• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2473-2475
• /
• 2001

In trajectory tracking methods, the error values of current position and velocity are compensated to follow the given reference path and velocity. The path tracking for a wheeled mobile robot is treated in this paper. It is very difficult to implement stable trajectory tracking algorithms because mobile robots have kinematically non-holonomic constraints. For solving this problem, a velocity controller is presented in this paper. This velocity controller is designed by a PID controller which could be easily employed. In this case, velocity errors caused by system uncertainties or internal and external disturbances could exist. A neural network is used for compensating the velocity errors. Input variables of this neural network compensator are defined by differences between the velocities of the posture controller and the real velocities of the mobile robot. Simulation results show the effectiveness of the proposed controller.

• 한국정보통신학회논문지
• /
• 제15권7호
• /
• pp.1447-1456
• /
• 2011

본 논문에서는 다중 입력을 가지는 비선형 시스템의 제어기 설계를 위한 다중 입력 T-S 퍼지 궤환 선형화 기법이 제안되었으며 그 기법을 바퀴형 이동로봇의 궤도 추적 제어를 위한 제어기를 설계하는 데에 사용하였다. 이를 위하여, 먼저 바퀴형 이동로봇의 에러 동특성 방정식을 T-S 퍼지 모델로 나타내었고, 이 퍼지 모델을 비선형 퍼지 좌표 변환과 비선형 상태 궤환 입력에 의해 하나의 선형 제어 시스템으로 변환시켰다. 시뮬레이션 결과는 본 논문에서 제안된 다중 입력 궤환 선형화 기법에 의해 설계된 궤도 추적 제어기가 T-S 퍼지 시스템을 제어하기 위해 널리 사용되어지는 기존의 PDC 기법에 의해 설계된 궤도 추적 제어기보다 더 나은 성능을 제공함을 보여주었다.

• 한국지능시스템학회논문지
• /
• 제25권6호
• /
• pp.578-584
• /
• 2015

본 연구에서 자동화된 기립 및 복귀 시스템이 적용된 직립주행이 가능한 이동로봇용 구동 플랫폼이 개발되었다. 종래 대부분의 이동로봇은 정역학적으로 안정된 평면형의 4륜 혹은 3륜 구동형으로 구성되어 있는데, 이러한 형태의 이동로봇은 방향 전환을 위해서 독립구동형 혹은 조향형 차륜을 갖추고 있다. 이동로봇이 매우 협소한 지형에서 직각으로 굽은 통로를 주행할 때, 이동로봇은 전후진을 반복하는 등 복잡한 조향동작을 필요로 하거나, 극단적인 경우, 물리적인 조향이 불가능한 경우에 처하게 된다. 직립주행이 가능한 이동로봇은 점유면적이 작은 직립된 상태로 몸체의 형상을 변형시켜 해당 지형을 원활하게 통과할 수 있다. 본 연구에서 기립(복귀)동작, 확인동작, 평형제어 순으로 각 단계가 수동으로 조작되었던 기립제어 단계가 몸체의 기울기 각도 검출로 자동화되어, 단일 자동제어로 조작되는 차륜형 역진자 시스템이 제안되었다.

• 제어로봇시스템학회논문지
• /
• 제16권4호
• /
• pp.353-360
• /
• 2010

A skid-steering method which applied to the various mobile robot platforms currently shows its effectiveness in the specified field areas and purposes. This system contains however, several problems of its intrinsic properties such as slippages occurred by different moving direction between vehicle's driving and wheel's rotary and difficulties of driving performance control and so on. This paper deals with the suggestion of suitable control algorithm for 6WD/6WS skid steering wheeled vehicle and verified its feasibility by analyzing the behavior of 6WD/6WS skid-steered wheeled vehicle model and by applying the engineering analytical method to the considered mobile platform. The Performance of vehicle model is evaluated by using slip mode control to follow the steering input and, as a future work, this control algorithm could be applied to real 6WD/6WS in-wheel drive type vehicle finally.

