance the display brightness of white LEDs (WLEDs). Likewise, this study picked one of these configurations to utilize in multichip WLEDs with five distinct color temperatures in the range from 5600 to 8500 K, for the purpose of improving the optical properties of WLEDs, such as color rendering index (CRI), color quality scale (CQS), luminous efficacy (LE), and chromatic homogeneity. According to the results of this research, the triple-layer phosphor configuration has superior performance compared to other configurations in terms of CRI, CQS, and LE, and yields higher chromatic stability for WLEDs.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.244-246
• /
• 2007

The LCD backlight technique using light-emitting diode(LED) has been studied in the recent backlight market. The white light is need for LCD backlight and it is generally implemented by combining the RGB-LEDs to obtain the high brightness. However, RGB-LEDs have different color characteristics for the current and temperature variations, which results in the color shift problem. The color shift characteristics of RGB-LEDs for the current and temperature variations are investigated in this paper. This result can be used to control the color of backlight system using RGB-LEDs.

• Transactions on Electrical and Electronic Materials
• /
• 제15권2호
• /
• pp.69-72
• /
• 2014

White LEDs, based on blue LED chips coated with a yellow emitting phosphor (YAG:Ce), have several disadvantages. In this paper, we report the improvement in CRI [Color Rendition Index] using $GdAl_5O_{12}:Ce$ (GdAG:Ce) and related phosphors for blue LEDs. A modified combustion synthesis route using mixed fuel was used for synthesis route. By using this procedure, we formed the desired compounds in a single step. LEDs were then fabricated by coating the blue LED chips (CREE 470 nm, 300 micron) with the GdAG:Ce phosphor dispersed in epoxy resin. The CRI typically between 65~70 for the YAG:Ce based LED was improved to 87 for LEDs fabricated from the Gd(Al,Ga)G phosphors.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.274-277
• /
• 1996

This paper describes the realization of the full-color to the degree of nearest white light by compounding high brightness Red, Green and Blue LEDs with appropriate proportional index. Once these three colors; red, green and blue are mixed, they are genearlly additive mixing and produce white light color contrasted to negative mixing. The luminous efficiency is defined as the product of the efficiency(lm/w), which indicates the degree of perceptual response by the human eye to unit energy(W) of light emitted by an active display devises and as the conversion efficiency of the device from electric power consumed to optical energy produced. We will deduce the each number of LEDs theoretically and design several shapes of LED displays for the full-color. Finally theoretical predictions will be compared with the measured data with different type of display designs.

• 한국광학회지
• /
• 제24권2호
• /
• pp.64-70
• /
• 2013

본 논문에서는 청색 LED 칩에 YAG:Ce와 $(Sr,Ba)_2SiO_4:Eu$ 등 두 종류의 황색 형광체를 적용해서 제작한 백색 LED의 발광특성을 비교, 분석하였다. 두 백색 LED의 발광 스펙트럼의 특성을 분석하기 위한 수학적 함수 형태로써 Asymmetric double sigmoidal 함수를 적용할 수 있음을 확인하였고 이를 통해 발광 스펙트럼을 구성하는 피크들의 중심파장, 폭, 비대칭성에 대한 정보를 정량적으로 구해서 비교하였다. 분석 결과 실리케이트계 형광체의 발광 스펙트럼 폭이 YAG 형광체에 비해 더 좁아 연색지수의 측면에서 불리한 반면 구동전류에 따른 색도 안정성의 측면에서는 더 유리하다는 것을 확인하였다. 두 백색 LED의 발광효율은 구동전류의 증가에 따라 단조감소하였는데, 실리케이트 형광체 기반 LED의 발광효율이 YAG형광체 기반 LED에 비해 약 10~12 lm/W 정도 작음을 확인하였다.

• 조명전기설비학회논문지
• /
• 제29권6호
• /
• pp.27-34
• /
• 2015

There has been a critical issue in optical simulation of phosphors in LEDs due to their light-reabsorption properties. To improve the accuracy of optical modeling for a white LED package, we utilized the spectrum data of the phosphor-dispersed encapsulant film instead of the phosphor powder. By measuring white LED packages with green and red phosphors, the maximum difference between simulation and experimental results of a color temperature, a color rendition index number and a color coordinate corresponds to ${\Delta}T=95K$, ${\Delta}Ra=1.7$ and ${\Delta}xy=0.007$, respectively. Based on those results, the proposed method can well explain the change of emission spectra of white LEDs with more than two phosphors which introduce the complex optical phenomena such as absorption, reabsorption, light emission, reflection and scattering, etc.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2005년도 춘계학술발표대회 및 제8회 신소재 심포지엄 논문개요집
• /
• pp.174-174
• /
• 2005

• 산업경영시스템학회지
• /
• 제46권3호
• /
• pp.59-68
• /
• 2023

Currently, yellow phosphor of Y3Al5O12:Ce3+ (YAG:Ce) fluorescent material is applied to a 450~480nm blue LED light source to implement a white LED device and it has a simple structure, can obtain sufficient luminance, and is economical. However, in this method, in terms of spectrum analysis, it is difficult to mass-produce white LEDs having the same color coordinates due to color separation cause by the wide wavelength gap between blue and yellow band. There is a disadvantage that it is difficult to control optical properties such as color stability and color rendering. In addition, this method does not emit purple light in the range of 380 to 420nm, so it is white without purple color that can not implement the spectrum of the entire visible light spectrum as like sunlight. Because of this, it is difficult to implement a color rendering index(CRI) of 90 or higher, and natural light characteristics such as sunlight can not be expected. For this, need for a method of implementing sunlight with one LED by using a method of combining phosphors with one light source, rather than a method of combining red, blue, and yellow LEDs. Using this method, the characteristics of an artificial sunlight LED device with a spectrum similar to that of sunlight were demonstrated by implementing LED devices of various color temperatures with high color rendering by injecting phosphors into a 405nm deep blue LED light source. In order to find the spectrum closest to sunlight, different combinations of phosphors were repeatedly fabricated and tested. In addition, reliability and mass productivity were verified through temperature and humidity tests and ink penetration tests.