• 제목/요약/키워드: Whirl frequency ratio

검색결과 12건 처리시간 0.016초

공동현상 모델에 따른 침수형 평면 저널베어링의 동특성 및 회전 안정성에 대한 연구 (Dynamic Characteristics and Instability of Submerged Plain Journal Bearings in accordance with the Cavitation Model)

  • 최문호
    • Tribology and Lubricants
    • /
    • 제39권4호
    • /
    • pp.139-147
    • /
    • 2023
  • Cavitation phenomena observed during the operation of a submerged plain journal bearing (PJB) can affect bearing performance parameters such as dynamic coefficients, whirl frequency ratio, and critical mass. This study presents numerical solutions of the Reynolds equation for steadily and dynamically loaded submerged PJBs with half-Sommerfeld (HS), Reynolds, and Jakobsson-Floberg-Olsson (JFO) cavitation models when the supply pressure is larger or equal to the cavitation pressure. The loads at various eccentricity ratios are identical; however, the attitude angle is approximately 6% smaller when the eccentricity ratio is between 0.2 and 0.7 and the JFO model is used, compared to that when the Reynolds model is used. Dynamic coefficients obtained with the HS and Reynolds model show good agreement with each other, except for kxz, which is sensitive to changes in the force normal to the rotor weight, and is attributed to the difference in the attitude angle obtained with each cavitation model. Stiffness coefficients are determined using the pressure distribution in the film, and therefore, when the JFO model is used, the direct stiffness coefficients are affected and show opposite signs for most eccentricity ratios. The mass-conservative JFO model can predict at least a 30% smaller critical mass compared to that using the HS and Reynolds models. Thus, the instability analysis results can change based on the cavitation model used in a submerged PJB. The results of this research indicate that the JFO model should be used when designing a rotor system supported by submerged PJBs.

와권(渦卷) 노즐의 무화기구(霧化機構)에 관(關)한 연구(硏究) (A Study on the Atomizing Mechanism for the Swirl Nozzle)

  • 이상우;판정순;석원앙
    • 농업과학연구
    • /
    • 제14권1호
    • /
    • pp.81-97
    • /
    • 1987
  • 병충해방제(病蟲害防除)에 있어서 효율적(效率的)인 분무립자(噴霧粒子)의 크기는 $20{\mu}m$ 이내(以內)이지만 비산(飛散)의 해(害)를 감안하여 $140{\sim}200{\mu}m$를 추천하고 있다. 그러나 우리나라 수도방제기(水稻防除機)의 주종(主種)인 총포노즐의 경우 입자(粒子)크기는 $220{\sim}750{\mu}m$로 과대(過大)한 실정(實情)이다. 우리나라에서 널리 이용(利用)되고 있는 과권(過卷) 노즐의 구조(構造)를 Figure 2와 같이 고안(考案)하여 공기(空氣)를 혼합(混合)시킨 약액(藥液)을 이용(利用)함으로써 과실내(過室內)에서의 예비무화효과(豫備霧化效果), 약액(藥液)의 감소된 표면장력(表面張力) 및 점주(粘住), 분사액(噴射液)의 증가된 주파수(周波數)의 효과(效果)를 이용(利用)하여 분무립자(噴霧粒子)를 개선(改善)하고저 실시(實施)된 실험결과(實驗結果)는 다음과 같다. 분무립자(噴霧粒子) 크기는 분무압력(噴霧壓力)(본(本) 실험(實驗)에서는 $0.70kg/cm^2$부터 $6.33kg/cm^2$까지 실시(實施)) 이 증가(增加)됨에 따라서 점차로 미립화(微粒化)되었고 이 경향(傾向)은 표준(標準)노즐의 결과(結果)와 같다. 동일(同一)한 분무압력하(噴霧壓力下)에서 분무립자(噴霧粒子)의 크기 및 분포상태(分布狀態)를 표준(標準)노즐의 비교(比較)할 때 체적평균직경(體積平均直徑)이 작아졌고 입자(粒子)크기 분포(分布)도 개선(改善)되었다. 입자(粒子)크기 분포(分布)는 분무형(噴霧型)의 중심(中心)으로부터 외측(外側)으로 향(向)하면 체적평균직경(體積平均直徑)이 작아지는 현상(現象)이었다.

  • PDF