• 전기학회논문지
• /
• 제58권9호
• /
• pp.1827-1833
• /
• 2009

This paper deals with the trajectory tracking control of wheeled mobile robots with input constraint. The proposed method converts the trajectory tracking problem to the system stability problem using the control inputs composed of feedforward and feedback terms, and then, by using Taylor series, nonlinear terms in origin system are transformed into polynomial equations. The composed system model can make it possible to obtain the control inputs using numerical tool named as SOSTOOL. From the simulation results, the mobile robot can track the reference trajectory well and can have faster convergence rate of the trajectory errors than the existing nonlinear control method. By using the proposed method, we can easily obtain the control input for nonlinear systems with input constraint.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.120.4-120
• /
• 2001

In this paper, a method of generating trajectories in real time for a mobile robot in a dynamic environment is proposed. Specifically, this method is focused on soccer-playing robots that need to calculate trajectories in real time, which are constantly subject to rapidly change as targets and obstacles move. The robots also should move at the fastest available speed, while tracking the generated trajectories. The method proposed in this paper solves the geometric problem of finding a smooth curve that joins two endpoints. To have this solved, we assign five constraints to each endpoint, which are the usual x, y, theta, and curvature as well as the influence of the initial robot velocity on the path. With these five constraints, the path generated can always be physically followed by robot. Through this method, the travel time of the robot over the entire path can b optimized. Therefore it can ...

• 제어로봇시스템학회논문지
• /
• 제19권12호
• /
• pp.1145-1151
• /
• 2013

Kinematic modeling is a prerequisite for motion planning and the control of mobile robots. In this paper, we proposed a new method of kinematic modeling for a type of mobile robot based on differential motion transformation. The differential motion implies a small translation and rotation in three-dimensional space in a small time interval. Thus, transformation of the differential motion gives the velocity relationship, i.e., Jacobian between two coordinate frames. Since the theory of the differential motion transformation is well-developed, it is useful for the systematic velocity kinematic modeling of mobile robots. In order to show the validity for application of the differential motion transformation, we obtained velocity kinematic models for a type of exemplar mobile robot including spherical ballbots.

• 전자공학회논문지 IE
• /
• 제46권4호
• /
• pp.73-77
• /
• 2009

본 논문에서는 모바일 로봇의 경로 주총 제어에 관해 다룬다. 설계된 제어기는 운동학 제어기와 동역학 제어기로 구성된다. 운동학 제어기는 2개의 게인을 가짐에 따라 기존의 3개의 게인을 가지는 제어기에 비해 게인 설정에 필요한 시간을 줄일 수 있다. 동역학 제어기는 마찰력과 외란 보상을 고려하여 다양한 환경에서 경로 추종 성능을 개선시킬 수 있다. 모의실험 결과를 통해 제안된 제어기의 안정된 성능을 확인할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1337-1338
• /
• 2015

In this paper, a new control technique using WIPDC(Weighted Integral Parallel Distributed Compensation) and ISMC(Integral Sliding Mode Control) is proposed for high performance and robust trajectory tracking control of a wheeled mobile robot. The WIPDC reduces the steady-state error by adding a weighted integral controller to the PDC. So, the trajectory tracking control using the WIPDC can obtain more accurate control performance than the PDC. And the ISMC based control input gives the mobile robot to preserve the system dynamics controlled by the WIPDC control input in spite of external disturbances. Therefore, the proposed control method shows a robust and precise trajectory tracking performance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.490-496
• /
• 1995

A four-legged mobile robot can move on the plain terrain with mobility and stability, but if there exist any obstacles on the terrain of the motion direction, it takes extra times for a mobile robot to cross those obstacles and the stability should be considered during motion. The main objevtive is the study of a quadruped which can cross obstacles with better mobility, stability and fuel economy than any other wheeled or tracked vehicles. Vertical step, isolated wall and ditch are the basic obstacles and by understanding those three cases perfectly, a quadruped can move on any mixed rough terrain as 4-legged animal moves. Each leg of a determine the crossing capability in a static analysis. A quadruped can be simplified with links and joints. By applying the research method, a quadruped can determine the control procedures as soon as it receives the terrain informations from scanner and finally can be moved as animals move with mobility and stability.